Question about 1999 Oldsmobile Cutlass

Open Question

1999 olds cutlass no power to the cooning fan

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan motor for a 1999 cutless Oldsmobile how do you replace it


You need to test before replacing , there are three relays , the PCM - engine computer controls them . You wouldn't like replacing an find they still don't work ! Would you ? Relay Driven Dual Cooling Fan Diagnostics watch this training class ,your olds is the same ! If after watching this an your not should ,take your vehicle to a qualified repair shop !

Sep 25, 2016 | 1999 Oldsmobile Cutlass

1 Answer

Thks for help on my 1999 oldsmobilecutlass and now I ask?


Did you buy the car new or used. it sounds like the fan is controlled by the AC switch

Oct 09, 2014 | 1999 Oldsmobile Cutlass

2 Answers

Plif my cooling fans stop working ,is it most likely the fan moto or reley switch


look at temp control switch that turns fans on its a sensor mounted on motor or close to fans

Oct 07, 2014 | 1999 Oldsmobile Cutlass

1 Answer

Where is the cooling fan relay on 1994 oldsmobile cutlass ciera


The fan relay should be one of the four on the firewall under the windshield. You may need a shop manual to get the wiring diagrams to test it.
If you have power and ground at the fan motor and it does not run, the motor may be faulty.

May 22, 2012 | 1994 Oldsmobile Cutlass Ciera

1 Answer

99 olds cutlass blower motor resistor


remove glove box to get better access to the blower motor. resistor is located beside the blower fan motor. with glove box removed, then you will not have to stand on your head doing the job, good-day!

Jan 29, 2012 | 1999 Oldsmobile Cutlass

1 Answer

Blower motor sounds like it is going to stop. how hard is it to replace?


here are the instructions for fan blower removal. remove lower right dash insulator panel from under glove box. slide the body control module aside for access to the blower motor.( bcm ). remove the 3 screws that hold it in. pull the blower motor and fan straight down and dis connect electrical connector. if replacing blower motor, remove fan to put on new motor. 99 olds cutlass, have a good day !! just take your time and it is not that hard.

Jan 22, 2011 | 1999 Oldsmobile Cutlass

2 Answers

How to replace a blower motor on a 99 oldsmobile cutlass


remove lower right dash insulator panal from beneath glove box. slide bcm aside to get to blower. remove the three screws holding the blower motor, pull blower and fan straight out. remove fan from old blower if replacing with a new motor. good-luck!!

Jul 17, 2010 | 1999 Oldsmobile Cutlass

1 Answer

How do I remove the power steering pump to replace the heater fan


Here's what I did. I took a pair of snips and cut the fan blades in half. By doing that made just enough clearance to work that thing in there. My fan blows just fine and will probably outlive the rest of the car.

Mar 07, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1999 Oldsmobile Cutlass Cigarette Lighter Fuse


Under the hood directly in front of the driver is a covered fuse block. Remove the cover and the fuse is #34.

Jan 28, 2009 | 1999 Oldsmobile Cutlass

Not finding what you are looking for?
1999 Oldsmobile Cutlass Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...