Question about Toyota Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: engine mounting
I first have to ask if you are sure the engine mounts are bad, or could the engine just be misfiring on a couple cylinders. Is there any clunking or thumping when accelerating or just revving the engine? If there is, then check the motor mounts, otherwise check the sparl plugs and wires. Here is an internet parts supplier that I have used before. http://www.rockauto.com/catalog/raframecatalog.php Most of their merchandise goes out by UPS who has a facility in Gaborone. It looks like your Chariot was sold under many different names throughout the world. We knew them in the US as the Dodge Colt Vista, and the Mitsubishi Expo. Here is a brief bit of information about the car. http://en.wikipedia.org/wiki/Mitsubishi_Chariot
Posted on Mar 30, 2009
205 is the width in mm. 65 is the hight of the sidewall (.65x205=133.25mm)65 percent of the with. 15 is the diamater in inches of the rim (tire hole) for example if you keep the same rims 205 75 15 would be the same width but slightly taller.
215 65 15 is wider and taller as 65% of 215 is 139.75 millimeters. if you go to 16 or 17 inch rims u can get much bigger. the width of the tire must not rub on the insides of the fenders. the hight must not contact the top of fender taking in consideration the suspension. u can look for car clubs of that model and chat with the members.
Posted on Jul 23, 2009
in theory yes but you will need it engineered i.e.. fabrication of engine mounts, power steering pump, alternator, air compressor brackets fabricated, possible cutting the firewall and getting an engineering certificate to state that its not a death trap......you would also need to buy a ecu to match the engine or get an after market computer then have it tuned. which means also replacing the ignition barrel to take a key for that ecu/engine as they have transponder chips in them
then there is the question of making the gearbox fit to the engine or replacing the gearbox with a toyota one that fits the engine. which will mean fabricated gearbox mounts and either fabricated output shaft or propellor shaft
Posted on Apr 15, 2012
Tips for a great answer:
Oct 30, 2013 | 1995 Mitsubishi Mirage
May 18, 2012 | Cars & Trucks
Feb 17, 2012 | Mitsubishi Cars & Trucks
Aug 08, 2011 | Mitsubishi Pickup Cars & Trucks
Apr 25, 2011 | Mitsubishi Colt Cars & Trucks
Jan 27, 2011 | 1997 Mitsubishi Galant
Jun 02, 2010 | 1984 Mitsubishi Starion
Jul 23, 2009 | Mitsubishi Galant Cars & Trucks
Mar 30, 2009 | 1998 Mitsubishi Galant
Mar 27, 2009 | 2003 Mitsubishi Outlander
19 people viewed this question
Usually answered in minutes!