Question about Hyundai Motor 2005 XG350

Open Question

Makes noise squeaking

Just had new brakes and now making squeaking noises when driving slowly. more noticible after it rains .

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10 Answers

SOURCE: 2001 Hyundai Accent new rear brake noise

jack up the rear wheel and spin it, do this with the other wheels chocked for safety, and listen for any rubbing sound, do this with both rear wheels and if one is bad then remove the drum again to check if the retainer has come off of the brake lining, hope this helps you.

Posted on Jan 07, 2009

Ad
  • 366 Answers

SOURCE: noise on 2007 accent hatchback

defective wheel bearing!

Posted on Mar 23, 2009

  • 366 Answers

SOURCE: new starter loud banging noise when u start it

could be! can be cracked,could have damaged drive gear tooth on it! could be starter that became loose also! inspect it asap before damaging new starter or fly wheel!

Posted on Apr 18, 2009

  • 603 Answers

SOURCE: front brake caliper clicking sound

Guessing it's a broken pad.
Why not replace the pads, and fix the problem?

Posted on Jan 05, 2010

iambanshee74
  • 3489 Answers

SOURCE: 2005 hyundai accent is making a chattering sound

quality is definately an issue. there is no reason for them to be worn out or making noise. upgrade your pads from the dealer and have your rotors turned.

Posted on Jan 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Tahoe and recently the SERVICE STABILITY came on the dash board. It makes a real high pitched squealing noise while driving and it's now constantly making the noise. And getting worse. I know...


This stuff is my specialty, sounds like POSSIBLY your abs pump motor failing (the abs module mounts to the abs hydraulic pump where all the brake lines go into) i.e abs module=brain abs pump=muscle to put it simply. get the fault code(s), its going to be something like C0265 or C1214 basically "C" then 4 numbers. I can tell you EXACTLY what your problem is WITHOUT having to throw a bunch of money away by replacing unnecessary parts.
found this:
  • BRAKES - SQUEAK NOISE ON BRAKE PEDAL APPLICATION
TECHNICAL SERVICE BULLETIN
Bulletin No.: 08-05-22-002C
Date: April 07, 2009
Subject:
Squeak Noise On Brake Apply (Remove Brake Fluid from Master Cylinder and Refill)
Condition
Some customers may comment on a squeak noise when the brake pedal is applied or when released. This noise is normally heard when the brake pedal is slowly applied with the engine on or off, but can occur when the brake pedal is released. The noise may be isolated to the master cylinder area.
Correction
To correct this concern, remove as much of the old brake fluid from the master cylinder as possible and refill with a new DOT 3 brake fluid, P/N 88862806 (in Canada, use P/N 88862807). Start the vehicle and fully cycle the brake pedal until the noise diminishes to allow the new fluid to enter the system. hope this helps! -Tim

Jun 06, 2014 | Cars & Trucks

1 Answer

WHEEL SQUEAKS WHEN DRIVING


There is a small metal tab on the brake pad made to make noise
when the brakes are close to worn out,the noise goes away under
braking,I suspect the pads are in need of replacement.Make sure
the rear brakes get checked for proper adjustment at the same time.

Jan 06, 2013 | 2002 Dodge Caravan

1 Answer

When driving or starting the car i notice when using the brakes it makes a squeaking noise - not all the time think its possibly damp causing it as it was raining yesterday and it happened but no rain...


To address your first problem squeaking brakes aka "brake squeal", is most often casued by one or 2 things: "Pad vibration" or a "low brake warning sensor".

Pad vibation is usually caused by ineffective pad anti-rattling clips & hardware that allow the pads to vibrate at a super fast speed whenever the brakes are applied, thus causing a high pitch brake squeal. To correct this, replace all the pad hardware and anti-rattling clips and make sure you use a quality pad set that has anti-rattling plates attached to the backs of them. Weather conditions do affect brake squeal, that is why it seems to be worse at times.

Low brake warning sensor squeal occurs when your brake pads reach the point of replacement, the sensor attached to the pads scrapes on the rotor which produces a high pitch squealing sound to warn you it's time for new pads.

As far as your second problem goes (a knocking sound), I'll need more information about the problem before I can offer a possible cause (eg. happens on left or right turns, while going over bumps, at high or low speeds, accellerating...).

Sep 22, 2011 | 2001 Ford Focus

1 Answer

My 2004 Tahoe is making a squeaking noise in the front dash on the driver's side. It squeaks when we are driving and it gets louder when we hit bumps. It sounds like something rubbing together. when...


check the backing plate to the disc brakes, if its been bent even slightly your gonna hear that same noise,, if it is that < Just bend it back out a little

May 25, 2011 | 2004 Chevrolet Tahoe

4 Answers

Squeaking noise when applying the brakes,have had the brakes serviced and cleaned 6 times, and still have noisy brakes.


its sounds like the shims where not installed on the brake pads like they should of. or the pads are glazed from overheating

Mar 07, 2011 | 2009 Volvo XC90

1 Answer

When bringing car to a stop using the brakes I hear a squeaking noise I drive a 2007 pontiac vibe


Check to see if the brake pads are low. They might be low enough and the squealers may be touching. Which will make a squeaking noise. If they are not low you may have metallic brake pads that will also make a squeaking noise. If this is the case you can try disc brake quiet. This is a spray that you can get at most auto part stores.
I hope this helps!

Jul 23, 2010 | 2007 Pontiac Vibe

1 Answer

Squeaking on 1999 toyota corolla


Throughout my experience with Toyota's I have found that several times the hubcaps have made some weird noises. Try removing your hubcaps and driving your vehicle. If the noise still persists please let me know and I can ask u some questions and try to help you with your problem.

Aug 11, 2009 | GMC Jimmy Cars & Trucks

1 Answer

2005 GMC Canyon 4x4 clicking noise in rear end when in drive. Starts at about 20mph. At first, noticed a squeeking noise when in reverse. that went away.


Stones in tire treads? Pull the rear wheels for a look-see. Inspect brakes and all hardware. Have then lubed. Make sure linings or pads are not glazed to eliminate squeaking noise.Make sure parking brake works properly and smoothly. It may beone or more of those things. Good luck there, pardner.

Jun 10, 2009 | 2005 GMC Canyon

1 Answer

Front brakes make noise when applied after installing new pads.


it could be because they are dirty. also the noise could be the back brakes. if its a squeaking noise it could be that they are dirty or that they are cheep brake pads and for the first couple of weeks they squeak. also when you got your breaks changed did the break shop cut the rotors because that cleans them up and makes the rotors like new.

Apr 28, 2009 | 2003 Suzuki Grand Vitara

1 Answer

Squeaking noise at low speeds


take the front wheels off and look between the brake scratch plate and the rotor. - a stone trapped there will cause this noise. Also between the driveshaft and the hub, where the shaft enters the hub at the back. l
Look too for either a support bracket for a brake line or ABS wiring touching the driveshaft. Also there is an antisqueal spring on the back of the brake calipers someotimes this will touch the outside of the brake rotor, you'll see a shiny mark on the rotor if something is touching. Also the scratch plate on the back of the rotor can touch the inside of the wheel rim, again look for a shiny mark all the way around the inside of the rim. Lastly look at the face of the brake rotor for a circular scratch - indicates a stone stuck in the brake pad. Have fun!

Jan 07, 2009 | 2000 Dodge Neon

Not finding what you are looking for?
Hyundai Motor 2005 XG350 Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...