Question about 1987 Ford Ranger

Open Question

Vacuum hose routing for ford ranger 2.3 liter 1988 model

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 69 Answers

SOURCE: Replace heater core in 1988 Ford Ranger

allow the system to cool down

take radiator cap loose to release pressure

once pressure is released tighten cap

loosen clamps on the heater hoses in the engine compartment on the pass. side of firewall.

plug or cap off the heater core tubes to prevent spillage when you pull it into the truck

place a trash bag on floorboard in case spillage occurs

remove the five screws holding the heatre core access cover, three on top and two on bottom

carefully pull heater core back and down and remove it from the dash

install is reverse

Hope this helps

Posted on Mar 29, 2009

canbruce75
  • 1776 Answers

SOURCE: I need a diagram for where the vacuum hoses go to

Check out the autozone.com website and register the truck there. It doesn't cost anything and will give you access to an online repair manual for the truck. The vacuum diagrams should be available there. Hope this helped and best wishes.

Posted on Aug 30, 2009

  • 87 Answers

SOURCE: need vacuum hose diagram for 2001 ford ranger with

fb904d6.gifhere it is good luck!

Posted on Mar 08, 2010

ZJLimited
  • 17970 Answers

SOURCE: i need vaccuum diagrams for a 1988 ford ranger V6

Fig. 19: Vacuum hose routing-1989 2.3L EFI engines; calibration 9-50K-R00

648d6e7.jpg


Fig. 20: Vacuum hose routing-1989 2.9L EFI engines; calibration 9-65F-R00

662725c.jpg

Hope this help (remember rated this).

Posted on Mar 25, 2010

csmock132
  • 4669 Answers

SOURCE: 2001 ford taurus 3.0 liter ohv serpentine belt

3.0 OHV Vin U24dba77.gif

Posted on Apr 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 ford ranger vacuum hose diagram


1999 Ford Ranger Vacuum hose diagram
Pamela, Normally vacuum line routing can be found under the hood of truck, on Rad support or on the underside of hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Ranger Engine Vacuum Hose Diagrams
Vacuum Lines The Ranger Station Forums
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

Jun 12, 2016 | 1999 Ford Ranger SuperCab

1 Answer

1989 Ford 5.8L vacuum diagram


There should be a decal under the hood with vacuum hose routing.

Mar 06, 2015 | 1988 Ford Ranger

1 Answer

Vacuum hose diagram


I went to Google search and typed in, "1985 ford ranger vacuum line route", came up with lots of schematics

Jun 15, 2014 | 1985 Ford Ranger

1 Answer

Location of vacuum reservor on 1988 ford mustang LX 2.3 liter


0900c1528004e03f.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 191: Calibration 7-21C-R5-8-302 Mustang 1988 California


0900c1528004e040.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 192: Calibration 7-21C-R5-8-302 Mustang 1988

May 05, 2012 | Ford Mustang Cars & Trucks

1 Answer

Vaccum hose diagram for 1987 ford ranger needed


CHeck this diagrams...


2_16_2012_2_02_19_pm.jpg


Fig. 14: Vacuum hose routing-1987 2.9L engine - zoom link here


2_16_2012_2_05_56_pm.jpg

Fig. 13: Vacuum hose routing-1987 2.3L engines - zoom link here

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 16, 2012 | 1987 Ford Ranger

1 Answer

Several vaccum hoses are not attached, I need a diagram for a 1987 ford ranger


Hi John:
I suggest to check this diagrams...


2_16_2012_2_02_19_pm.jpg



Fig. 14: Vacuum hose routing-1987 2.9L engine - zoom link here


2_16_2012_2_05_56_pm.jpg


Fig. 13: Vacuum hose routing-1987 2.3L engines - zoom link here

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 16, 2012 | 1987 Ford Ranger

1 Answer

I need vaccuum diagrams for a 1988 ford ranger V6 2.9 liter


Fig. 19: Vacuum hose routing-1989 2.3L EFI engines; calibration 9-50K-R00

648d6e7.jpg


Fig. 20: Vacuum hose routing-1989 2.9L EFI engines; calibration 9-65F-R00

662725c.jpg

Hope this help (remember rated this).

Mar 24, 2010 | 1988 Ford Ranger

1 Answer

88 ford ranger


1988 Ford Ranger 2WD
2.0 liter SOHC L4

9611fc8.gif
1988 Ford Ranger 2WD
2.3 liter SOHC L4

b2ba47b.gif
1988 Ford Ranger 2WD
2.9 liter V-6

3900f5e.gif
The firing order is the same in the 4wd specs also.

Sep 25, 2008 | 1990 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...