Question about 1999 Isuzu Trooper

Open Question

Isuzu trooper problems

What size are the starter bolts??

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Starter removal - 1994 Isuzu Trooper

pull the starter away from the bellhousing and turn the drive end upwards then it will come out from the engine compartment tight i know but i have just done mine so i know it will come

Posted on Mar 30, 2009

  • 1776 Answers

SOURCE: How to remove the starter in my 93 isuzu trooper?

I can hook you up!! lol Go to the autozone website at and register your vehicle. It's free and you will have access to an online repair manual for your vehicle. The step by step instructions for removing the starter on your vehicle is there. ( I checked). Hope this helped and best wishes.

Posted on Jul 30, 2009

  • 262 Answers

SOURCE: Isuzu Trooper Starter Replacement

2.1 Labor hours for a 4WD Trooper LTD

Posted on Feb 06, 2010

  • 474 Answers

SOURCE: I need to know the

14 mm

Posted on Feb 25, 2011

  • 878 Answers

SOURCE: Replacing the starter in my 1992 isuzu rodeo and

14mm 0r a 15mm

Posted on Mar 08, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

V6. What are the size and length of the starter mounting bolts?

Probably 12mm X 1.5mm. Length is about 1 1/2 inches and 3 1/2 inches. They are metric.

Aug 06, 2015 | 1995 Isuzu Trooper

1 Answer

What size bolt holds the caliper carrier on a 90 isuzu trooper


Mar 09, 2015 | 1990 Isuzu Trooper

1 Answer

What size is the alternator tensioner bolt for a 1996 isuzu trooper and where could I find this bolt?

depend on motor size but any hardcast bolt with lockn nut should work... ace hardware or lowes has a isle of harded cast bolts and nuts

Mar 02, 2015 | 1996 Isuzu Trooper

1 Answer

Starter bolts

same as old (joking)
oh a trooper, those are rare here.

if you lost them ,
i measure the hole, in the starter, 8.5mm? a wild guess.

could be 10 or 12mm and is easy as heck to measure, that.

Id have gone to the store and got (my measured size)
both pitch sizes, in 8mm(guess) , and tried them. 1 will fit.

if you have the nuts still (you never said)
then use a pitch guage. $1 tool.
then the diameter ,yes, use a $1 mm rule. and read it.
now you have pitch and diameter, that leaves lenght
and id bet you can do that easy now. (the ruler)

Oct 20, 2013 | 1999 Isuzu Trooper

2 Answers

How to remove the starter from a 1993 isuzu trooper with a 3.2L engine,auto tans and 4wd.?

follow your positive cable from battery ,the starter is at the other end its held to motor by two bolts i believe is a14mm or 15 mm

Dec 09, 2010 | 1993 Isuzu Trooper

2 Answers

Locate the starter on my 1991 isuzu trooper v6

the starter is located at the bottom rear of the engine, u access it from under the truck.

Apr 13, 2010 | 1991 Isuzu Trooper

1 Answer

Replacement of starter on 1994 isuzu trooper

Remove the positive battery cable first.
The starter is on the passenger side of the engine. Might be easier to get to from below. Remove the bolts holding the wiring to it than the bolts that mount the starter in place.
Be careful if it has shims that you make sure you put them back in the same way. (These are little thin spacers that go between the mounting surface and the starter).
Installation is reverse. Probably would take you no more than 30 minutes to do it all.

Oct 17, 2009 | 1994 Isuzu Trooper

1 Answer

How do you remove the starter from a 1994 Isuzu Trooper?

Unscrew and disconect the wires. Unscrew and remove the 2-17mm bolt's. Their is a small stud which holds the starter in place leave it to last unscrew it and thats it.

Aug 13, 2009 | 1994 Isuzu Trooper

Not finding what you are looking for?
1999 Isuzu Trooper Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides