Question about 1996 Ford Mustang

Open Question

Actuator only blows air to windshield

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am not getting air to the windshield


Make sure the mode door actuator is moving when you press the defrost button. The mode door actuator should be under dash just right of the steering column. If it doesn't move or click then the control head may be bad, if it clicks or tries to move the actuator is bad or the mode door could be stuck.

Nov 04, 2014 | 1995 Honda Accord

2 Answers

Why won't defrost on dash blow out on the windshielf


Time to get behind the dash, to check ducking and actuator's door and motor, I think you have a clogged duck or actuator door or motor that need to be repair or replace.

Oct 13, 2014 | 2002 Dodge Grand Caravan

1 Answer

Air blend door actuator


Possible bad blend door actuator .some gm cars can be relearned to the new climate control head

Jul 28, 2013 | 2001 Oldsmobile Aurora

1 Answer

Have a 93 sierra,cannot get air to defroster,can hear fan but will not blow on windshield ?


Can you hear your blend door at all. Does it change into other settings. Like to floor and vents. It could be your blend door actuator.

Jan 05, 2013 | 1993 GMC Sierra K1500

1 Answer

When I turn on the ac or the heater on my 1992 pontiac bonneville ssei supercharged it will now air to the windshield but when I change it to blow to me or my feet it won't blow any air. what coul


there is a paddle inside the sysem which moves to change the direction of the heat, i could be jammed or its actuator is broken or not getting pwer. if not it could be your switch is not working so the sigal to change position is not be received. first check all fuses are ok.

I hope this was useful.

Sep 02, 2012 | Cars & Trucks

2 Answers

When I turn my air conditioner on, the air blows out on the dashboard for the windshield and not from the vents. What can I do??


The blend door actuated by solenoids may not be working correctly causing a/c cool air to come out of the windshield vents, rather than the regular front vents.

Defroster Valve Actuator 1996 – 1999 1996 – 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the air distributor assembly.
  2. Unclip the defroster valve actuator from the air inlet.
  3. Disconnect the defroster valve actuator from the valve.
To Install:
  1. Disconnect the defroster valve actuator from the valve.
  2. Clip the defroster valve actuator from the air inlet.
  3. Install the air distributor assembly.
Heater/Bi-Level Actuator 1996 – 1999 1996 – 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the air distributor assembly.
  2. Remove the clip and the screws that fasten the 2 halves of the air distributor assembly and separate the air distributor assembly.
  3. Unclip and disconnect the heater/bi-level actuator from the valve.
To Install:
  1. Connect and clip the heater/bi-level actuator to the valve.
  2. Fasten the 2 halves of the air distributor assembly together and torque the fasteners to 13 in-lbs (1.5 Nm).
  3. Install the air distributor assembly.
---
Removal & Installation Recirculation Actuator 1996 – 1999 1996 – 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the left sound insulator panel.
  2. Disconnect the vacuum hose from the recirculation actuator.
  3. Remove the recirculation actuator from the valve.
To Install:
  1. Connect the recirculation actuator to the valve.
  2. Clip the recirculation actuator to the air inlet.
  3. Connect the vacuum hose to the recirculation actuator.
  4. Install the left sound insulator panel.

Aug 13, 2010 | 1997 Buick LeSabre

1 Answer

I have a 2007 Endeavor with the following problem: Air does not blow out of the front defogger to defog the windshield. You hear it blowing, but it is not coming out. I have switched the knob to change the...


The air flow is controlled by an actuator behind the dash. The part is sometimes called the heater control box. When you are selecting the air flow to change from the a/c controller. The signal is not being received to the actuator. The actuator is called the blend door.
You need to have the air /blend door actuator change. I think in this car is the air recirculation door. Same thing different name .

Good luck

Oct 31, 2009 | 2004 Mitsubishi Endeavor

1 Answer

1999 Buick LeSabre - A/C blows only on windshield


Inside the heater box (under the dashboard) there are actuators that are similar to the ones that open your power door locks, they do go bad especially if any water leaks in from a bad heater core or windshield leak.(down the defrost vent grate). Also old age, my truck is a 2000 and I have replaced a couple of actuators.

Sep 03, 2009 | 1999 Buick LeSabre

2 Answers

Air only blows hot on 96 lincoln


Sounds like the heater and a/c blend door actuator. It is located under front center of dash below windshield. Dash must be removed to replace it. I've done it several times.

Jun 18, 2009 | 1996 Lincoln Town Car

Not finding what you are looking for?
1996 Ford Mustang Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...