Question about 2005 Toyota LandCruiser Prado

Open Question

Remove spare wheel cover from toyota landcruiser

Have a spare wheel on rear door of landcruiser want to remove the chrome outer ring cover.there seems to be a catch which does not move. can u help please

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 99 Answers

SOURCE: Remove rear plastic bumper cover

please email me at meanness628@aim.com with any other info or questions if you have already gone to a body shop

Posted on Sep 29, 2008

danny_murray
  • 55 Answers

SOURCE: toyota landcruiser ignition switch

I am not 100% sure on toyota but most ignition switches you must remove the housing around the steering wheel to get to it . Its usually a large plastic componet on the left side behind the turn signal handle . It is always best to go to the local auto parts store and buy a haynes repair manual before attempting any repairs. Hope evereything turns out well for you !!

Posted on Dec 09, 2008

  • 1 Answer

SOURCE: water pump on a toyota landcruiser 4.2 ltr diesel

Hi Scott_har892
In shortr yes,
If it's getting close to a timing belt change and or the water pump is about to fail do them both at the same time with the radiator removed (just makes it so much easier) while your are at it do the timing cover seals as well

Posted on Jan 06, 2009

  • 35 Answers

SOURCE: wheel alingment specs for toyota land cruiser

Camber
Left−right error
1°00’ ± 45'

Caster
Left−right error
3°00’ ± 1°

Steering axis inclination 13°00’ ± 45’
Camber, caster and steering axis inclination are not adjustable.
If measurements are not within the specification, inspect the
suspension parts for damaged and/or worn out parts and replace
them as necessary.


INSPECT TOE−IN
Toe−in
(0.08 ± 0.08 in.


This is the only Land Cruiser Specs I could find, hope it helps

Posted on Apr 18, 2009

  • 191 Answers

SOURCE: Repair manual for 1995 toyota landcruiser 1-HDT 24 valve

Try this link -- http://www.auto-repair-manuals.com/1990-2007-Toyota-Landcruiser-Diesel-Engine-including-Turbo-Auto-Repair-Manual.html

Posted on Apr 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Doorhandle


for passenger side:
1. unclip screw cover 'center flap' of inside door opener plastic cover, flap is 3/8"x 3/8" (center of plastic cover)
2. remove phillips screw now showing
3. push fabric panel (edge of door opener plastic cover-at hinged end of chrome handle) to allow uncliping of edge of plastic cover (top rt & lwr rt (for passenger side) of plastic cover)
4. open chrome inside door handle to allow plastic cover to be removed-slide plastic cover toward rear, free end of door to remove cover
5. remove switch panel-gently pry with wide non maring pry bar (cover wide blade screwdriver using cloth) do rear of sw panel 1st (don't pry front edge)
6. slide switch panel toward rear to allow removal
7. remove large phillips screw under sw panel
8. remove the 2 plastic covers near top, hinge edge -use plastic spoon handles to encourage caps to pop off. May also require small screwdriver approx 1/8" in to complete pop off
9. remove the 2 phillips screws w/ captive washers
10. remove 3 phillips/hex screws along the bottom inside of door panel
11. on outside/rear edge of panel push the 2 center pins of each in about 1/8"-this allows the clip to be pulled out w/ pin pushed in
12. remove plastic cover (REAR OF SIDE MIRROR)-pull window edge up and back.
13. lift rear of door panel (not hinge edge) up allow hinge edge to pivot around lower pin in door (hinge edge)
14. remove the 2 rt edge "L" brackets (gently pry center plastic pin out) (note the color and replace as removed)
15. slowly peel the clear plastc away from the non hinged end to expose the plastic panel with 3 phillips head screws
16. remove the 3 screws and panel for access to door handle.
17. using access area now available unlatch the rod attached to exterior door handle (unclip plastic to rotate clip up to allow rod to slide out-toward hinged edge)
18. using access area now available remove rod from ext door handle from inside door area
19. remove the 3 -10mm head bolts
20. remove the ext door handle (bottom edge out first)
reverse order to replace door handle

Mar 24, 2014 | 2003 Toyota Avalon

1 Answer

Outer race of wheel bearing is stuck in knuckle. How do I remove?


You can hammer it out, or use a hydraulic press

Mar 26, 2013 | 1997 Toyota RAV4

1 Answer

I need to remove the door panels to change the side mirrors on Landcruiser Station wagon 200 series


When you open the door, you will see a small cover that covers the mirror inside, remove the cover then use screw driver to loose the screws and remove the mirror and replace it.

Aug 20, 2011 | Toyota Land Cruiser Cars & Trucks

2 Answers

Where is the spare on the 1997 Blazer


Welcome to FIxYa.com


rear of truck under neath frame


Regards, Lee Davidian


Thank you for using FixYa,com.

Oct 23, 2010 | 1997 Chevrolet Blazer

1 Answer

How do i release the spare tire under the truck


there is usually a nut inside the rear door, that will lower the spare wheel frame, carpet or mat may be covering it

Aug 13, 2010 | 1994 Toyota Land Cruiser

1 Answer

Cannot remove front rotor. Caliper and pads


Raise vehicle and remove wheels. Disconnect brakeli
ne from caliper (if necessary). Remove caliper.

On models with free wheeling hub, set control handl
e to FREE position. On all models, remove hub
cover, bolt/washer and hub body. Use tapered punch
to open slits of conical washers. Remove axle shaft

snap ring (if equipped).

Straighten tabs of outer lock washer. Using Spindle
Socket (09607-60020), remove lock nut, lock washer

and adjusting nut. Remove thrust washer and outer b
earing. Remove axle hub and rotor. Remove grease se
al
and inner bearing. Press hub bolts out of axle hub.
Remove retaining bolts, and separate rotor from hu
b.

Mar 20, 2010 | 1996 Toyota Land Cruiser

2 Answers

I inherited a G20 gladiator chevy van and cannot figure out how to get the spare tire cover off the back door??? It sounds stupid, I know.


Most likely Gladiator conversion vans disappeared like many of the other conversion van companies. I am not familiar with Gladiator vans, but most of the conversion vans use the same setup. The chrome ring around tire is latched near the bottom, and usually padlocked to keep others from stealing your spare. If that is not the case, try http://www.v-sales.com/repair.htm . They still sell conversion parts and may be able to help you. Hope this helps

Sep 29, 2009 | 1993 Chevrolet G20

2 Answers

Starter location on 1999 Toyota Landcruiser


jack up the truck , remove the right front tire than remove the small little panel at the top left of the inner wheel whell. just above and to the rear of the shock mount. it should be mounted on the right lower side of the motor with 3 hard to get at bolts.

Mar 29, 2009 | 1999 Toyota Land Cruiser

2 Answers

Rear diff leaking on my toyota landcruiser 75 series trayback


you should have abut 8 or 10 bolts around the rear diff., take those bolts out, remove diff. cover and replace the diff. gasket.. this will fix your problem...

Mar 19, 2009 | 1991 Toyota Land Cruiser

1 Answer

Door trim


Inner or outer? INNER, means removing the cover plates from the switches - they pull off carefully. You can then unscrew the housings. The armrest is secured by 2 screws, it is a little tricky to reach up inside the handle with an 11/16 spanner from below, they do not have to come out completely just enough to pull the armrest up over them.. OUTER, the chrome trim is held at the rear end with nuts the centre ones are pull off and the front one can then be slid out.

May 15, 2008 | Rolls Royce Camargue Cars & Trucks

Not finding what you are looking for?
2005 Toyota LandCruiser Prado Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...