Question about Cars & Trucks

Open Question

How to change oil pan gasket on a 2006 dodge ram 1500 4 by 4

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 160 Answers

SOURCE: RATTLING NOISE AT OIL PAN AREA ON 1998 DODGE RAM 1500 5.9 LITER

rod bearing , engine needs rebuilt

Posted on Nov 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil gaskets on 2006 dodge stratus


there is a trans pan gasket is the fluid leak redish in color? and there is a solenoid pack gasket just above the trans pan

Aug 13, 2012 | 2006 Dodge Stratus

1 Answer

The 5.7 hemi 2006 dodge ram 1500 losing coolant tekućinu.U hole oil emulsion is created and drops of antifreeze. At the bar there is no oil emulsion oil is clean.


II got a dodge 1500 4.7. The problem is, the oil cab is all green and im losing coolant all the time, there's smoke coming out smells bad, but no check engine at all. So I took it to a shop to check it they said, it's a water pump ,I changed the water pump but still losing coolant ............ so is it head gasket, manifold gasket, valve stem seal, piston rings, or something I don't know of??

Feb 04, 2011 | 2006 Dodge Ram 1500

1 Answer

Changed water pump in 06 dodge 1500, 4.7 v8. Everything checks out except noe my engine overheats, not getting any flow either. could it be the thermostat?


it could be thermostat or it could be a blown head or valve gasket does your oil look like coffee with cream?

Nov 18, 2010 | 2006 Dodge Ram 1500

1 Answer

On 1994 dodge 1500 4x4 to change oil pan do i have to raise the engine


  1. Disconnect the negative cable from the battery.
  2. Remove engine oil dipstick.
  3. Raise vehicle.
  4. Drain engine oil.
  5. Remove exhaust
  6. Remove left engine to transmission strut.
  7. Loosen the right side engine support bracket cushion thru-bolt nut and raise the engine slightly. Remove oil pan by sliding backward and out.
  8. Remove the one-piece gasket.

Oct 15, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

How to change the oil on a 2004 dodge ram 1500


Go under the car and locate the oil pan directly beneath the engine and use a wrench to remove the drain bolt after placing a container under it. If you need to change the oil filter, that is also accessed from underneath, and you will need an appropriate sized oil filter wrench to remove it. (It is not always necessary, although desirable, to change the filter with every oil change.)

Replace the filter by dipping your finger into fresh oil and coating the rubber gasket then simply screw it on and tighten it 3/4 turn beyond hand-tight using the filter wrench. Replace the drain plug and pour in the amount and type of oil specified in your owner's manual. Run engine a few minutes and check for leaks at the filter.

Sep 05, 2010 | 2004 Dodge Ram 1500

1 Answer

I have a 1997 Dodge Ram 1500 4x4 club cab with the 360 Magnum engine. Under stress of pulling a trailer the engine nozzle lags and uses oil. I have been told that the gasket on the throttle body needs to...


I do know these are good for sucking in the gasket for the pan on the bottom of the intake and causing spark knock and oil consumption but not a throttle body gasket.

Mar 26, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Oil Pan Gasket


the oil pump is in the oil pan attached to the block. there for you have to raise the engine so you can see the oil pump and get the gasket under it to get it to slide into place. my suggestion is to raise the engine and replace the gasket

Feb 02, 2009 | 2000 Dodge Ram 1500 Truck

1 Answer

Smoking Ram


On the intake there is a pan the gasket usually hardens and pieces break off allowing oil from block to be sucked into intake (I am assuming you have performed compression check on all cylinders and thier OK) You have to pull the intake to get to this pan.

Jan 20, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...