Question about 2003 Honda Civic

1 Answer

Reset maintenance light - 2003 Honda Civic

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 37 Answers

There are 2 way to reset the maintenance light on Civic.
1. Manually reset
To reset this maintenance light, you will put the key in the ignition. Next you will press and hold the odometer reset knob, which can be found on the dash where the car's current mileage is located. While you continue holding that know, you will turn the key to the first position but do not start the engine. After about 10 seconds, the maintenance light should disappear. If the light is still on, you can turn off the vehicle and then try the process again. Once the light is off, you are all set until your next schedule maintenance.

2. Hook up a HDS (Honda Diagnostic System) software on a laptop, the light will go off within minutes.

http://www.obd365.com/wholesale/honda-hds-him-diagnostic-tool-with-double-board.html

Posted on Dec 09, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

Tip

Civic, Prelude, and Acura (Honda) Integra maintenance light reset.


On the typical Honda gauge layout, there is a small, rectangular, recessed button directly to the left of the "Maintenance Required" light. Using a key, you can press this button in, With the key off, hold down the trip meter reset button. turn the key on and continue holding the reset button in until the maintenance light goes off, about 10 seconds. which will cause the light to turn green. The maintenance light (at least on Civic) will come on about every 4000 miles if not reset (for oil changes), and also periodically for other scheduled maintenance.

on Dec 07, 2009 | Honda Civic Cars & Trucks

1 Answer

Light maintenance required


it tells you maintenance schedule is due and once it is done you have to reset it. resetting instruction can be found in your owners manual, or go online how to reset.

Dec 12, 2013 | Cars & Trucks

1 Answer

What does the yellow wrench light indicate on a 2008 dodge caravan. THANK YOU!


a yellow light indicates maintenance interval has passed whether it b oil change maintenance or egr maintenance,(exhaust gas recirculation valve) can b reset as per ur owners manual.theirs specific instruction in ther on how to reset ur light. maintenance is recommended though,not a good idea to reset an keep driving w/o required maintenance.. hope this helps

May 01, 2011 | 2008 Dodge Grand Caravan

2 Answers

How to reset service light on 2007 Acura MDX


The full procedure how to reset oil service light Acura MDX. After an oil change, if you like to reset any maintenance oil light for Acura cars. Or any error which appears on the display.
http://resetservicelight.com/reset-oil-service-light-acura-mdx/

Oct 14, 2010 | 2007 Acura MDX

2 Answers

How do i turn of the timing belt light on my 04 landcruiser 3 litre


Ive never heard of a timing belt light, but there is a maintenance light that can be reset. Here the procedure:

To reset the maintenance reminder light: Turn the ignition switch to the "ON" position. Set the odometer/trip display to the odometer (ODO) mode. Turn the ignition switch off. Depress and hold the trip meter reset button while turning the ignition switch to the on position. The maintenance reminder light will, illuminate for 3 seconds, blink for 2 seconds, illuminate solid for 1 second and then turn off. Release the trip meter reset button. Turn the ignition switch to the off position. Turn the ignition switch to the on position. Confirm that the maintenance light goes out.
Let me know if this helped you out!

Mar 29, 2010 | 2004 Toyota Land Cruiser

1 Answer

I changed oil in my honda civic 2008 but i don't know how to reset maintenance light


You use the button that resets your trip odometer to reset the maintenance light.

with the key in the ignition but not turned on, hold the trip reset button in with one hand. then, while holding the button in, turn the ignition key to the ON position so that the lights on the dash come on.

Continue to hold the reset button in and watch the maintenance light. it will take about 15 seconds for the light to go out

When the light goes out, turn the ignition key OFF and then release the trip reset button.

Your light will be reset and come on in about another 5000 miles to remind you of the next service

Hope that helps

Nov 30, 2009 | Honda Civic Coupe

4 Answers

Reset maintenance light


If I remember correctly, on the dash you have a select button. Hold the button down then turn the key on, until the maintenance light blinks and goes out. Turn the key off then back on and your light should be out.

May 28, 2009 | 2005 Honda Civic

1 Answer

Resetting maintenance light


to reset light turn key on hit gas pedal 3 times really fast that will reset it.

Oct 19, 2008 | 2004 Chevrolet Cavalier

1 Answer

Perform Maintenance Light


a lot of places don't know how to reset the light, all you have to do is step your attentions until you get to maintenance and hold the reset button down it will reset it,

Oct 04, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Honda Civic Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...