Question about 1994 Buick LeSabre

1 Answer

1994 Buick Lesabre A/C Clutch

I just replaced the a/c clutch, pulley and magnet of a 1994 buick lesabre and the compressor does not kick on. I do not know how tied the a/c clutch has to be?

Posted by on

  • Orlando Martinez
    Orlando Martinez Jun 19, 2009

    "1994 lesabre a/c clutch". How do you set the air gap?

  • Marvin
    Marvin May 11, 2010

    what is the air gap set at?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 400 Answers

0.026" air gap

Posted on Jun 19, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 buick lesabre custom

Depends on what kind of noise and where its coming from.
Could be a problem inside the compressor, or the ac clutch, or something else.
Did you get a warranty with the compressor ?

Jul 06, 2013 | 2000 Buick LeSabre

1 Answer

2000 buick lesabre ac compressor smoking/not working

either way i wd. replace the assembly! ck. alll the idelers and tentioner pulleyys

Jun 06, 2012 | 2000 Buick LeSabre

1 Answer

The serpentine belt on my 1984 Buick Lesabre keeps breaking when turn on air conditioner or heater why?

Most likely you have a seized AC compressor. When you ask for AC or heat the AC clutch engages with the pulley wheel that normally spins freely when the AC is off. As the pulley wheel is no longer able to turn because of the seized compressor the belt will either slip or snap.

Sep 20, 2011 | 1984 Buick LeSabre

1 Answer

I am trying to locate the relay switch for a 1994 buicl lesabre. the panel is not labeled. the switch is for the air conditioner clutch. all other fuses are ok

Hello: Under the hood at the back there is a cover, remove it. There are relays. I think the A/C clutch relay is the first one toward the passenger side. It should have 4 wires, black, orange, solid green, and green with a white stripe. The relay is controlled by the engine computer. Provide a ground to the black wire and see if the compressor clutch works.

Jun 10, 2011 | 1994 Buick LeSabre

1 Answer

A simple way to fix a rattling air compressor clutch??

Try spraying wd-40 or other lubricant between pulley and clutch. Be carefull not to get too much on belts.

Oct 20, 2010 | 2000 Buick LeSabre

1 Answer

Air conditioning compresser on a 1990 buick lesabre

Yes, you'll need the proper A/C clutch removal tool. The clutch doesn't seal the compressor.

Apr 27, 2010 | 1990 Buick LeSabre

2 Answers

Serpintine belt for a 94 buick lesabre

get an a/c compressor bypass pulley from auto zone

Feb 04, 2010 | 1994 Buick LeSabre

2 Answers

AC clutch is grinding how do i fix? 1997 buick lesabre

Remove the clutch with a clutch removal tool after removing nut. The pulley for the belt does not need to be removed. The clutch needs to be shimmed with some small thin shims or shim that look like washers to space it out from the pulley. You will not lose freon doing this.

Dec 07, 2009 | 1997 Buick LeSabre

1 Answer

Remove clutch for ac compressor

I just removed the a/c clutch on my 1994 lesabre with a puller tool that I bought from RJ tools through EBAY for $23

Jun 13, 2009 | 1994 Buick LeSabre

1 Answer

I need to replace the bearing on the air conditioner compressor.The bearing on the pulley.

You will need to replace the clutch assembly on the compressor. This is not an easy job for a novice but if you have some experience you should be able to do it. You may be able to rent the puller and the installer form your local auto parts store where you but the clutch.

Jun 11, 2009 | 1995 Buick LeSabre

Not finding what you are looking for?
1994 Buick LeSabre Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides