Question about 2006 Dodge Charger

1 Answer

Car wont start

Everything comes on but car won't start horn doesn't work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 752 Answers

Hi Martha, I'm glad to help! There are 2 senarios when someone says a car want start. (1) The engine is turning over but it won't start and run. (2) You turn the key to the runs position and everything comes on but it does nothing, example the engine will not turn over. The first senario: You'll need to check fuel pressure to see if there is any. Pressure should be around 50 PSI. NEXT: you'll need to check for spark because you need to know if it is firing when you turn the engine over. This will narrow the problem down to either fuel or ignition. If one of these turns out bad, then further diagnosis will need to be done to find out what the problem is. (2) The second senario: If you turn the key to the run position and nothing happens. This could be a blown fuse, a run start relay, a starter, or WIN Module. Martha, working on these vehicles everyday, here is what I've found the most. The start run relay goes bad on these vehicles a lot. It's under the hood in the relay / fuse BOX. You can swap the relay with another one that looks the same and see if it starts. CAUTION: Do Not sway the relay with the Auto-Shut-Down relay are you'll have the same problem. If that doesn't work, here's something else you can try. Have someone tap the starter with a small hammer while you hold the key all the way to the run position like your trying to start the engine. If they hit the starter and it starts, then replace the starter. Here's something else you can try. If it is the WIN Module ( Ignition Switch) you can unhook the negative battery cable for 20 seconds then reconnect it and see if it starts, If it starts You'll need the repair shop to repalce the WIN Module because it will need to be programmed and the keys programmed to the WIN. Hope this helps and have an awesome day Martha.

Posted on Jun 17, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 Chevy Tracker won't start. went the ought big


Sounds like you have water in some of your distributuin boxes. Remove the covers and blow them out with compressed air.

Jun 17, 2013 | Cars & Trucks

1 Answer

Srs light on, horn and cruise won't work


Well it would be helpfull to see what codes are stored in the airbag computer, but its interesting that the horn and cruise arn't working. Maybe before spending the money on having the codes scanned, i would check all the fuses, just incase.

Jun 11, 2013 | 1994 Honda Accord

1 Answer

2003 Lincoln ls v-8 cruise control won't engage. Light won't come on or anything when I hit the button. Everything else work fine.


My 2001 Lincoln ls cruise control will not work. Put in a new clockspring and that did not fix it. radio controls and horn work but the air bag light stays on continually after starting. The lights on the cruise side will go on an off -I have bought that part to replace but don't want to put on if that is not the problem.

Sep 12, 2012 | 2003 Lincoln LS

1 Answer

2001 buick regal won't start


call an expert - electrician- to check whether your immobilizer has been activated and wont get off.

Aug 16, 2012 | Cars & Trucks

1 Answer

My plymouth breeze won't start, won't make a sound, but my lights and horn still works , help me.


any real answer yet? did the problem ever get resolved? i have the same problem with my sister's car. too cold to diagnose tonight, but will post the solution probably tomorrow. since the lights and heater works, but ignition and radio arent getting power, my first guess is there's probably a fried fusible link which controls the 2nd accessory power to the ignition switch. will post a solution soon.

Jul 17, 2012 | 1999 Plymouth Breeze

1 Answer

Can it be a fuse why the car won't start


Have you tried replacing earthing cable

Apr 18, 2012 | 1997 Buick Regal

3 Answers

Horn wont work.i check the fuse in the door and


Maybe horn became unplugged. Put 12 v power to horn make sure horn works. Put test light on terminal on horn have someone press the horn button, if light comes on and horn does not blow you may need new horn. if light does not come on you may have bad contact at horn button, blown fuse, broken wire, bad horn relay or possibly just a bad ground.

Jun 22, 2009 | Chevrolet Blazer Cars & Trucks

2 Answers

Chevy blazer wont start 2002


if it turns over there are a cocuple of things to check. crankshaft sensor and the coil pack maybe the computer.id start with the crankshaft sensor

Jun 29, 2008 | 2002 Chevrolet Blazer

Not finding what you are looking for?
2006 Dodge Charger Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...