Question about Cars & Trucks

Open Question

Is the recent fb posts regarding the Jews being targeted in Ukraine valid?

Leaflet handed to Jews exiting synogogues from Passover services told to register and pay a fee citing all their property and vehicles or risk confiscation of same

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does this code mean


Its 5A6..... You have enter the oven into sabbath mode when try to set the clock. To exit sabbath mode press and hold the clock button for 10-15 seconds. When you set the clock yous press the clock button but dont hold it in.

Dec 09, 2015 | Cars & Trucks

1 Answer

Why wasn't I informed of recall?


to be informed of a recall you would have to be the primary owner of the vehicle with a valid address for contact.
If you have bought the vehicle 2nd hand there would have been recalls in the media informing you of the recalls .
if you were getting the services at a service dealer then they would have told you about the recall and by law should have carried them out.

Feb 21, 2015 | Cars & Trucks

1 Answer

Why car won't start after the gear box was taken down to replace the seal which was leaking


Hi Henry, Without knowing the make and year of the vehicle I'm shooting in the dark, but maybe on target? On recent vehicles, even back as far as the mid nineties there are a number of electrical and electronic management connections to the gear box. it could be you're dealing with a bad connection or damaged circuit. Check the area where the recent work was carried out. Regards John

Nov 11, 2014 | Cars & Trucks

1 Answer

05 caravan is it a p4044 code


the code p 4044 refers to exhaust gas recirculation range /performance--reading above or below the specified range
could be a problem valve or solenoid or wiring
the remark about the cat converter is valid as it indicates that when under load the cat converter is blocking the exhaust
this occurs when the honeycomb internals cracks and the bits block the exhaust exit under high gas flows ( from your use description)
you can get replacement cat converters that use flange fittings and they are therefore cheaper when needing replacing
cat converters crack when running hot and are then immersed in extreme cold ( snow , running ice water)when driving

Jun 01, 2017 | Dodge Grand Caravan Cars & Trucks

2 Answers

Toyoto Yaris air conditioning fixed but not working after 1 week


how long u have the car after dealer service the aircon?if more than a week and still have airconed right now your ok,,but after the dealer srvice and run out cold in week again ,,means you got a leak,send the car asap to the dealer to fix the leak if still under warranty,i hope just empty container.not a leak,good luck keep posted.

Jun 04, 2009 | Toyota Yaris Cars & Trucks

1 Answer

I need to know the torque settings for 850cc reliant robin


go to
http://mankymonkeymotors.co.uk/Trikespageimages/relianttorquesettings.html

a target="_new" href="http://www.leafletflyers.co.uk/">Leaflet Distribution in Croydon</a>, Leaflet Distribution in Balham, <a target="_new" href="http://leafletflyers.co.uk/Leaflet-Distribution-Streatham.htm">Leaflet Distribution Streatham</a>.

Nov 14, 2008 | Ford F Cars & Trucks

3 Answers

Remote keyless entry


“CUSTOMER LEARN” MODE This feature is only available on domestic vehicles or those which have a U.S. country code designator. This procedure requires access to at least two valid Sentry Keys. If two valid Sentry Keys are not available, Sentry Key programming will require the use of a scan tool.
The steps required to program Sentry Keys with two valid Sentry Keys follows:
1. Obtain the blank Sentry Key(s) that need to be programmed. Cut the keys to match the ignition lock cylinder mechanical key codes. 2. Insert one of the two valid Sentry Keys into the ignition switch and turn the ignition switch to the ON position. 3. After the ignition switch has been in the ON position for longer than three seconds, but no more than fifteen seconds, cycle the ignition switch back to the OFF position. Replace the first valid Sentry Key in the ignition lock cylinder with the second valid Sentry Key and turn the ignition switch back to the ON position. The second valid Sentry Key must be inserted within 15 seconds of removing the first valid Sentry key. 4. About ten seconds after the completion of Step #3 , the indicator light will start to flash and a single audible chime tone will sound to indicate that the system has entered the "Customer Learn" programming mode. 5. Within sixty seconds of entering the "Customer Learn" programming mode, turn the ignition switch to the OFF position, replace the valid Sentry Key with a blank Sentry Key transponder, and turn the ignition switch back to the ON position. 6. About ten seconds after the completion of Step #5 , a single audible chime tone will sound and the indicator light will stop flashing and stay on solid for three seconds and then turn off to indicate that the blank Sentry Key has been successfully programmed. The SKREES will immediately exit the "Customer Learn" programming mode and the vehicle may be started using the newly programmed Sentry Key.

NOTE: The Remote Keyless Entry (RKE) Transmitter will also be programmed during this procedure. These steps must be completed in their entirety for each additional Sentry Key to be programmed. If any of the above steps are not completed in the given sequence, or within the allotted time, the SKREES will exit the "Customer Learn" programming mode and the programming will be unsuccessful. The SKREES will also automatically exit the "Customer Learn" programming mode if:
  1. It sees a non-blank Sentry Key when it should see a blank.
  2. If it has already programmed four (4) valid Sentry Keys.
  3. If the ignition switch is turned to the OFF position for more than about fifty (50) seconds.

NOTE: If you attempt to start the vehicle while in “Customer Learn” mode (LED flashing), the vehicle will behave as though an invalid key is being used (i.e. the engine will stall after two (2) seconds of running). No faults will be logged.
NOTE: Once a Sentry Key has been programmed to a particular vehicle, it cannot be used on any other vehicle.

Jul 16, 2008 | 2007 Dodge Caravan SXT Minivan New Cars

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...