Question about 2001 Mitsubishi Galant

1 Answer

Engine removal I need to know how to remove the engine to get to the flywheel

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 322 Answers

Why do you need to get to the flywheel? removing an engine is a major ordeal and is not for a novice mechanic. the steps to do so are many and if you are serious about doing it I suggest buying a repair manual for your vehicle.

Posted on Apr 18, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Flywheel replacing


you will need a replica flywheel and new bolts plus torque range and manfacturers specs.

Nov 07, 2016 | Cars & Trucks

1 Answer

What's involved in removing the flywheel from 2005 sebring


Dan, Transmission has to be removed to gain access to the flywheel. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Replace an Engine Flywheel DoItYourself com
Automatic Transmission RemovalDo it Yourself Guide for Rear Wheel Drive...
Dodge Automatic Transmission Removal

May 09, 2016 | Cars & Trucks

2 Answers

How to take the flywheel off with the engine still in


You will need to remove the transmission or transaxle first and then you can remove the flywheel. You do not state model of car so I cannot give more detailed answer than that

Dec 18, 2015 | Cars & Trucks

1 Answer

How to remove a tranmisson on a 2001 dodge carvan ?


if you don't know what your doing it will take you and a couple of your buddies to get it done you will need jacks and jack stands remove both wheels remove both tie rod ends remove the bolts fro the bottom of the struts remove if you have a trans oil pan plug to remove trans fluid remove all electrical and trans cable go under car near trans and engine look up remove the access panel to access the flywheel and torque convertor take the bolts off separating the torque from the flywheel remove the trans bolts separating the trans from engine when installing make sure the torque is seated in the trans really good spin the torque a couple of times until you hear a it fall into place begin reinsatalling in reverse order until the last screw is in place

Sep 25, 2012 | 2001 Dodge Caravan

1 Answer

Remove a flywheel


The clutch come out with the engine since it is bolted to the fly wheel. If you had an automatic transmission then you would need to remove the torque converter bolts from the flywheel so that the torque converter would stay in the transmission. If you pulled the manual transmission the clutch would stay attached to the flywheel. It's the same when pulling the engine.

Aug 07, 2012 | Saturn Vue Cars & Trucks

3 Answers

How do you remove the flywheel


Removing a flywheel can be a aggravating process if you do not know the tricks. The nut which holds the flywheel is on very tightly, and can only be removed by blocking the rotation of the crank shaft with a wrench holding the nut on the blade or by blocking the rotation of the blade. Do not try to hold the flywheel by sticking a crowbar in the teeth, or they might break off. Once you have remove the nut which holds the flywheel in place you will need to gently pry off the flywheel with a crowbar. Keep rotating the flywheel until it can be lifted off easily. Now put the flywheel key somewhere safe. When you want to put the flywheel back on make sure that the key is in the right direction. It is usually marked in some way. :)

Nov 29, 2011 | Cars & Trucks

1 Answer

I need to know if i remove flywheel or ac compressor to remove oil pan


procedure is pasted below. Yes, you have to take the compressor loose if you have the 2.4 liter engine. You should never have to remove the flywheel to get the pan off, but you do have to pull the cover off the flywheel. Please let me know if you have any questions, and thanks for using FixYa.

REMOVAL & INSTALLATION

2.2L Engine
See Figure 1
  1. Disconnect the negative battery cable.
  2. Drain the crankcase. Raise and support the front of the vehicle.
  3. Unfasten the exhaust shield and disconnect the exhaust pipe at the manifold.
  4. Remove the starter motor and position it out of the way.
  5. Remove the flywheel cover.
  6. On care equipped with automatic transaxle, remove the oil filter and extension.
  7. Unfasten the oil pan bolts and remove the oil pan.


jturcotte_2045.gif

Fig. Fig. 1: Oil pan installation-1995 2.2L OHV engine shown

To install:

  1. Prior to oil pan installation, check that the sealing surfaces on the pan, cylinder block and front cover are clean and free of oil. If installing the old pan, be sure that all old RTV hae been removed.
  2. Apply a 1 / 8 in. (3mm) bead of RTV sealant to the oil pan sealing surface. Use a new oil pan rear seal and apply a thin coat of RTV sealant to the ends of the gasket down to the ears and install the pan in place.
  3. Tighten the oil pan retaining bolts to 89 inch lbs. (10 Nm).
  4. On care equipped with an automatic transaxle, replace the oil filter adapter seal and replace the oil filter adapter.
  5. Install the remaining components in the reverse order of removal.

2.3L and 2.4L Engines
See Figures 2 and 3
  1. Disconnect the negative battery cable. Raise and safely support the vehicle.
  2. Properly drain the engine oil and the cooling system into suitable containers.
  3. Remove the flywheel housing or transaxle converter cover, as applicable.
  4. Remove the right front wheel and tire assembly, then remove the right splash shield.
  5. Remove the serpentine drive belt.
  6. Unfasten the A/C compressor lower retaining bolts.
  7. Remove the transaxle-to-engine brace.
  8. Disconnect the engine mount strut bracket.
  9. Unfasten the radiator outlet pipe bolts, then remove the pipes from the oil pan.
  10. Remove the exhaust manifold brace.
  11. Unfasten the oil pan-to-flywheel cover bolt and nut.
  12. Remove the flywheel cover stud for clearance.
  13. Disconnect the radiator outlet pipe from the lower radiator hose and oil pan.
  14. Detach the oil level sensor connector.
  15. Unfasten the oil pan retaining bolts, then remove the pan and gasket. Inspect the gasket for damage. If it'e O.K. you can reuse it. No sealer is necessary.

jturcotte_2046.gif

Fig. Fig. 2: After removing the oil pan, inspect the gasket. If it's not damaged you can reuse it

To install:

  1. Position the gasket, then install the oil pan. Loosely install the retaining bolts.
  2. Place the spacer in its approximate installed location by allow clearance to tighten the pan bolt directly above the spacer. Tighten the oil pan bolts to the specifications given in the accompanying figure.

jturcotte_2047.gif

Fig. Fig. 3: Oil pan tightening specifications-2.3L and 2.4L engines

  1. Position the spacer into its proper position, then install the stud.
  2. Fasten the oil pan-to-transaxle nut.
  3. Attach the oil level sensor connector.
  4. Connect the radiator outlet pipe to the oil pan and fasten with the retaining bolts.
  5. Install the engine mount strut bracket.
  6. Fasten the transaxle-to-engine brace.
  7. Secure the A/C compressor bolts.
  8. Install the serpentine drive belt.
  9. Fasten the right splash shield, then install the wheel and tire assembly.
  10. Install the flywheel housing or transaxle converter cover.
  11. Fill the cooling system and engine crankcase with the correct type of fluids.
  12. Connect the negative battery cable.

Aug 09, 2011 | 1998 Chevrolet Cavalier

1 Answer

Truck died at light found out electric control modual was bad changed it then it acted as if the starter was weak and wouldnt trurn the engine over,so i bought a new starter no change still would'nt turn...


It would be much easier to turn the engine by using a socket and a breakover on the crankshaft pulley bolt. I understand why you thought you needed to turn the engine. If you remove the spark plugs it will turn real easy because you don't have to fight the compression. Are you sure the battery didn't die on you? What year is your truck, and which engine do you have? Was there a trouble code that let you know the ecm was bad?

Jan 02, 2011 | GMC G1500 Cars & Trucks

1 Answer

Clutch is going out need diagram to print out on how to replace it


Here are removal procedures. Can I send reinstall on another ticket? I don't think they will fit in one solution... Tranny REMOVAL

1.8L and 1.9L Engines See Figures 1, 2
  1. Disconnect both battery cables, negative cable first.
  2. Remove the battery and battery tray.
  3. Remove the engine air cleaner tube and the air intake resonator.
  4. Disconnect the speedometer cable at the transaxle.
  5. Remove the slave cylinder line-to- slave cylinder hose retaining clip, then disconnect the slave cylinder line from the slave cylinder hose and plug the hose.
  6. Disconnect the ground strap from the transaxle.
  7. Remove the tie wrap and unplug the three electrical connectors located above the transaxle.
  8. Remove the electrical connector support bracket.
  9. Install Engine Support Bar 014-00750 or equivalent, and attach it to the engine lifting eyes with suitable chains or cables.

a4d73b3.gif


Fig. 1: Install a suitable engine support bar and attach it to the engine lifting eyes-1.8L and 1.9L engines

  1. If equipped, remove the three nuts from the left-hand engine support bracket.
  2. Loosen the mount pivot nut and rotate the mount out of the way.
  3. Remove the three bolts and the left-hand engine support mount.
  4. Remove the two upper transaxle-to-engine bolts.
  5. Raise and safely support the vehicle.
  6. Remove the front wheel and tire assemblies.
  7. Remove the inner fender splash shields.
  8. Drain the transaxle fluid and install the drain plug.
  9. Remove the halfshafts.
  10. Install Transaxle Plugs T88C-7025-AH or equivalent, between the differential side gears.
WARNING Failure to install the transaxle plugs may cause the differential side gears to become improperly positioned. If the gears become misaligned, the differential will have to be removed from the transaxle to align them.
  1. If equipped with the 1.8L engine, remove the intake manifold support bolts and the support.
  2. Remove the starter motor.
  3. Unfasten the gearshift stabilizer bar nut and washers. Remove the stabilizer bar and bracket from the transaxle.
  4. Unfasten the shift control rod-to-transaxle bolt and nut and remove the shift control rod from the transaxle.
  5. Remove both lower splash shields.
  6. Unfasten the transaxle mount-to-crossmember bolts and nuts and remove the lower crossmember (rear engine support).
  7. Position and secure a suitable transaxle jack under the transaxle.
  8. Remove the front transaxle mount and bracket.
630acb3.gif

Fig. 2: Removing the front transaxle mount and bracket-1.8L and 1.9L engines

  1. Remove the lower engine-to-transaxle bolts and slowly lower the transaxle out of the vehicle.

CLUTCH REMOVAL
  1. If the clutch assembly is to be reused, matchmark the pressure plate and the flywheel so they can be assembled in the same position.
  2. Install flywheel holding tool T84P-6375-A or equivalent, in a transaxle mounting hole on the engine and engage the tooth of the holding tool into the flywheel ring gear.

bbecb06.gif


Fig. 1: Install a flywheel holding tool in a transaxle mounting hole on the engine, and engage the tooth of the tool into the flywheel ring gear

  1. Loosen the pressure plate-to-flywheel retaining bolts one turn at a time, in a crisscross pattern, until the spring tension is relieved, to prevent pressure plate cover distortion.
  2. Support the pressure plate and unfasten the retaining bolts. Remove the pressure plate and clutch disc from the flywheel.

If the flywheel shows any signs of overheating (blue discoloration) or if it is badly grooved or scored, it should be refaced or replaced.
  1. Inspect the flywheel, clutch disc, pressure plate, release bearing, pilot bearing and the clutch fork for wear. Replace parts as needed.

Sep 27, 2010 | 1991 Mercury Tracer

1 Answer

How to fit a new clutch into a ford escort 1300cc 1994


1991-96 Models
See Figures 1, 2 and 3
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Remove the transaxle assembly.
  4. If the clutch assembly is to be reused, matchmark the pressure plate and the flywheel so they can be assembled in the same position.
  5. Install flywheel holding tool T84P-6375-A or equivalent, in a transaxle mounting hole on the engine and engage the tooth of the holding tool into the flywheel ring gear.



0900c1528008df86.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 1: Install a flywheel holding tool in a transaxle mounting hole on the engine, and engage the tooth of the tool into the flywheel ring gear
  1. Loosen the pressure plate-to-flywheel retaining bolts one turn at a time, in a crisscross pattern, until the spring tension is relieved, to prevent pressure plate cover distortion.
  2. Support the pressure plate and unfasten the retaining bolts. Remove the pressure plate and clutch disc from the flywheel.

If the flywheel shows any signs of overheating (blue discoloration) or if it is badly grooved or scored, it should be refaced or replaced.
  1. Inspect the flywheel, clutch disc, pressure plate, release bearing, pilot bearing and the clutch fork for wear. Replace parts as needed.

To install:
  1. If removed, install a new pilot bearing using a suitable installation tool.
  2. If removed, install the flywheel. Make sure the flywheel and crankshaft flange mating surfaces are clean. Tighten the flywheel retaining bolts to 71-76 ft. lbs. (96-103 Nm) on the 1.8L engine or 54-67 ft. lbs. (73-91 Nm) on the 1.9L engine.
  3. Clean the pressure plate and flywheel surfaces thoroughly. Position the clutch disc and pressure plate into the installed position and support them with a dummy shaft or clutch aligning tool. If the clutch assembly is being reused, align the matchmarks that were made during the removal procedure.
  4. Install the pressure plate-to-flywheel retaining bolts. Tighten the bolts in the correct sequence to 13-20 ft. lbs. (18-26 Nm). Remove the alignment tool.



0900c1528008df87.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 2: Position the clutch disc and pressure plate into the installed position and support them with a clutch aligning tool


0900c1528008df88.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 3: Tighten the pressure plate-to-flywheel retaining bolts to specification in the sequence illustrated
  1. If the release bearing was removed, lubricate the release fork where it contacts the bearing and install the bearing in the fork.
  2. Install the transaxle assembly.
  3. Lower the vehicle.
  4. Bleed the hydraulic clutch system, if needed.
  5. Connect the negative battery cable.
  6. Road test the vehicle and check the clutch for proper operation.

Sep 30, 2009 | 1994 Ford Escort

Not finding what you are looking for?
2001 Mitsubishi Galant Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...