Question about 1995 Toyota Hi-Ace
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Drive to Gondwannaland. Third exit on right. See Dealer. Reject offer. Go home and try to pry off the panel. Break screw covers. Unscrew things and pry again. Break door handle cover. Unscrew and pry. Unscrew and pry. Pop the bottom. Lift it out. Let it hang. Find the solenoid. Unplug. Hang the door cover. Drive to the parts store with a loosely-hanging door cover. Replace the solenoid. Use a hammer because you are mad! Get it together! Go to the junk yard for broken plastic parts. Cuss. Drink beer. Be glad you can lock your truck!
Posted on Sep 15, 2009
You should be able to just unlock the door with the key, and even if the alarm is still going of try to start it the key should override the alarm.
Posted on Sep 15, 2010
SOURCE: i put a new battery
That happen to all the time when I work with cars that have an aftermarket alarm.
First; disconnect the battery again and locate the override switch by the steering column lower panel, got to be there somewhere.
Now reconnect the battery, press that switch and turn the key on. that little procedure would reset the aftermarket alarm.
Posted on Dec 25, 2010
SOURCE: replaced batery in key fob
reprogram the remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times. insert key into ignition switch. switch ignition on and off twice to program a remote transmitter code whilst erasing the original codes or three timre to check how many remote transmitters are currently registered.remove key from the ignition switch.system should now lock and unlock.twice to indicate programming mode or one to four times,slowly to indicate number of remote transmitters registered.for the solara press and hold lock and unlock remote buttons together, press lock remote button for a second period of 1 second. system should now lock and unlock vechicle.once to confirm, twice to indicate registration has failed.if required repeat button procedure to program remaining remote transmitters.note to exit programming mode close drivers door or insert ignition key.maximum of 4 remote transmitters can be programmed.if akk failed let dealership reprogram remote transmitters.
Posted on May 18, 2011
Tips for a great answer:
Jul 20, 2015 | Cars & Trucks
Jul 01, 2015 | 1998 Nissan Altima
Apr 23, 2015 | 1994 Chrysler Concorde
Feb 16, 2015 | 1996 Volkswagen Golf
Aug 07, 2014 | 2011 Chevrolet Silverado 1500
Nov 16, 2011 | 2006 Chrysler 300
Dec 26, 2009 | 2000 Jaguar S-Type
Jun 22, 2009 | 2004 Jaguar S Type
Sep 26, 2008 | 2006 Honda Accord
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: