Question about 2005 Renault Laguna 1.8

1 Answer

Rear wheel clunking noise and squeeling noise sometimes

This noise only started 1 week ago only passed nct two weeks ago passed on every thing

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 82 Answers

This sounds like it could either be brakes or a wheel bearing going bad. You can check this by removing the rear wheel and inspecting the brakes making sure the caliper is mounted on tightly and brake rotor isn't showing uneven wear. Also be sure to check the brake pads to make sure that they are not worn down to the squealer tabs. Most new pads are roughly 3/8" -1/2"thick. and will start squealing if at about 1/8"-1/16" thick. If everything checks out fine then check the wheel bearing by simply jacking the wheel up off the ground and grabbing. Now try to move it side to side or up and down, it should have no play what so ever. And spin the wheel to listen for screeching or squealing, it should rotate smoothly with no abnormal noises.

Posted on Apr 17, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front end squeeling noise on 2007 honda accord


could be the power steering pump itself. If it has a bad bearing it will do that. Especially when you turn it makes the steering pump work a lot harder.

Aug 31, 2017 | 2007 Honda Accord Sedan

1 Answer

Suddenly, No tail lights, brake lights, turns signal or back up lights At 83000 miles, 6 months ago, replaced head gaskets. 1 week later, service engine soon light came on. Tech said it was an oxygen...


just look for the blackened/burned pin on the rear light plastic connector and sand it down to re-establish a good electrical connection and save yourself $800 big ones on replacing the multiswitch.

Jun 26, 2011 | 1999 Chevrolet Venture

1 Answer

Ford F150 2004 4x4 passenger side rear wheel noises


You can try the bearings but I think if you take off the rear rotors and look at the emergency brakes you'll find the problem. You might want to ride the emergency brake a little in lieu of removing the rotors to confirm the problem. Also some wheel covers make noise-drive without them and see if it helps.

Jun 18, 2009 | 2004 Ford F150

1 Answer

Squeaking from wheel area


If you replaced the hub assembly did you make sure to lube your wheel and hub bearings? I would also try to lube that entire side of the car as well. Tie Rod ends can make a squeel as well so just make sure to grease anything in that general area. If it is a clunking noise or a squeeling when you turn it may be your axle shaft installed wrong and those little splines on the end can get rubbed off real fast causing heat and noise problems real fast. If all this checks you may want to look into a possible rack and pinion problem or maybe a steering gear. I would lubricate everything first though. Good Luck!

May 20, 2009 | 2002 Ford Explorer

1 Answer

Clunk in front end when take off or stop


sounds like there is brake equip in rear brke not installed properly

Mar 10, 2009 | 2000 Buick LeSabre

3 Answers

Engine noise on area of pulleys and sometimes engine tries to sto


Don't know if this helps. Had squeel in belt area. Occasionally engine would stop when squeel got loud and sometimes engine would try to quit while going at various speeds. Found tensioner pulley was bad and changed it. Still squeeled and engine would stop when squeel got loud. This time while sitting in yard. Further checking found binding in power steering pump. Will be putting on new one tomorrow. Hope it works. Will update.

Nov 28, 2008 | 2004 Ford Freestar

Not finding what you are looking for?
2005 Renault Laguna 1.8 Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

xxxxxx xxx

Level 3 Expert

4869 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...