Question about 1996 Chevrolet Impala SS
Check to make sure that the battery is not defective. 12.5 volts . Make sure your connections are clean and tight, but do not over tighten or you may strip out the battery terminal, and then you will have to purchase a new battery. Check your fuses in the engine compartment either on the fender or the firewall. If everything checks out then check the connection to the started make sure you are getting power down there. 12.5 off battery lead. If all else has checked out okay, then i can only assume that the solenoid to the starter has gone bad, either replace it or more importantly replace the entire starter. To eliminate future problems from reoccurring
Posted on Apr 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 03, 2014 | BMW Cars & Trucks
Jan 23, 2013 | 2008 Chevrolet Uplander
Aug 20, 2012 | 2003 Chevrolet Cavalier
not starting or turning over indicates towards multiple possibilities. It can
be issue with battery or weak battery. But if battery checks out ok, then it
can be starter issue or faulty alternator or problem with low fuel pressure or
no spark at spark plugs due to dirty spark plugs or faulty ignition
coil or injectors getting cracked or dirty and needs to be cleaned.
confirm the problem, the basic troubleshooting is required.
this link below and follow the troubleshooting:------
This will help.
Jun 23, 2010 | Cars & Trucks
Jun 23, 2010 | 2006 Dodge Durango
Sep 11, 2009 | 2002 Pontiac Grand Am
Jun 30, 2009 | 1999 Oldsmobile Alero
Feb 04, 2009 | 1998 Chevrolet Cavalier
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: