Question about 2004 Ford Escape

Open Question

Letak nomor mesin ford escape 2000 cc tahun 2003

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: headlight went out in 2003 ford escape i have

you have to remove the whole headlight assembly, then pop off the front cover pull the old bulb out and put the new one in. reverse the process to re-install. there is a small plastic tab on the topfront of the headlight assembly, that is what you need to release to get the clear cover off and get inside.

Posted on Oct 07, 2009

  • 312 Answers

SOURCE: Ford Escape 2003. Engine suddenly overheat.

Engine over heating can be caused by a number of things. When you say the water pump and radiator appear to be ok I am also guessing that you checked the coolant level to make sure it is normal.

If the level is low then you obviously have a leak. Insufficient coolant circulating will not cool the motor properly because it won't be able to draw enough heat out. If the level is normal then you need to check the thermostat to make sure it is opening properly. To do this, run the motor to temperature and check the top and bottom hoses. They should both be hot and firrm once the thermostat opens meaning the circulation loop is operating properly. If the top is hot and firm and the bottom is cold/soft or collapsed then the thermostat isn't opening.

If the thermostat is operating properly then you ned to look for some other obstruction or cause for coolant loss. Check the head/intake gaskets, hose connections, hoses, over flow tank, radiator fins, radiator side tanks etc..

Good luck.

Posted on Jun 10, 2010

Testimonial: "Thank you for your quick response. I will get the head/intake gasket checked."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Posisi nomor mesin ford escape 2004


Posisi nomor mesin ford escape 2004
sudah ketemu belum pak? saya lagi nyari juga nih....

Sep 10, 2012 | 2004 Ford Escape

1 Answer

Di mana letak no mesin cherokee v8???


dimana letak nomor mesin grand cherokee tahun 2012??

Feb 09, 2011 | 2003 Jeep Grand Cherokee

1 Answer

Looking for torg specs on tire lug nuts on a 15passenger van f350


Hello there
FORD TRUCK
Wheel Nut Torque Specifications
Make/Model Description Years Torque Make/Model Description Years Torque
FORD (continued)
FORD TRUCK
E250 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
E350 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
Escape - 2003-01 98
Excursion - 2003-01 160
Excursion - 2000 148
Expedition - 2003-01 150
Expedition 19mm Hex 2000 100
Expedition 21mm Hex 2000 150
Expedition - 1999-97 100
F Super Duty Pickup 10 Lug, 9/16" 2003-99 165
F Super Duty Pickup 10 Lug, 9/16" 1998-96 140
F150 Pickup - 2003-01 150
F150 Pickup 19mm Hex 2000 100
F150 Pickup 21mm Hex 2000 150
F150 Pickup - 1999-88 100
F250, F350 Pickup 8 Lug, 9/16" 2003-01 160
F250, F350 Pickup 8 Lug, 9/16" 2000-99 148
F250, F350 Pickup 8 Lug, 9/16" 1998-88 140
Ranger, Windstar - 2003-87 100

Feb 01, 2011 | 2008 Ford F-350

1 Answer

Ford Escape 2003 Have good battery charge but


New battery needed or a trickle charger when vehicle not being used

Jan 03, 2011 | 2003 Ford Escape

1 Answer

What would cause my 2003 ford escape to idle around 2000 to 3000 rpm after it has been running for a while. it runs fine when it is first started up.


If your A/C is on , or you are running the climate control in the defrost windshield mode , the engine will idol higher than normal.
A Vacuum leak could also cause a high idol.. check the vacuum lines and be sure they are in good condition and all plugged in.

Jul 15, 2010 | 2003 Ford Escape

2 Answers

What is the schedule replacement mileage for a 2003 Ford Escape Timing Chain


If your car has a chain there is not a scheduled replacement. A timing chain should last as long as the engine. No need to replace the chain. Now things can happen such as a guide wearing out or a drive / driven gear wears out, then a chain should be replaced. You do not need to replace a chain under normal usage. *** Now the 2000 - 2004 Escape with a 2.0L (4 cylinder) does have a BELT and yes, belts should be changed (Ford recommends) every 60,000 miles or 7 years which ever comes first.

May 21, 2010 | 2003 Ford Escape

1 Answer

Need to see the firing order on the block engine span.jajahWrapper { font-size:1em; color:#B11196; text-decoration:underline; } a.jajahLink { color:#000000; text-decoration:none; } span.jajahInLink:hover...


You didn't specify your engine so please choose the applicable one:

2003 Ford Escape 2WD
2.0 liter DOHC L4 VIN "B"

44fb9b0.gif

2003 Ford Escape 2WD
3.0 liter V-6 VIN "1"

89ac16d.gif

2003 Ford Escape 4WD
3.0 liter DOHC V-6 VIN "1"

b55b299.gif

Jun 06, 2009 | 2003 Ford Escape

Not finding what you are looking for?
2004 Ford Escape Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...