Question about Cars & Trucks

1 Answer

I would like to locate and change the pvc valve on my 2005 mercury sable gs 3.0 liter

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 796 Answers

The best way to tell you how to locate it is to follow one of the largest hoses (it's not big...probably 3/4 i.d.) coming out of the throttle body, and follow that down to where it mates up to the pcv valve. good-day!

Posted on Apr 17, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: car stalls and then after

check the coil and spark plug wires

Posted on Jul 30, 2008

c17hydro
  • 2984 Answers

SOURCE: Location of EGR Valve

Found the info!!

This Dodge EGR valve is a certain kind of device that is mounted right on your intake manifold which controls the amount of exhaust gasses back into your engine.
On a 2005 Dakota with 4.7 liter engine (non-HO), the EGR valve is located near the intake manifold on the driver's side right up against the firewall. It's hard to spot as it sits lower than the intake manifold. To change it, remove the electrical connector. There's a red tab that needs to be pushed to one side and then you have to squeeze down on a tab to get it free. Using a 13 mm socket, remove the bolt that you can see. I had to use a 3 inch wobble extention and then a 8 inch extension with a deep well socket to reach it with my 3/8 inch ratchet. There's a second bolt that you can't see between the EGR valve and the firewall. With a little trial and error and a lot more luck, you can reach the hidden bolt with the 3 inch wobble extension and a 13 mm deep well socket. Attach the ratchet after the socket is on and remove. This one isn't easy and if there's any Dodge engineers reading this one, a couple of extra inches of clearance between the valve and the firewall wouldn't have killed you no matter what the cost accountants said. With both bolts removed, you should be able to pull out the metal pipe that connects the manifold to the EGR valve out of the manifold (Pull to the right) and then you can lift the valve out. For assembly, the metal pipe connecting the intake manifold the EGR valve has to be removed and reinstalled on the new valve. It's held on with 2 5/16th" bolts. You should put the rear bolt on tight, but leave the front bold loose for the reinstall as some adjustment is necessary to get it put back together and the rear is a pain to tighten when installed. Line up the bolts that attach the valve and get the rear 13 mm bolt (The one you couldn't see on disassembly) started. Do not start the other 13 mm bolt as you'll need to pivot the valve and pipe to the left in order to reinsert the pipe into the intake manifold. Once the pipe is in the intake manifold. Start the other 13 mm bolt and tighten both 13 mm bolts and then the 5/16" bolts holding the pipe onto the valve. Reinstall the electrical connection. Please don't forget to rate!!!!

Posted on Mar 14, 2009

  • 202 Answers

SOURCE: changing rear spark plugs

yes you have to take your front motor mount out and come along the motor forward you do not need to take the intake off

Posted on Apr 21, 2009

  • 255 Answers

SOURCE: where is the fuel pump in 2002 Mercury Sable

it is in the gas tank you have to drop the tank and it goes down in the top although i would locate the filter on the frame rail first and replace it its cheaper and i reccomend you replace it anyway with a pump change

Posted on Aug 15, 2009

  • 1 Answer

SOURCE: Need the fuse box diagram for the 1999 mercury sable gs?

fuse box diagram1999 mercury sable

Posted on Nov 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights, low beams work fine. when high beams are turned on, the left side goes out completely and there is no change to the right side.


Mercury Sable - YouTube

? 6:06
www.youtube.com/watch?v=Mlb1V5vNgFM
Jan 3, 2012 - Uploaded by 1A Auto Parts http://www.1aauto.com/1A/HeadLights/Mercury/Sable/1ALHP00223 ... Find out why. Close. How to Install Replace Headlight and Bulb Mercury Sable 00-05 ... How To Install Replace Fog Lightand Bulb 00-03 Mercury Sable

Oct 08, 2015 | 2005 Mercury Sable

1 Answer

Why isn't my speedometer working& how do I repair it? 1998 mercury sable gs


1997 Mercury Sable LS VSS Vehicle Control Sensor ...

? 2:13
www.youtube.com/watch?v=1O0kJJjjhk0
Jun 1, 2012 - Uploaded by Trevor Harris
I am trying to replace my Vehicle Control Sensor on my 1997Mercury Sable LS 3.0 Liter. Here's the ...

Sep 15, 2015 | Mercury Cars & Trucks

2 Answers

Check engine light stays on my 2005 Mecury Sable GS


Try disconnecting battery negitive battery terminal for 1min 30secs with ignition in the on position.If this fails to work a code reader is required to reset computer.... hope this helps!!

Dec 30, 2012 | 2005 Mercury Sable GS

2 Answers

Can you show me a diagram off how the serpentine belt goes on a 2001 sable


here are some pictures of the routing of the serpentine belt. this car came with two engine types and i have posted you both pictures, you select what is the one for your engine. i hope that this could help you

3.0L (2 valves per cylinder)
ganyapr_16.gif
3.0L (4 valves per cylinder)
ganyapr_17.gif

Mar 06, 2011 | 2001 Mercury Sable

1 Answer

Is the carborator in a 2005 mercury sable gs furl injectored


yes, no carburetor is used, it is fuel injected! It uses a pump and injectors controled by several other electrical items.

Sep 09, 2010 | 2005 Mercury Sable

1 Answer

Where is the fuel pump in 2002 Mercury Sable


it is in the gas tank you have to drop the tank and it goes down in the top although i would locate the filter on the frame rail first and replace it its cheaper and i reccomend you replace it anyway with a pump change

Aug 07, 2009 | 2002 Mercury Sable

1 Answer

Oil smells like gas


sometime you will get this smell if you go a little over your oil change time of every 3000 miles also check when you replace the PVC valve normally in top of the valve cover gasket cause this will cut back on the ventilation that is needed to go through your engine if you take it off and it rattles it is still good but if it has been a while since you changed it it would be a good idea to change it also

Jan 11, 2009 | 1999 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...