Question about Cars & Trucks

Open Question

ON A 1997 NISSAN PATHFINDER, WHERE IS THE ABS ACTUATOR SWITCH LOCATED?

WAS HAVING TROUBLE WITH BRAKES,BLED THE BRAKES,CHANGED THE MASTER CYLINDER,BRAKE BOOSTER,NEW BRAKE PADS & SHOES ALL AROUND,2 NEW FRONT ROTORS AND BLED THE BRAKES AND ADDED NEW FLUID AFTER EACH NEW CHANGE OUT AND THE BRAKES STILL SINK ALL THE WAY TO THE FLOOR, AS IF THERE IS AIR IN THE LINES. WAS TOLD THERE IS 1 MORE BLEEDER VALVE SOMEWHERE NEAR THE MIDDLE OF THE BRAKE LINES THAT NEEDS TO BE BLED, BUT I CANNOT FIND IT. ALSO WAS TOLD TO UNPLUG THE ABS MODULATOR WHILE BLEEDING THIS LAST VALVE BUT I DON'T KNOW WHERE THAT IS EITHER. ANY HELP WOULD BE APPRECIATED.

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: Brake pedal goes nearly to

Adjust up your back brakes, you will find the pedal will come up considerally.

Posted on Mar 29, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I change my calipers and break pads on both front wheels of my 97 nissan pathfinder bleed all 4 wheels after a few second I stroke peddle and it went all the way down to the firewall . Need help


Could be your brake master cylinder not building hydraulic pressure. If the internal seals are bad, the fluid leaks back internally, preventing pressure to build up in the lines to the wheels. If you have no leaks and you bled all wheels properly, it is probably the master cylinder.

Dec 02, 2016 | 1997 Nissan Pathfinder

1 Answer

How to bleed abs brakes when air is in master cylinder


Abs brakes have to be bled in the order the manual states, you will need a power bleeder then follow instructions in the manual. it is the abs cylinder that is hard to get the air out of, imposable if the instructions are not followed .

May 26, 2014 | 1997 Chevrolet K1500

1 Answer

How do you replace a brake pressure switch on 2005 pathfinder ?


It should be on the valve downstream from the master cylinder, but ABS systems have them on the pump.

May 17, 2014 | 2005 Nissan Pathfinder

1 Answer

1997 Nissan Pathfinder Brakes lock up when driving


Can you tell if it is front or rear brakes, and is the ABS warning light on ?

Feb 04, 2013 | 1997 Nissan Pathfinder

1 Answer

I have a 1994 nissan pathfinder, I recently changed the master cylinder, and the brakes did not change..speeding up and then applying the brake Its hard and then goes spongy but will stop but with to much...


Take the rear brake adjustes out as far as you can get them,locking up the wheels,then back them off just enough to get them to turn,you should get you pedal back.

Nov 01, 2009 | Nissan Pathfinder Cars & Trucks

1 Answer

Where is the brake light switch on a 1997 nissan pathfinder?


The brake switch is mounted high on the brake pedal. A 14mm nut holds it in place. Don't mistake it for the cruise switch if so equipped.

Jul 19, 2009 | 1999 Nissan Pathfinder

1 Answer

Brake petal goes to the fioor once and well.


you have indeed changed almost everything.  and sadly many parts that you didn't need changing.  Could you have a bad hose at the wheels or a leaking caliper?  if all else fails I would start by blocking off one circuit of the braking system...with a plug, and checking for leaks in the active system and then switching sides.  Is the system being totally bled?  that means first at the master cylinder, then at the abs cluster and then each wheel...twice.

Mar 30, 2009 | 1997 Plymouth Breeze

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...