Question about Chevrolet Malibu Maxx
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
All GM's cars and trucks are relatively the same. U just need a few tools to remove the panels without damage. one is a tool called a button popper.
1. there will be a screw inside where the door handle is. u need to remove this .
2 starting from the top left go around the outside the panel to see if there and screws holding the panel on.
3. starting with the bottom left insert the tool and lift up on the panel. u should here a pop when u lifted it enough. next goto to the bottom right. and do the same thing.
4. grab both bottom pats and gently outwards.. if its not popping as u are pulling the panel dont force it to do it. check to make sure there are no other screws hidden anywhere. (inside little plastic covers. the center area) repeat the procedure
5. when the panel is loose, pull out slightly and push upwards. this will separate the panel from the door and glass.
u can then see where the electrical connections are and complete the part u are doing.
Posted on Apr 21, 2009
The only thing that is left for you to do is to remove the stereo and then disassemble it and remove it yourself. A little daunting but needs to be done. Sounds like it went in wrong and then became jammed
Posted on Jun 10, 2009
Could be several things. The fuse relay to the AC compressor could be bad. The system may need to be recharged due to lack of refrigerant the compressor will not work unless it has enough.
Posted on Aug 04, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Nov 13, 2016 | 2004 Chevrolet Malibu Maxx
Feb 28, 2013 | 2004 Chevrolet Malibu Maxx
Sep 06, 2011 | 2004 Chevrolet Malibu Maxx
Jun 14, 2010 | 2004 Chevrolet Malibu Maxx
Jan 16, 2010 | 2004 Chevrolet Malibu Maxx
Oct 16, 2009 | 2004 Chevrolet Malibu Maxx
Mar 24, 2009 | 2004 Chevrolet Malibu Maxx
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: