Question about 1993 Chevrolet Corvette

1 Answer

Clutch noise When driving in a higher gear ( 4th,5th or 6th) if I depress the clutch and gun the engine, there is a loud grinding noise. Let out the clutch and noise goes away. From a stop, the clutch does not slip and the shifting seems okay. Could this be a bad throw out bearing, clutch fork?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 35 Answers

You got it, Bad throw out bearing!

Posted on Apr 17, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 31 Answers

SOURCE: 1999 Chevy Tracker Transmission Problem

Well it sounds like you have a the vacum for the four weel drive is trying to engage when it is in nutrial and that is where the noise is comeing from. I just think the person you took it to is just trying to make some money off of you

Posted on Oct 18, 2008

  • 1 Answer

SOURCE: 88 Chevy 1500 Pickup manual tran problem

need to pull shift leaver from top of transmition

Posted on Aug 17, 2009

Molson02536
  • 3854 Answers

SOURCE: 4l60e slips in 3rd and 4th

There are to many things that can cause this problem, best thing to is go get the ECM scanned for DTC codes at a transmission shop or Auto zone or Parts Source since they scan for free.
The ECM should have DTC code in it's memory on how the transmission is Performing and have the Transmission line tested for Fluid pressure.
Good luck and hope this helps. Oh and also ways check with more then on transmission shop if there tell you that you need a new Transmission,
It could be a simple as the transmission filter falling off causing the lost of transmission fluid pressure. Check the transmission fluid too.

Posted on May 07, 2009

SOURCE: I just replaced the clutch

Common sense here

The clutch is not the issue,if the R&R was done correctly

You have a trans or transaxle problem (internal)

You also have a possible leak

Having owned a trans repair shop in the past,
I suggest you remove the trans,strip it clean,all the
way.

Then diagnose the shifting isssue in 1 thru 3 and the
area of the leak, as you reassemble it, verses all the worry and quessing
of what if's

Posted on Feb 02, 2011

murrayhall53
  • 22 Answers

SOURCE: put all new parts on the s10 and cant get any clutch any solutions?

Have you fully bled the system

Posted on Jan 31, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 chevy truck 5 speed 1st,2nd an 3rd gear grinds or rough, 4th an 5th are fine


Either your syncro's are out or your clutch and throwout bearing need to be replaced. Normally higher gears will shipt easier. You need to chech for a grinding sound or howling when you engage the clutch.

Jan 19, 2013 | 2002 Chevrolet Silverado 1500

1 Answer

Just recently changed my clutch in my 1995 geo metro. it was working fine. car was tuned up before my long road trip from orlando to nyc. until when i reached sometime in NC, and 4th gear will not...


the shift linkage may need to be adjusted a bit or the shift forks and engaged gears for 4th and 5th may have worn enough that they need to be inspected and fixed.

Aug 12, 2011 | Geo Metro Cars & Trucks

3 Answers

Hi my rx8 is makin a grinding noise from the gearbox and the noise goes away wen foot is pressed on the clutch makes a noise wen drivin in 1st 2nd 3rd n 4th gear noise goes in 5th and the noise is there in...


What?! Really! The noise goes when the clutch pedal is depressed! So the noise goes when the release bearing (throw-out bearing) is engage? So how would that be a release bearing/clutch problem? If it didn't make a noise until the clutch pedal was depressed, it would be the release bearing! In other words its the input shaft bearing and/or counter shaft bearing in the gearbox. Stop giving people bad advice

Mar 11, 2011 | 2004 Mazda RX-8

2 Answers

While driving and shifting into 5th gear the engine suddenly stalled. Now it will not start When I depress the clutch and turn the key it wants to to turn over but the result is just a grind like noise....


driving along in 5th gear but then after about 30 seconds it pops out of gear and i have to put it back into 4th coz it wont go back into 5th.

Oct 23, 2009 | 1998 Kia Sportage

1 Answer

Won't go into gear to drive. may be transmission?


If the clutch has never been changed most likely it is that. The way you can check it is by removing the transmission and looking at the clutch disc. It could be transmission syncros but I am willing to bet you just need a new clutch.

May 24, 2009 | 2001 Kia Sportage

2 Answers

Clutch Sometimes Slipping in 4th and 5th gears!


Hi Jackiaria

Unfortunately you have a hydraulic clutch, which is self adjusting on your car.

The problem you are experiencing is the excessive wear to your clutch, or oil contamination on the clutch plate.

Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected.
There is also a possibility of excessive wear, or scoring, on the flywheel surface, the longer you drive the vehicle with a slipping clutch, possibly requiring the flywheel to be skimmed.

Shop around for a best price, and a trustworthy garage !

Good Luck !

A FixYa rating would be Nice....Thanks.....John.

Feb 17, 2009 | 2000 Hyundai Elantra

1 Answer

Shifter seems to have shifted


just ram the shifter in your booty,.....duh

Dec 31, 2008 | 2003 Toyota Celica

1 Answer

2001 Honda Civic manual will not shift


my old honda did that too. replace the clutch, it's probably the pressure plate.

Dec 24, 2008 | 1995 Honda Civic

1 Answer

Trans noise growling metal...3rd,4th and 5th low speed


I'm not sure, but that sounds like the throw-out barings. If thats the case and they went before the clutch did, then their could be some big problems up ahead.

Jul 31, 2008 | 2000 Toyota MR2 Spyder

Not finding what you are looking for?
1993 Chevrolet Corvette Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...