Question about 1990 Chevrolet Corvette
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Unless there is something wrong with you buttons the procedure is as follows:
1. Turn ignition key to ON (not start)
2. Press ENG MET button on trip monitor & release, then press it again within 5 seconds.
3. Within 5 seconds again press and hold GAUGES button until Change Oil lamp flashes.
4. Continue Holding Gauges button until lamp stops flashing & goes out.
5. You should be done, start & shut off car. If it didn't work turn off car and start from top.
Some buttons are very sensitive so try and be deliberate & steady when holding.
If that helps please rate my answers!
Posted on Mar 19, 2009
After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.
Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer. Thank you for using FixYa.
Posted on Oct 19, 2011
Tips for a great answer:
Jan 05, 2015 | 1990 Chevrolet Corvette
on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks
Nov 27, 2011 | 2004 Chevrolet Tahoe
Nov 27, 2011 | 1992 Chevrolet Corvette
Oct 19, 2011 | 1990 Chevrolet Corvette
Sep 20, 2010 | 2003 GMC Sierra
Oct 08, 2009 | 1993 Chevrolet Corvette
Nov 18, 2008 | 1994 Chevrolet Corvette
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: