Question about Mitsubishi Lancer

1 Answer

4G91 Mitsi no power at all

No power at all was stalling at traffic lights, altered timing and seems to be better but a bit worried I may have advanced it too much. Cheers Billy ChCh NZ

Posted by on

  • Billy
    Billy Apr 17, 2014

    Timing belt may of sliped a tooth or the module in the disy maybe faulty but I'm not certain as I dont know anything about these bitsashiti's

  • Billy
    Billy Apr 19, 2014

    This is a carburated twin cam motor.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Mitsubishi Expert
  • 267 Answers

Sounds like it could be the cam belt has slipped. Do a verification of the alignment setup.

Posted on Dec 03, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75108 Answers

SOURCE: engine stalls while sitting at traffic light. seem...

To correct this problem I want you to get a can of intake cleaner (ABOUT $5.00) from any local auto parts store like NAPA or Carquest, do not use carburetor spray, intake cleaner only or u will damage the Teflon coating inside the throttle valve and air bypass valve, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.


Posted on May 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 Hyundai Accent GL stalls in city traffic. It drives fine on the interstate but when you have to start and stop it doesn't want to go move the the next gear. i have had the o2 sensor and the ca


I would check for any codes, even if the check engine light is off. These Cars had a few different problems like this. The first is the Cam or Crank sensor failing. The second is the Timing belt jumping a tooth due to not replacing it at or around 60k. Ive seen this many times, With an advanced timing belt, it will run well, if not better than normal at cruising speeds but can cause stalling at low RPM, erratic idle, rough idle, lake of power from take off.

Mar 10, 2014 | 1999 Hyundai Accent

1 Answer

2006 diesel transit in traffic loses power even wants to stall at lights etc


This will sound silly but Diesel engines are very prone to dirty filters, this is the first thing I go to every time

Jan 01, 2014 | Ford Cars & Trucks

1 Answer

2007 Chevy Aveo 23K miles Battery Light and Brake


you have an electrical problem, 562 is:
System Voltage Low(pasted from obd2 index, sorry for caps)
the battery light is not a battery light its a charge idiot lamp.
it means, the alternator can not charge the battery.
the light glowing means literally, the alterntator has shut down!
at that moment the battery begin is death spiral, that is its discharges until the EFI goes nuts, or spark goes weak
get a volt meter, connect it to the CIG light.
or go to any autostore in USA, cant speak for others.
and see the CIG lighter tester, its has LEDs to tell you
good bad or ugly, id never use this but id use a real DMM
connected to to the CIG light (i use this because its easy to get to)

now 12.6 vdc is battery charging.
start car and 13.3 to 15v is alternator is working. if not in this range
the (lower means shut down, higher means out of control (bad)

it is that simple, better cars have a voltmeter in the dash.
you have a blown fuse, to the ALT,
or bad wiring,
it can be just corroded battery cables. or ends.

keep in mind when the engine stalls, may ) lamps in the I.P cluster come one, this only signals you , the engine stalls.

look for coronation on all 4 paths from Alternator to battery.
that includes the Alterator Ground, (case)
keep and open mind, most alternators replaced are good.
this is because of 2 reasons, no meter. or doing the tests wrong.

i might add, that some batteries short a cell , every other speed bump, so just because it tests ok , now dont make it good.
is your battery 7 years old? (see date code on same) July 2006?

The alternator can be hard to diagnose, it can in fact shut down
at faults and this makes diagnosis hard. just knowing this one
fact , allows you to up the levels of testing.
also some cars the PCM controls the ALT .

so you do have a primary DC power distribution error.
Causing the Alternator to Shut down.

Oct 23, 2013 | 2006 Suzuki Forenza

1 Answer

Loss Of Power, Stalling, Backfiring, and Dieing in Reverse


Sounds like secondary ignition to me. When was the last time you chenged the spark plugs, cap, rotor, or spark plug wires?

Jul 29, 2012 | 1990 Toyota Celica

1 Answer

1993 Honda Civic Hatchback Idle problem?


have you checked for moisture in gas tank..get a bottle of gas line antifreeze and put it in gas tank and see if it drives better if it does then fill it up and try to keep your tank always no lower than 1/2 and 1/4

Dec 25, 2009 | 1993 Honda Civic 4 Door

1 Answer

Hyundai i30 Diesel automatic won't accelerate above idle at light


DOES THE ENGINE MIL WARNING LIGHT COME ON? WITH OUT MORE INFO YOU NEED TO CHECK MOTOR ON A CODE READER FOR STORED FAULTS, CHECK ALL AIR LINES TO EMMISION CONTROL, , SOUNDS LIKE YOU HAVE GONE INTO SAFE MODE, A SPLIT OR LEAKING PIPE ON THE INTERCOOLER IS A COMON FAULT ON THESE, IF YOU SWITCH ENGINE OF AND BACK ON QUICKLY WITH MOTOR RUNNING WITH OUT STALLING MOTOR AND IT CLEARS THEN IT IS PROBERLY THE SAFE MODE CUTING IN MEANING A FAULT HAS BEEN SEEN BY PCM

Dec 07, 2009 | 2008 Hyundai Elantra

3 Answers

1999 Toy Rav4..feels like going to stall..loss of power


2001 Toyota Rav4 (D4)..feels like going to stall...behind red traffic light..

Jun 05, 2009 | 2001 Toyota RAV4

1 Answer

Engine stalling in stop & go traffic


sound like to me you have a clogged catalytic converter

Apr 27, 2009 | 2001 Chevrolet Blazer

1 Answer

Mr2 automatic


I suggest probably hydrocarbons blocking the throttle system. so get the throttle bodies on your ca cleaned, Pour a bottle of fuel system cleaner into the tank and run it exclusively on Shell V-Power petrol. DD tried this and the car ran a lot better.

Apr 27, 2009 | 1991 Toyota MR2

1 Answer

89 Chevy Corsica keeps stalling while driving


. Have it checked for a trouble code. It seems like a sensor problem. ( Idle position , crankshaft position, camshaft position sensors could be bad. Also the EGR valve could be bad. with a caode you can narrow it down a bit.

Feb 06, 2009 | 1989 Chevrolet C/K 3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...