Question about 1995 Mercury Villager

1 Answer

I have a 1995 Mercury Villager. Replaced the engine and tranny.

I have a 1995 Mercury Villager. Replaced the engine and transmission with another one. I am having trouble with the car shifting into 2nd and 3rd hard at 3500 rpm. O.d kicks in at 4500 rpm. No problem down shifting. note: tranny fluid leaked out of the shaft and radiator when it was replaced, but i refilled the tranny to the proper level. O.D. light blinks on start up.

Posted by on

  • john217 Jun 19, 2009

    I do not see it that way at this point. I am focusing on electronic componants that might give me these symptoms.

  • john217 Jun 22, 2009

    found out my tranny is in limp mode. I need to know if anybody knows a cheap code scanner that can read alll codes on the mercury villager?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 249 Answers

Sounds like you bought a bad tranny,was it a used 1 you bought?

Posted on Jun 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is crankshaft pisition sensor for 1995 mercury villager


1995 Mercury Truck Villager Van 3.0L EFI SOHC 6cyl

The Crankshaft Position Sensor is located: Under hood, passenger side, lower engine area, front of crankshaft pulley, mounted in engine block.

Jul 22, 2015 | Mercury Cars & Trucks

1 Answer

I have a mercury villager 1995 and need to know where I can get the bottom of the transmission tray.


Your Mercury Villager is so old (in vehicle years) you may have resort to searching through junkyards to find a used part.

Jan 28, 2015 | 1995 Mercury Villager

1 Answer

Had transmission replaced in 2001 Mercury mini van. How does one reset the sensor so the van recognizes the new transmission?


there is nothing to recognize. The engine is waht has to be reset for.
You can disconnect the battery for 2 hours to clear the Keep Alive Memory.

go here for Villager help

http://groups.yahoo.com/group/villagerquest/

Jun 14, 2010 | 2001 Mercury Villager

2 Answers

Transmission slipping 1995 mercury villager


make sure there is enough fluid if there is you might want to have it re built or changethe filter but if it has over 75000 mi that might kill it but it is worth a try as you could still have it re built if a new filter kills it

Oct 29, 2009 | 1995 Mercury Villager

2 Answers

Overheating,smoking and dying.now it ont start at


What is overheating ? Engine or tranny? You said you put tranny fluid in, but not in the engine right? Engine sounds like it is toast. Is there any abnormal look to the engine oil on the dipstick? Are you losing coolant?
If you add coolant with engine NOT hot, and watch the radiator fill spout with engine started and warming up, do you see water gurgling?
Do a compression test.

Sep 27, 2009 | 1995 Mercury Villager

1 Answer

1995 Villager Engine light is on


you may have a broken crankshaft snout.This was a common problem on 93-95 Villagers if customer replaced a/c belt and overtightened the belt tensioner.

Did you ecently have the belt changed?
Also, remove distributor cap and rotor ( 1 screw) and slotted plate/ Look for brown dust on optical sensors. If yes clean them and see if van starts. If it starts you will need a new distributor (ebay $200) as the bearing is going.

more help from our villager/quest team

http://autos.groups.yahoo.com/group/villagerquest/

May 24, 2009 | 1995 Mercury Villager

1 Answer

Location of the engine diagnostic connector 1995 village mercury


The diagnostic connector is located on the engine near the starter. However, there are four connectors in that location and without pictures it would be difficult to determine which is the proper one

Mar 08, 2009 | 1995 Mercury Villager

2 Answers

1995 mercury cougar transmission


sounds like its time for a rebiuld or new transmission

Jan 16, 2009 | 1995 Mercury Villager

Not finding what you are looking for?
1995 Mercury Villager Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5522 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...