Question about 1995 Chevrolet S-10 CA Edition

1 Answer

SORRY ! New here and thought this post followed the one I just read...I am trying to remove the door panel on 95 Chevy s10 pickup...I have removed the 2 screws in the door grip, the screw behind the door handle, pryed the top, sides and bottom....it won't budge..appears door handle in the way and i can't figure out how to get it out of the way. I have pryed around it and all!!!! I just need to replace side mirror! PLEASE HELP !!!!

Posted by on

  • maipres Jun 19, 2009

    emissionwiz
    -I tried to lift it up and over but the plastic behind the handle is in my way- You know of course this is a woman trying to do this

  • yadayada
    yadayada May 11, 2010

    u must move the panel up and over the door handle

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

You need a tool to slide behind the door handle and remove the little horseshoe shaped clip that holds it on

Posted on Jun 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove door hinges on 1997 chevy s10?


its probably the door hinge pins. use a floor jack to support the door. have it jacked up slightly to get the weight off the pins before removing. chevy should have a kit for it

Apr 24, 2014 | 1997 Chevrolet S-10 Pickup

1 Answer

How do I remove the passenger side door panel from a 1994 Chevy S10 pickup??


hi there

there will be phillips screw on outside of door panel and usually one where handle is once removed all of them you pull pull gently and there will be pastic rivet clips that you have to get loose once all are loose lift upward and remove from door have a wonderful day thank you

Aug 22, 2011 | Chevrolet S 10 Cars & Trucks

1 Answer

1986 chevy s10 trying to remove center bearing on


theres a collar on the youk.remove it and tap it out its splits the tow pieces of drive shaft.use alot of pb blaster and make sure you grease the youk theres a grease fitting there

Mar 27, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

How do I replace the drivers side mirror on my 1998 chevy s10?


You would have to remove the door panel and then just unbolt the mirror from the inside.

Mar 20, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

How do I remove drivers side door panel on 1998 Chevy S10 pickup to repair/replace window regulator?


i think there are screws around the door handle on the in side that need to be taken off the the rest just pop out

Feb 01, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

Scanner for a chevy 95 S10


Was it made in Canada? Late model 95 right? Its a OBDII, check the manufacture dates on the inside of the drivers door it will tell you.

Jul 12, 2009 | 2003 Chevrolet S-10

1 Answer

How do you remove the door panel of a 1995 Nissan XE Pickup


Not sure about the 95, but to remove it on my 94 i just pulled on once corner till the fastener poped out, then worked slowly around removing each fastener. Be careful as the the door pannel is quite flimsy but if the 95 is the same as the 94 it should be fairly easy to remove.

May 18, 2009 | 1991 Nissan Sentra 2 Door

2 Answers

Chevy S10 Pickup Starter. Removed the two bolts


Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Mar 14, 2009 | 1998 Chevrolet S-10 Pickup

2 Answers

1998 chevrolet k-1500 heater-core replacement


Remove the heater hose clamps and the hoses from the engine side of the firewall. From the inside under the dash on the pass. side, remove the lower panel screws and slowly pry the lower cover down and the heater core will slide out of the heater box. Installation is reverse of removal.

Sep 20, 2008 | 1995 Chevrolet S-10 CA Edition

Not finding what you are looking for?
1995 Chevrolet S-10 CA Edition Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...