Question about Mercedes-Benz 300-Class

1 Answer

Car will not turn over,hazards don't work,just get a clicking sound under bonnet and dash lights keep dimming

Do I have to do all the resets mercedes e320 cdi w210 2001

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercedes-Benz Master
  • 1,174 Answers

Replace the battery my friend.That's all.The present battery is DEAD.

Posted on May 14, 2014

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
mmptruck
  • 124 Answers

SOURCE: car problems

Sounds to be a loose or corroded wire/s at either starter motor or at battery fusible links.
Also check the earth strap (Cable) between engine and bodywork.
Hope this helps, MMP

Posted on Aug 09, 2008

riceski
  • 1851 Answers

SOURCE: Is there a battery under the bonnet of the

No sir - you have no separate battery in the car for that.

Posted on Apr 01, 2010

  • 1 Answer

SOURCE: I have a Mercedes C220 cdi diesel Automatic 2002;

i hve a mercedes benz c220 cdi, 2005 manufactured model. my problem is dat deres no pick up in my car. in comparison wth my cclass,, a maruti 800 can go faster den my merc....
few months back my merc ws over heated for wich i hd replaced the injectors but afr this incidenent the major problem is vry slow pick of the car... i hd also cleaned up the cathalic convertors but problem solved....pls suggest me wat are the few reasons for non pickup...

Posted on Jul 18, 2011

  • 6 Answers

SOURCE: 1999 pontiac bonneville

alternator may be bad would cause dimming of lights and cause car to not start.

Posted on Mar 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 pontiac bonneville


alternator may be bad would cause dimming of lights and cause car to not start.

Mar 10, 2012 | 1996 Pontiac Bonneville SE CA Value

2 Answers

My turn signals won't come on at all?


check the fuse if good then turn on the hazard lights if they work then you probably need a turn signal flasher which is a separate flasher unit then the hazard one.it usually looks like the hazard one so with the hazards on and locate it then you will know what the signal flasher looks like and you will also know not to change the wrong flasher unit.the signal flasher is often located at or near the under dash fuse panel or somewhere in the dash you don`t say what type of car your talking about.

Dec 12, 2011 | Cars & Trucks

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

2 Answers

Where is signal flashing relay located on car? my signal light just stays on when turning left or right and does not flashr blink.


TURN SIGNAL/ HAZARD FLASHER MODULE IS BELOW LEFT SIDE OF DASH. IF THE HAZARD LIGHTS WORK YOU CAN LISTEN FOR THE CLICKING.

Jan 22, 2011 | 2002 Buick Century

3 Answers

Driver side headlamps very dim ,sometimes low beams do not work either side , high beam pass side works correctly .


trying to solve the same problem, novice back yard machanic, if your an expert you would know there is no ground to the headlight bulb there is a small current and a large current and the ground is in the Turn/hazard headlamp switch assembly and in the daytime running lamps relay. Still can't find the relay though I think it's bad think it's under the dashboard still tryng to find it, I keep hearing a clicking sound under the dash behind the fuse box taking apart the dash to find problem will keep you updated.

Apr 18, 2010 | 2003 Pontiac Sunfire

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

1989 Lincoln Town Car Turn Signal Relay location


Thats strange they should be on the fuse panel ! Are you sure !!!!

Aug 12, 2009 | 1989 Lincoln Town Car

1 Answer

My turn signals dont work but my hazard lights are blinking. everything else in my car works just fine. my brother says that it was the hazard switch thats shorted out and the relay is causing a clicking...


Did the battery get changed recently? There is a small black box under dash near steering colom that has a little red button on it. Press the little button for a few secounds allowing it to reset the security system. It should stop your marker lights from flashing. It was a stock security for that year. The box is about 4 inch square and is usually just under dash near your knee. Good luck.

Nov 18, 2008 | 1997 Subaru Outback

3 Answers

Turn signals wont work


replace the hazard fuse under the dash any repair shop can heklp you with it

Aug 31, 2008 | 1999 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...