Question about 1994 Toyota Tercel

1 Answer

Timingbelt replaced oil seal on crank replaced timing belt started up running rough timing advanced too far

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,961 Answers

It is likely the belt is one tooth out of position

Posted on Apr 17, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 119 Answers

SOURCE: 7mge have oil leak

hi if your engine 22R front engine first in side timing cover where engine bully fitted there is oil seal, next valve cover front side between cover and head there seal not like oil seal half cercle shap it makes leak also front side of the camshaft there is oil seal..

Posted on Nov 08, 2008

michigan man
  • 3533 Answers

SOURCE: engine idles rough, misses at 2500-3000 rpm's

i would first check the timing and if that does not fit i would take the cover back off and look at the belt for a bad or missing tooth

Posted on Feb 14, 2009

  • 124 Answers

SOURCE: 96 Toyota Camary. Engine ran fine but had a oil

cherry red? you may have a clogged cat. convertor

Posted on Mar 12, 2009

  • 318 Answers

SOURCE: runs rough

Those tubes actually screw out. You could try unscrewing the tube and resealing it with your favorite sealer and it just may stop the oil leak.

Posted on Jul 15, 2009

  • 1 Answer

SOURCE: oil leak problem with 1996 toyota camry

I am going to see a mechanic - my trusted mechanic who does not nickel and dime me - to see what this is. I have the same problem and he told me he has never done this job on a Camry and is unsure. Given the miles, he has suggested that maybe it is time to part ways with the car. I am going to ask him if he will put some florescent dye in it and let me drive it for 50-100 mi and then check to see where the leak is and fix it. Let you know what happens. I have to try, the car is solid.

Posted on Aug 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 peugeot 206 GTI 180 cambelt changed at 82,000kms water pump now leaking advised to change cambelt at same time as replacing water pump odometer is now at 92,000 kms. What do you think?


when replacing the pump if the timing belt has to be removed , it is not necessary to replace the belt PROVIDING THAT THE FOLLOWING PROCEDURE IS FOLLOWED
before removing the belt mark it with an arrow indication direction of movement replace the belt with the arrow correctly position as before removal
timing belts ( for want of a better description) breakin from running in a set direction
if replaced running in the reverse direction then the "breakin" gets far worse and early belt failure occurs
when the belt was replaced , if the cam seals , crank seals idler and hydraulic adjuster were not replaced then it might be worthwhile to have it done with the water pump as oil on a belt reduces the life to about 1/2

Mar 23, 2017 | Peugeot Cars & Trucks

1 Answer

94 Honda Accord made a chugging noise after turning it off and now it won't start up.


sounds like youre timingbelt snaped.pull the timing chane cover and inspect the belt. if so make sure valves are not bent. if timing belt is ok makesure battery has full charge hondas dont like to start on a week crank. if cranking are fine check the fuel pump.

Dec 02, 2013 | Honda Cars & Trucks

1 Answer

88 300zx Replaced timingbelt, plug's, fuel pressure is 50 lb, new fuel rails new injectors timed right, the old timing belt was bad for about 5 inch section and the right hand cam was out of time...


remove timing belt and move crank shaft and cam shaft tiltiming marks are in the rigt places, put belt back on making sure not to move either pulley, being that far out of time should not cause any internal damages, but will prevent vehicle from starting.

Oct 23, 2011 | Cars & Trucks

3 Answers

I have a 1991 S15 Jimmy with a 4.3L, is it better or worse for the timing to be advanced?


Neither

Should be close to Factory Recommended setting

Should be same--half way thru firing order or
you have a worn timing chain

Feb 16, 2011 | 1991 GMC S-15 Jimmy

1 Answer

1988-1993 ford festiva leaking oil around the crank pulley... could the oil be coming out of timing chain seal... are could it be a the seal on the crank shaft.. if so would i need to removle the engine to...


This sounds like the crank seal, the engine doesnt have to be removed, in order to get to seal is like replacing the ttiming belt, and once in the timing belt i would replace the crank and cam seals, also do the timing belt, and maybe the waterpump, you will need to remove the crank pulley and then the timing covers then align timing marks for timing belt before ou remove it, with timing belt off the crank pulley then slides off the crankshaft and the seal is behind it, the cam shaft gear unbolts and the seal is behind the gear, once the gears are off then you will be able to remove the seals from the engine,heres a few diagrams to help. good luck and i hope this is helpful,60d826b.gifca916fa.gifcb2cb5a.gif

Oct 31, 2010 | 1993 Ford Festiva

3 Answers

1995 toyota camry leaking oil from behind the timing belt cover. Isn't this a major repair? Is the leak more than likely a camshaft seal?


If you haven't had the timing belt replace (60,000 miles is the suggested service intervale) this is an overlap of having the timing belt replaced.
If the timing belt is not due for replacement and its the cam shaft seal that is leaking. Its a pretty easy fix. Remove the top timing belt cover , and the crankshaft sensor wiring you may have to remove the front engine mount . Set #1 piston at TDC, Loosen tensioner w/ spring slip off belt. **Remove sprocket pull out old seal with a sharp pick. Greese and install new seal make sure its flush with its bore . Reistall sprocket. Slide belt over Cam sprocket tighten tensioner. Install cover and mount (if applicable) Check timing marks by turning crank two revolutions.
** If CamSprocket Bolt is difficult to remove then remove valve cover and use a 21mm wrench to hold the Camshaft while you crack off Cam Sprocket Bolt.
You will see the groves on the Camshaft where you can place a wrench to hold the shaft.
After you replaced the seal replace the valve cover gasket ONLY IF YOU HAD TO REMOVE THE COVER TO HOLD THE CAM WHILE REMOVING ITS BOLT.

This is about as major as it gets.

May 12, 2010 | 1995 Toyota Camry

2 Answers

92 toyota camry timing belt not turning car quit running,took dist.cap off not turning,tore down to timing belt real greasy there and timingbelt covers belt not broke or off trys to move a little when you...


Hello tim42220: y name is Roger and I will help. If the timing belt does not turn when you crank the engine the belt is bad. The belt has a habit of striping the teeth of a the crankshaft gear. This engine shows to be a non-interference engine. That means if the belt breaks the valves should not bend. This is something you should be able to do if you are mechanically inclined. Main thing is to be sure all timing marks are right. I would strongly recommend replacing the water pump at the same time. The water pump is turned by the timing belt. Should the water pump go bad it will also damage the timing belt. They do make a timing belt kit that includes the belt and all new timing belt idler pulleys. You will need to reload the belt tension-er. This is the worst part as it is hard to reset the plunger. Easier to by a new one but they are not cheap. If you look at the new belt you should see two solid stripe markings and one stripe that is a dotted line.I would also replace the camshaft seals as they are the reason for the oil leaking onto the timing belt. When installed correctly the marks align with the timing marks on the engines cam and crankshaft. Enclosed is a picture of the timing marks.Should you need further help please just ask. Please rate your answer. This way I know it helped. Thank You for using Fix Ya. Roger6f56668.jpg

Mar 20, 2010 | 1992 Toyota Camry V6

2 Answers

1990 Honda Accord DX 5 speed no power/2 cylinders not firing?


ok.....as far as the oil on them it is possible it is only the spark plug tube seals located on the inside of the valve cover,in fact if you can remember when you took the old plug wires off the boots of a couple propably had oil on them.now as far as the real problem I would recommend checking the timing belt it is possible it jumped time,its pretty simple just remove the valve cover(gonna replace the seals anyways)and top timing cover.roll the engine around and look for the cam and crank marks.if you need anymore suggestions or help let me know have a good day DB

Feb 27, 2009 | 1990 Honda Accord

1 Answer

Fuel injector/timingbelt


absolutely nothing at all... if the timing belt wasnt installed properly it would bend valves or run rough.. but NOT have a thing to do with fuel injection system

Nov 28, 2008 | 2002 Mitsubishi Galant

Not finding what you are looking for?
1994 Toyota Tercel Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...