Question about 2007 Kia Rondo LX V6

Open Question

2007 kia rondo v6 p2422 code

Replaced canister vent valve. p2422 keeps coming up. Canister air filter clean. no debris in ducts

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75117 Answers

SOURCE: i have codes po430 and p2422 kia sedona

P0430 Catalyst System Efficiency Below Threshold (Bank 2)
P2422 Evaporative Emission System Vent Valve Stuck Closed

Posted on Jun 19, 2009

  • 4044 Answers

SOURCE: change front rotors kia rondo 2007

Remove the tire, remove the brake calipers, 2 bolts on back side of rotor, remove the carter pin that retains the bolt position if equiped, remove the center nut. When you pull the rotor off watch for a set of bearings to drop out. To install the new rotor reverse the process.

Posted on Sep 17, 2009

  • 1201 Answers

SOURCE: I have a code P2422 on a 05 Kia Amanti. What would

The evaporative emissions vent valve is stuck closed. Probably needs to be replaced.

Posted on Oct 20, 2009

  • 67 Answers

SOURCE: engine light came on kia 2007 rondo

you need to have the code read to see what it is most auto parts store can do that for free that will help use tell you what it is

Posted on Mar 04, 2010

  • 111 Answers

SOURCE: were is the fuel filter

IT IS INSIDE THE FUEL TANK . IT IS MADE INSIDE THE FUEL PUMP IT IS SERVIECABLE AND RECOMMENDED EVERY 30K . THERE IS A ACCESS TO THE TANK UNDER THE SEAT THERE IS A FEW SCREWS THAT HOLD IT A COVER DOWN REMOVE THIS AND YOU CAN ACCESS .
REOMOVE FUEL PUMP AND TAKE APART THE ACTUAL PUMP SEATS INSIDE THE FILTER .IF YOU TRY TO DO IT YOURSELT BE SURE NOT TO FORGET ANY O RINGS THEY TEND TO STAY IN THE OLD FILTER WHEN REPLACING AND IF YOU DONT SWAP OVER THE VEHICLE WILL NOT START

Posted on Jan 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is my vent valve solenoid on my 2006 Chevy Colbalt?


It's located under the vehicle back behind the fuel tank , Installed in the canister ! Remove the EVAP canister vent solenoid valve from the canister !
Rotate the EVAP canister vent solenoid valve counterclockwise in order to release it from the locked position.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Disconnect the evaporative emission (EVAP) canister harness electrical connector (2) from the EVAP vent solenoid valve. Clean away any debris that may be present around the EVAP canister vent solenoid valve.
Remove the EVAP canister bolt. Lower the EVAP canister.

Feb 25, 2015 | Chevrolet Chevy Cars & Trucks

2 Answers

Emmisions system purge valve


The carbon canister and the purge valve are located in the rear of the vehicle just behind/below the fuel tank below the filler hose

Sep 17, 2012 | 2007 Kia Rondo LX V6

1 Answer

P2422


P2422 - Evaporative Emission System Vent Valve Stuck Closed

This valve is likely mounted next to the vacuum canister and got full of water. Refer to undhood emission stciker for location of valve and canister.

Aug 29, 2012 | 2005 Hyundai Santa Fe

3 Answers

2000 Ford Expedition My Expedition (4.6L V-9 2WD) has had an intermittent problem of cutting out. The Check Engine light was not coming on - so I figured it is not a misfire. It drove just like it had...


Continuous Memory Diagnostic Trouble Code (DTC) P0446 or P1450 indicates that Self-Test has detected the Evaporative Emission Control System has excessive fuel tank vacuum. Also, a DTC P0446 indicates a vent control malfunction.

Possible causes:

EVAP canister purge outlet tube (EVAP canister purge valve to EVAP canister) blockages or kinks.

EVAP canister tube (fuel tank to EVAP canister) blockages or kinks.

Fuel vapor elbow on EVAP canister contaminated.

Restricted EVAP canister.

Canister vent (CV) solenoid stuck closed (partially or fully).

Plugged or contaminated CV solenoid filter.

EVAP canister purge valve stuck open.

Fuel filler cap stuck closed (no vacuum relief).

VREF circuit open in fuel tank pressure (FTP) sensor.

Damaged FTP sensor. (fuel tank pressure)

Check for kinks or bends in the fuel vapor hoses/tubes (EVAP canister purge outlet tube and EVAP canister tube).

Visually inspect EVAP canister inlet port, CV solenoid filter and canister vent hose assembly for contamination or debris.

Check CV solenoid filter for blockage or contamination.

The common things I've seen are are mud in the canister and the canister vent solenoid being shot or the wiring to the canister vent solenoid being torn off. The resistance of the solenoid should be 48-65 ohms..
Pick up a Chiltons book and will give you a diagram of where exactly you find the canister. They are like $15 at any auto store. Good luck

May 22, 2011 | 2000 Ford Expedition

1 Answer

Got a code of p0446 on my 95 gmc jimmy 4wd. what is it and how do i fix it? When do i know it is solved? Or what should i look for?


P0446 - Restricted/Blocked EVAP Vent Path.

The PCM has determined that a malfunction exists in the electrical circuit for the vent valve/solenoid in the evaporative emission control system.

Possible Causes:
Dirt and dust intrusion into the EVAP canister vent hose assembly, resulting in restricted air flow, may cause this condition.

Possible Solutions:
- Clean the EVAP canister vent hose assembly.
- Replace the EVAP canister vent valve & solenoid.

The DTC will clear once the issue has been resolved or you can clear the code with a GM approved scanner. Do not clear the code before the issue is corrected otherwise the light will keep coming on.

Jan 23, 2011 | 1995 GMC Jimmy

1 Answer

What does code 446 mean on the 1996 Chevy Blazer?


P0446 = Evaporative Emission Control / System Vent Control Circuit Malfunction.

Check it, and before you replace the Evap Canister read this:

Subject: DTC P0446 (Restricted/Blocked EVAP Vent Path) Set, Service Engine Soon (SES) Lamp Illuminated (Replace Hose/Evaporative Emission (EVAP) Canister Vent Asm) #02-06-04-037A - (02/02/2005)
Models: 1999-2003 Chevrolet Silverado Models
1999-2003 GMC Sierra Models
--------------------------------------------------------------------------------
This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 02-06-04-037 (Section 06 -- Engine/Propulsion System).
--------------------------------------------------------------------------------
Condition
Some customers whose vehicles are operated in dusty type environments, such as farming or mining off-road type applications, may comment about the illumination of the instrument panel SES light, with a DTC of P0446 (Restricted/Blocked EVAP Vent Path) being set.

Cause
Dirt and dust intrusion into the EVAP canister vent hose assembly, resulting in restricted air flow, may cause this condition.

Correction
After following the Service Manual diagnostic P0446 and determining that the EVAP canister vent valve is the cause of the SES light, replace the existing EVAP canister vent hose assembly with a new assembly, P/N 15086429. This new assembly has an enhanced filtering capability and a filter element that can be easily removed and cleaned. To ensure correct installation, follow the procedure below.

Raise the vehicle. Suitably support the vehicle.
Disconnect the EVAP canister vent valve electrical connector.
Disconnect the vent valve pipe at the EVAP canister.
Remove and retain the EVAP canister vent valve bracket mounting bolt.
Disengage, from the underbody, the two vent valve pipe clips securing the pipe to the underbody.
Remove and discard the complete EVAP canister vent hose assembly.
Position and secure the new assembly to the underbody using the existing hole and mounting bolt.
Tighten
Tighten the bracket mounting bolt to 12 N·m (106 lb in).

Install the two vent valve pipe clips into the existing underbody holes.
Connect the vent valve pipe to the EVAP canister.
Connect the EVAP canister vent valve electrical connector.
Lower the vehicle.
When properly installed, the new EVAP canister vent hose assembly will be positioned outboard of the original installation location. This new location provides clearance for accessing the filter element for cleaning purposes. To access the filter element, disengage the filter cover to valve locking finger by gently lifting the finger upward while simultaneously rotating the filter body clockwise. After approximately 45 degrees of rotation, the filter can be disengaged from the valve by gently pulling outward. The filter cover can then be removed and the filter element and body can be washed with soap and water. Prior to reinstalling, ensure that the body and filter element are dry.

Parts Information
Part Number 15086429 Hose Asm-Evap Emis Cnstr Vent

Hope help with this.

Mar 18, 2010 | 1996 Chevrolet Blazer

1 Answer

I have an 01 Kia Sephia. When I try to fill the gas tank it trips the shu-off right away. Seems like an air vent blocked but I can't find it.


the charcoal canister has come apart and the charcoal particles have traveled thru the vent system and pluged the fuel tank vent valve in the top of the tank, after the canister is replaced, youll need to replace the canister close valve, and probably drop the tank and clean out the vent hoses and remove and clean out the vent valve also, when the canister comes apart, its a mess.

Oct 15, 2009 | 2001 Kia Sephia

1 Answer

I like to now how to fix the code 0446 on kia optima 2001 2.4l engine. thanks


P0446 - Vent Control of the Evap System. This Evaporative Emissions System is very complicated. These particular DTCs (Diagnostic Trouble Codes) can be caused by MORE than they tell you. Three MAJOR components in the system can cause this P0446. 1. Charcoal Canister, 2. Charcoal Canister Filter, 3. Canister Close Valve, 4. Fuel Tank Pressure Sensor, 5. Purge Control Solenoid Valve, 6, Wiring and/or connector/connections between them and the ECU. If you wish to trust the computer's diagnostics, then replace the canister close valve (after you have inspected the Evap Charcoal Canister's air filter and find no problems with restrictions of air flow). If the problem comes back, check the Purge Control Solenoid Valve and the operation of the Fuel Tank Pressure sensor - either one of those components, if malfunctioning, can cause a P0446.

Apr 19, 2009 | 2001 Kia Optima

Not finding what you are looking for?
2007 Kia Rondo LX V6 Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...