Question about 2009 Toyota Tundra CrewMax
My toyota tundra 2009 limited i drove about 2km and shutoff the engine to buy something, when i came back it doesnt start anymore, just heard a click and engine not turning over,battery voltage is 12.4volts,after i arranged someone to tow my truck and i just close the hood hard and tried to start the truck and it start as normal.when i arrived at home shut off the truck and tried to re start maybe after 15mins and dont start anymore. there is a good advise here to check the starter relay inside the fuse panel but i dont know where is it.the click sounds I heard something in the driver side below the steering wheel. please help
Posted by Anonymous on
Look under the dash on the driver side for a fuse/relay box. There should be a label on there telling what each is for. Look for blown fuses and do the same in the box in the engine compartment.
Posted on Apr 10, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
have you checked you your spark plugs and your plug wires make sure your getting gas to the engine also
Posted on Nov 08, 2008
Agree, it sounds like the starter and it happens often on old Camry. When was the last time you had the starter replaced? The cartalk guys once suggested getting a mallet and bang on the starter and it will work. Eventually you will need a replacement. It is way cheaper to go to junkyard and get a used one (ask them to test before buy).
Posted on Feb 03, 2009
We would suggest that you look at the wiring connector under the bed, that feeds the taillamps.
You will probably find a coroded wire in the connector. If the 3rd brake lamp works, all of the fuses and switches are good.
Posted on Dec 25, 2009
Testimonial: "All connectors were fine. It ended up being that both brake light blubs blew at the same time. Thanks"
I had the same issues. Dash dead, tail lights dead. Fuses were fine, Dimmer relay was fine...So I got to the Tail Light Relay.
Removed the glove box, one screw on the right. Reach up (above the space where the glove box 'area' would be and there are 3 or 4 relays all sitting on top of a junction box. All of them were loose. I pushed them in...and voila! I was getting scared after the obvious.
Posted on Jul 21, 2012
Tips for a great answer:
Jun 07, 2016 | 2003 Toyota Tundra
Feb 29, 2016 | Toyota Cars & Trucks
Feb 19, 2014 | 2007 Toyota Tundra
Feb 15, 2014 | Toyota Tundra Cars & Trucks
Dec 31, 2013 | Toyota Tundra Cars & Trucks
Apr 16, 2017 | 2000 Toyota Tundra
Feb 16, 2013 | 2009 Toyota Tundra Double
Mar 26, 2011 | Toyota Tundra Cars & Trucks
Apr 03, 2009 | 2004 Toyota Tundra
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: