Question about 2000 Oldsmobile Silhouette
Service message keeps going on and off
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Anti-Lock and Trac Off lights are lit on my 1999 Alero, as well. They usually come on after about 5 minutes of driving, but are not always on when I start the car.
Posted on Jan 16, 2009
Tips for a great answer:
Apr 29, 2015 | Cars & Trucks
The ability of the control modules to communicate through the serial data circuit
The identification of any stored diagnostic trouble codes (DTCs) and their status
The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.
The traction control switch is a input to the body control module, with a scan tool hooked up an looking at BCM data ,check for conformation the traction control switch is turning on an off !
SERVICE TRACTION SYSTEM The IPC illuminates the SERVICE TRACTION SYSTEM indicator in the message center when the electronic brake control module (EBCM) detects a malfunction in the traction control system. The IPC receives a class 2 message from the EBCM requesting illumination. The SERVICE TRACTION SYSTEM indicator illuminates for 60 seconds when the condition is present. The IPC sends a class 2 message to the radio in order to activate an audible warning.
TRAC OFF The IPC illuminates the TRAC OFF indicator when the following occurs:
The electronic brake control module (EBCM) inhibits the traction control system due to a malfunction in the traction control system. The IPC receives a class 2 message from the EBCM requesting illumination.
The body control module (BCM) detects that the traction control switch has been pressed (signal circuit is low). The BCM sends a class 2 message to the EBCM in order to disable traction control. The IPC receives a class 2 message from the EBCM requesting illumination. The BCM sends a class 2 message to the radio in order to activate an audible warning.
Feb 25, 2015 | 2003 Chevrolet Impala
Feb 19, 2015 | 2000 Hyundai Elantra GLS
Nov 26, 2013 | Chevrolet Venture Cars & Trucks
Apr 13, 2011 | 2005 Chevrolet Impala
Apr 27, 2010 | 2008 GMC Acadia
Jun 11, 2009 | 2003 Chevrolet Impala
Apr 30, 2009 | 2000 Ford Windstar
Jul 01, 2008 | 2003 Oldsmobile Silhouette
Jun 08, 2008 | 1999 Mazda Pickup
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: