Question about 2006 Chevrolet Chevrolet Avalanche 1500 Z71
Service stabilcontrol and service park assist to
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ODB II Code P0236 &
P0236 Turbocharger Boost Sensor A Circuit ange/Performance and P0237 Turbocharger Boost Sensor A Circuit Low. I would check to ensure your Sensor is didnt come unplugged and if not I would replace the Boost Sensor. Thanks for Using FixYa!
Posted on Dec 06, 2008
P1689 No Communication between ECM & Ins
P1689 - Indicates a Data link failure between ECM and fuel injection pump. Low power, engine dereated or engine stops.
Posted on May 13, 2009
This is usually due to corroded/broken wires near the wheel bearings and axles. I would get it to a shop to see which wheel is throwing the code and then check connections and wiring. You may have accidentally bumped the button that turns the traction control off. it is on the front of the stowage compartment on the center console.
also remember that the light is always on when you are in reverse!
Posted on Jul 23, 2009
Traction control only works when one wheel is spinning faster than the other it trys to even them out so it wont spin...sometimes if one of the wheels come off the ground in an uneven area or if you take a turn too fast and one wheel turns when the other one dont it is designed to operate.
I would remove all wheels and check the braking system...Is it 4 wheel disc or rear drum ?
If it has rear drums you could have a wheel cylinder leak that will sometimes lock the wheel because of fluid contamination....This would cause both lights to come on...If you find no problems
sometimes the abs sensor builds up fragments on the magnet and makes the light come on...
or if the abs sensor is not close enough to the exciter ring it will make the light come on because it will be out of adjustment.....all you do is press the sensor inward until it barely touches the ring and it will adjust itself....You can sometimes clean the magnet if it is contaminated and make the light go off ( only after you reach 6 to 15 mph. it will go off ).If it dont go off you have to buy a sensor.
Also make sure all tires have same amount and plenty of air to keep vehicle in balance/level.
Posted on Feb 21, 2011
SOURCE: On my 2007 Chevy Equinox
i have chevy equinox 2007 LT with AWD system, my problem is that i have two messages appearing in the DIC : satbilitrack and service tracktion control. can u help me with this and tell me whats the problem and how should i fix it?
Posted on Apr 13, 2011
Tips for a great answer:
Jun 23, 2017 | Cars & Trucks
May 19, 2017 | 2001 Chevrolet Cavalier
May 03, 2017 | Dodge Cars & Trucks
May 21, 2015 | 2008 GMC Yukon
Nov 25, 2014 | Chevrolet Cars & Trucks
Jul 22, 2014 | 2005 Chrysler Pacifica
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: