Question about Chevrolet S 10
Trac light is on
Trac Light is on to tell you that the traction is low. It senses this by "looking" at the wheel speeds. If one of the wheel speed sensors has failed, broke off, wire broken, or just dirty, the computer cannot "see" this wheel speed, and turns on the trac low light. This can also cause abnormal brake pad wear, if the car is equipt with traction control. The computer will begin to apply the brake on the wheel that is spinning faster. This will wear the pads out on the side that the computer is able to "see" the wheel speed. You need to get the sensors looked at. Check them to see if they are physically in place and the wires are hooked up.
Posted on Jun 26, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 monte carlo ss
The fuel filter is located in the pressure line that runs from the fuel tank to the engine,
near to the fuel tank.
Keep the engine off for few hours before replacing the filter, to get rid of some pressure in the lines.
Posted on Feb 27, 2009
Get the codes.This will help in getting to the root of the problem.If you want you can jack the car up and check the scraping noise in the front tires.You could have a bad hub bearing.Getting the codes will help determine what side.
Posted on Nov 24, 2009
Tips for a great answer:
Jul 15, 2011 | 2001 Chevrolet Monte Carlo
May 29, 2011 | 2001 Chevrolet Monte Carlo
Sep 23, 2010 | 2001 Chevrolet Monte Carlo
Sep 18, 2010 | 2004 Chevrolet Monte Carlo
Oct 16, 2009 | 2002 Chevrolet Monte Carlo
76 people viewed this question
Usually answered in minutes!