Question about 2007 Saturn ION-2 Quad Coupe

Open Question

07 saturn ion with trouble code P0315

We were told it was the crankshaft position sensor, or the cam shaft position sensor. how do i know which one it is, and where are these parts?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: saturn crankshaft sensor

Right above the started. It can be removed from under the car withour taking the starer out. 5 minute job, one bolt

Posted on Oct 18, 2008

Ad
  • 3 Answers

SOURCE: 2001 Saturn SL2 cam shaft postion sensor

There are no cam shaft position sensors in this model. Check your spark plugs and the wires (boots, etc.) I had the same problem. Also a common problem in this model: if it over heats check your coolant temperature sensor. Jack up one side (drivers) of the car so less leaks out when you check it. The ones that come in the car usually crack, use the copper ones.

Posted on Nov 08, 2008

motor1258
  • 6674 Answers

SOURCE: Cam Shaft Position Sensor 1998 Saturn SL

Have a look at this link, scroll to your engine & click on picture to expand for better view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528017e904

Posted on Jan 23, 2009

  • 299 Answers

SOURCE: 99 Saturn with trouble code P0341

cam position code ,ingnition coil for 1&4 plug,probably fail plug wires or corrosion at coil and plug wires. could also be cracked 1or4 sparkplug.

Posted on Jun 16, 2009

  • 1114 Answers

SOURCE: Saturn SL-1 Cam position sensor problem

replace it before you end up spending more than you want to $$$$,regee

Posted on Dec 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't the car start with the new Crank shaft position sensor installed? 2005 Buick Lacrosse cxl 3.8l engine.


After replacing crank sensor Perform the crankshaft position system variation learn procedure. Refer to Crankshaft Position System Variation Learn !
No you don't need to replace the balancer !
Install a scan tool.
Monitor the powertrain control module (PCM) for DTCs with a scan tool. If other DTCs are set, except DTC P0315, refer to Diagnostic Trouble Code (DTC) List - Vehicle in Vehicle DTC Information for the applicable DTC.
Select the crankshaft position variation learn procedure with a scan tool.
The scan tool instructs you to perform the following:
4.1. Accelerate to wide open throttle (WOT).
4.2. Release the throttle when fuel cut-off occurs.
4.3. Observe the fuel cut-off specifications for the applicable engine.
4.4. The engine should not accelerate beyond the calibrated RPM value.
4.5. Release the throttle immediately if the value is exceeded.
4.6. Block the drive wheels.
4.7. Set the parking brake.
4.8. DO NOT apply the brake pedal.
4.9. Cycle the ignition from OFF to ON.
4.10. Apply and hold the brake pedal.
4.11. Start and idle the engine.
4.12. Turn the A/C OFF.
4.13. The vehicle must remain in Park or Neutral.
4.14. The scan tool monitors certain component signals to determine if all the conditions are met to continue with the procedure. The scan tool only displays the condition that inhibits the procedure. The scan tool monitors the following components:
• Crankshaft position (CKP) sensors activity--If there is a CKP sensor condition, refer to the applicable DTC.
• Camshaft position (CMP) signal activity--If there is a CMP signal condition, refer to the applicable DTC.
• Engine coolant temperature (ECT)--If the engine coolant temperature is not warm enough, idle the engine until the engine coolant temperature reaches the correct temperature.
Enable the crankshaft position system variation learn procedure with the scan tool and perform the following:
Important: While the learn procedure is in progress, release the throttle immediately when the engine starts to decelerate. The engine control is returned to the operator and the engine responds to throttle position after the learn procedure is complete.
5.1. Accelerate to WOT.
5.2. Release when fuel cut-off occurs.
5.3. Test in progress.
The scan tool displays Learn Status: Learned this ignition. If the scan tool indicates that DTC P0315 ran and passed, the CKP variation learn procedure is complete. If the scan tool indicates DTC P0315 failed or did not run, refer to DTC P0315. If any other DTCs set, refer to Diagnostic Trouble Code (DTC) List - Vehicle in Vehicle DTC Information for the applicable DTC.
Turn OFF the ignition for 30 seconds after the learn procedure is completed successfully.
The CKP system variation learn procedure is also required when the following service procedures have been performed, regardless of whether DTC P0315 is set.
• Engine replacement

Feb 07, 2017 | 2005 Buick LaCrosse

2 Answers

P0315 hammer h3 2006


code p 0315 refers to crankshaft position system---variation not learned ===causes engine mechanical fault ---wiring
check for correct air gap from the sensor to the rotor and check for wiring and connections

Dec 26, 2016 | Cars & Trucks

1 Answer

I am getting codes po300, po315 and po339


Definition of Diagnostic Trouble Code P0300 Category: Powertrain Definition: Random/Multiple Cylinder Misfire Detected

Definition of Diagnostic Trouble Code P0315 Category: Powertrain Definition: Crankshaft Position System Variation Not Learned

Definition of Diagnostic Trouble Code P0339 Category: Powertrain Definition: Crankshaft Position Sensor "A" Circuit Intermittent

Jun 12, 2015 | Cars & Trucks

1 Answer

2005 Dodge Neon SXT 2.0L crankshaft position sensor location to replace


P0315 - Crankshaft Position System Variation Not Learned
P0335 - Magnetic Crankshaft Position Sensor Electrical Error China OBD2 car diagnostic tools wholesale on CareUCar

Mar 20, 2014 | 2005 Dodge Neon SXT

1 Answer

What does trouble code P0315 on a 2006 Pontiac Grand Prix mean?


P0315 is a code that indicates and error from the crankshaft position sensor. Typically it is the sensor itself and not an issue with the crankshaft. The sensor itself runs from $30 to $40, but replacement may not be a DIY job unless you're comfortable under a car and removing pulleys from the front of the engine.

Mar 17, 2014 | Pontiac Grand Prix Cars & Trucks

1 Answer

Error Code P0315 on 2007 Chevy Aveo


P0315 - Crankshaft Position System Variation Not Learned

Possible causes- Crankshaft Position (CKP) sensor harness is open or shorted
- Crankshaft Position (CKP) sensor circuit poor electrical connection
- Faulty Crankshaft Position (CKP)
- Damaged crankshaft pulse wheel teeth. Tech notes Visual inspection of the Crankshaft Position (CKP) sensor and crankshaft pulse wheel teeth for damage. If crankshaft teethes are OK, replaced the Crankshaft Position sensor

Sep 11, 2012 | Chevrolet Cars & Trucks

2 Answers

WHAT DOSE THE CODE P0335 AND P0315 MEAN


CODE PO335 CRANKSHAFT POSITION SENSOR CIRCUIT. CODE PO315 - NO CRANKSHAFT POSITION SENSOR LEARNED. POSSIBLE CAUSES, CRANKSHAFT TONE WHEEL FLEX PLATE IS DAMAGED, TONE WHEEL PULSE RING MAY BE DAMAGED, ERRATIC CKP SENSOR SIGNALS WIRING CONNECTOR PROBLEM, CKP SENSOR HAS FAILED, PCM HAS FAILED.

Jul 01, 2011 | 2009 Chrysler Sebring

3 Answers

What does the code Po315 mean on my 2007 Saturn ion


That code isn't even listed in the ODB II code index. P0301 to P0312 are all misfire codes for specific cylinders on teh motor but unless you ahve a 15 cylinder engine that isn't going to be an accurate indication. The codes jump from P0213 to P0320. Reset the vehicle computer by removing the Negative battery cable for 1 minute and reconnect then wait for the check engine light to reappear and have the code read at Auto Zone or Advance Auto, they will use a code reader to read the code for free.

Feb 16, 2011 | 2007 Saturn ION-2 Quad Coupe

1 Answer

99 Saturn with trouble code P0341


cam position code ,ingnition coil for 1&4 plug,probably fail plug wires or corrosion at coil and plug wires. could also be cracked 1or4 sparkplug.

Jun 12, 2009 | 2000 Saturn SL

Not finding what you are looking for?
2007 Saturn ION-2 Quad Coupe Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...