Question about 2006 GMC Envoy

Open Question

2006 envoy front windshield wiper speeds up and slows down uncontrolable

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75066 Answers

SOURCE: Windshield Wiper motor replaced, now wipers go wrong direction

This sounds like the park circuit is shorted.

Posted on Nov 25, 2008

  • 179 Answers

SOURCE: windshield wipers turn on when I start the car.

when you

Posted on Jun 02, 2009

  • 47 Answers

SOURCE: my 2004 gmc envoy windshield wipers won't turn

the wiper switch may be defective

Posted on Jan 19, 2010

Molson02536
  • 3854 Answers

SOURCE: 2006 Envoy stalling when idels and won't stay running

Clean your Throttle body and pay attention to the Idle Air Control (IAC) valve passageway to try to clean the IAC. A dirty or faulty IAC will cause your engine to stall at idle, the job of the IAC is to open the passage way through the throttle body to regulate the amount of air to enter the engine to keep it from stalling when the Envoy is at idle.

Start with the simple and clean the throttle body and inspect any loose or damaged wire leads to the throttle body. Replace or repair any signs of damage.

Thank you for using Fixya and good luck.

Posted on Apr 13, 2010

  • 34 Answers

SOURCE: front windshield wipers turned on

If you have the automatic rain sensors try un-plugging the round "disc" on the windscreen. This is the sensor and might be shot.

Posted on Feb 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find out if the wipers on my 2006 H3 Hummeris on a relay?


The Wiper/Washer System consists of the following components:
• Windshield wiper/washer switch
• Body control module (BCM)
• Wiper micro relay
• Wiper 2 relay
• Wiper diode
• Windshield wiper motor
• Windshield washer pump
• Windshield washer nozzles
• Windshield washer solvent container
• Windshield wiper arm and blade assemblies
• Windshield wiper transmission
• WIP/WASH 10A fuse
• WIPER 25A fuse

Wiper/Washer System Description
The body control module (BCM) controls wiper motor low speed operation. The washer pump and high speed operation are controlled directly by the wiper/washer switch. The windshield wiper/washer switch supplies voltage on the signal circuits to the BCM for windshield wiper/washer operation. When WASH, MIST, DELAY, LOW, or HIGH is detected, the BCM energizes the wiper micro relay by suppling voltage to the relay coil. This allows battery voltage from the WIPER fuse to flow through the relay switched input then through the contacts and out the relay switched output to the wiper 2 relay switch contacts. Since the wiper 2 relay switch contacts are normally closed to the low speed circuit of the windshield wiper motor, the motor will operate at low speed.

Low Speed Operation
When the wiper switch is in the Low position, voltage is supplied through an internal resistor to the signal circuit. The body control module (BCM) monitors the windshield wiper switch signal 1 circuit, and energizes the wiper micro relay which will operate the windshield wiper motor. The wiper motor will operate at low speed, since the wiper 2 relay is de-energized. Low speed can also be commanded with a scan tool, by commanding Wiper Relay Cmd. ON and OFF. Refer to Scan Tool Output Controls .
High Speed Operation
In the High position, the windshield wiper/washer switch supplies voltage to both the wiper micro relay and wiper 2 relay coils. This energizes both relays and allows battery voltage from the wiper micro relay switched output to the switched input of the wiper 2 relay through its contacts and out the switched output of the wiper 2 relay to the high speed circuit of the windshield wiper motor. The windshield wiper motor will operate at high speed. During high speed wiper motor operation the wiper switch signal circuit is at the low speed signal voltage, and the body control module (BCM) supplies redundant voltage to the wiper relay via the wiper diode.

This info is out of hummer factory service manual !

Dec 10, 2016 | 2006 Hummer H3

1 Answer

My front windshield wipers will only work on high. Any suggestions?


Search Results

    My windshield wipers only work on high speed...? ' Yahoo Answers

    https://answers.yahoo.com/question/index?qid...
    Nov 11, 2006 - My windshield wipers only work on high speed. ... If it's the compound switch on the lever on the steering wheel, it can be a bit complicated to ...

    Windshield wipers - CarGurus

    www.cargurus.com > Questions > Mercury > Grand Marquis

    CarGurusMay 19, 2015 - Windshield wipers - My wipers stopped last week and the next day they ... slow or intermitt and only work on high speed and the washer wiper doesn;twork ... The LCM does not effect the operation of the motor or switch it just ...

    Windshield Wipers only working at highest setting - Ford Flex Forum

    www.fordflex.net > ... > General Ford Flex Discussions
    Feb 16, 2011 - Windshield Wipers only working at highest setting ... rear wiper worksjust fine, just the front wipers only work at highest setting. ... the wipers sometimes grinds out the gears thus only working at high sppeds. If it is the motor or Transmission for the wipers, can I fix this myself and how much would it cost me.

    Common GM Wiper Problem - YouTube

    ? 3:23
    https://www.youtube.com/watch?v=kc6e2Tmar68
    Oct 25, 2010 - Uploaded by roadragecustoms
    The windshield wipers only worked occasionally. ... My 1998 dodge ram wipers only work on high will this help me? thanks.... Express van. you have to take out the motor and the transmission from under the front of the van..

Feb 09, 2016 | Cars & Trucks

1 Answer

Why aren't electric windows, sunroof and windshield wiper delay and slow speed working?


[PDF]mini body control module - BMW-Planet.com

www.bmw-planet.com/lib/mini/BODY%20CONTROL.pdf
Always check ALL the fuse that supply power to the BC1. ... the heated rear windowand optional heated front screen until the voltage level exceeds 12.2 ... Convenience Opening and Closing of windows and sunroof ..... intermittent wipe, slow, and fastspeeds. .... Road speed has no influence over wiper speed 1 (Slow).

Nov 19, 2015 | Cars & Trucks

1 Answer

Where is windshield wiper controller


normally on the wiper stalk under the steering wheel opposite side to the indicators. Up for burst operation. down for intermittent , down again slow speed and down again for faster. Some units twist the knob for different speed intermittent operation. This unit controls the wiper operation

Apr 01, 2013 | 1985 Chevrolet El Camino

2 Answers

Windscreen wipers not working


WINDSHIELD WIPERS


It can be faulty wiper motor or blown wiper control fuse.


Do you hear any kind of noise when you starter the wiper function. If yes then fuse is ok, but issue is wiper motor.

If no movement at all and no noise then its blown fuse or shorted/loose wiper control wiring: -----

For complete troubleshooting i suggest you a helpful link with accurate solutions.

-------------

Click the link below: -------




http://alltypesofpartsreplacing.blogspot.com/2012/12/windshield-wipers-windshield-wipers-not.html

--------

These will help.

Thanks.

Dec 09, 2012 | Cars & Trucks

1 Answer

My rear windshield wiper isnt working


sounds like there is a disconnected hose somewhere from the front to the back

Jun 19, 2009 | 2006 GMC Envoy

1 Answer

Plymouth Grand Voyager SE, 1997. 3.0 litre


check to see if you have life at the wiper motor plug.if not.you have a dodgy switch.

Jun 10, 2009 | 1997 Plymouth Grand Voyager

Not finding what you are looking for?
2006 GMC Envoy Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...