Question about Opel Vectra
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
jack front of car up clean around the coil spring where it sits on the shock absober probably do this with your fingers and a screw driver to clean the grit out, then squirt some oil on he bottom of the spring and where it sits on the shock absorber do the same with tho other side.might have to repeat every 3 months especially in winter
Posted on Oct 21, 2009
I suspect you have a wire that has come disconnected in the circuit most likely the ground itself to the light
This is extensive steps to do this which you will need the actual diagrams from the manufacture. We can give them on our site as we pay them to allow us to distrubute them so there is no copyright issues come by and get the info plus help from a Mechanic
Posted on Jan 22, 2012
Vectra c boot lock is electronic, when u press the button it activates the release mechanism. No power... no activation. Plug battery in and should work. If you need something out of the boot and dnt want to put battery on fold rear seats to access the boot space, drivers door will unlock with key but rears need to be done manually by lifting latch inside..... again due to no power
Posted on May 09, 2012
Tips for a great answer:
on Feb 04, 2015 | Opel Vectra Cars & Trucks
Jul 14, 2014 | Vauxhall Vectra Cars & Trucks
Feb 07, 2014 | Cars & Trucks
Apr 09, 2013 | Cars & Trucks
Jan 09, 2013 | Cars & Trucks
Feb 26, 2012 | Vauxhall Vectra Cars & Trucks
Feb 18, 2012 | 2003 Vauxhall Vectra
Feb 18, 2012 | Cars & Trucks
Jan 18, 2012 | Cars & Trucks
247 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: