Question about 1987 Chrysler Fifth Avenue

Open Question

Vacum line schematics

I need schematics

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to get the vacum schematic for 1995 cadilliac fleetwood brougham

Should have one under the hood somewhere . On the strut tower , radiator core support , on the under side of the hood !

Dec 16, 2015 | Cars & Trucks

1 Answer

Missing vacume line

Go to manuals Its a free download your make and model

Jan 03, 2014 | Chevrolet Cars & Trucks

1 Answer

I have a vacume leak n cant find ir it is hissing behind the motor on drivers side. i need a diagram where the vacume lines should be.

Auto Zone, or others, have a book called a Haynes Manual, that has all of the diagrams and schematics with instructions and pics on how to fix just about anything on your model vehicle.

Oct 15, 2013 | 1994 Isuzu Rodeo

1 Answer

1989 corvette headlights intermittently open

check vacum lines for leaks in the headlight assembly,sometimes they dry rot,the vacum lines] it has to a vacum issue. you may need to replace the vacum lines with new vacum hose. you can but it by the foot at any parts store, but you'll need to carry a peice of old one to get exact size.trace the vacum lines from headlights to the source of vacum canister,just to be sure that the canister itself isn't leaking. look for cracks in the vacum lines along the way.if you find that the canister is cracked,it can be repaired by jb weld and repainted,just to keep it original.thank you for choosing

Dec 31, 2010 | 1989 Chevrolet Corvette

2 Answers

1995 dodge 3500 4wd wont engage have shifter on floor light wont come on or 4wd wont engage

Any time your dealing with a 4x4 system the best start is at you front axle. Its primarily a vacuum leak so check to see if the 2 vac lines are hooked up (its good to check the electric connections.). When your 4 wheel drive is engaged and the motors running you should have vacuum at one or both of thee lines depending on if your in 4 hi or low .
If no vacuum at axle check the Vacum switchs(the plug with 4 vac lines) on top of the transfer case it will have 2 feed lines(grey & green) they conect in to the into the vacum harness on back of motor (passanger side). A vacum schematic is normally located on the raditor core support (right under the hood next to hood release)
Hope this helps

Jan 20, 2010 | 1999 Dodge Ram 2500 4WD

1 Answer

What is the vacuum line schematic on a 1996 buick

vacume diagram should be in cow section under your hood spray brake cleaner avoiding exaust will change rpm allowing you to locate if it is a vacume leak if 3.8 or 3.1 check the crank sensor with a multimeter. book will tell you how but can cuse a miss if bad or harmonic balancer has damaged

Jan 15, 2010 | 1996 Buick Riviera

1 Answer

86 toyota pickup shakes and shuts off when put in gear

2 things come to mind.
1. I don't know from your description which engine it has but it may be that the distributor or vacuum advance is malfunctioning or blocked.
2. Timing is a few degrees off.
Hope this helps

May 10, 2009 | 1997 Toyota Camry

1 Answer

Automatic doesn't change gears

get a manual for the vehicle. the vacuum line schematic will be in it.

Nov 21, 2008 | 2001 Kia Sportage

1 Answer

Vacume diagram / schematics for carbureter

you can get the schematic at
online only

Jun 30, 2008 | Oldsmobile Delta 88 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides