Question about 2005 Hyundai Coupe
Add new key fob to system
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i have the same problem but mine is the sensor that is under the dash that is faulty so i had them disable it untill i can get a part that they need to order so i would have your dealer check the sensor .. if it is under warranty they will replace it for free
Posted on Mar 08, 2009
This reset for key fob Hyundai coupe year 02 to 04
Turn ignition to position two
Press lock or unlock once
Ensure indicators flash once to confirm reset
This will enable fob providing you have no other faults
Good luck barry
Posted on May 12, 2010
Did you try re-sycronising your fob? This just happened to me and it did the trick. Ther is also some strange process involving a pin number supplied with your handbook and switching the ignition on and off ut luckily didn't have to do that.
Posted on Jul 22, 2010
Pressing remote control lock button locks vehicle and activates system Fig. 1 . Indicators flash once. Pressing remote control unlock button unlocks vehicle and deactivates system Fig. 1 . Indicators flash twice.
System malfunction. Remote control added or replaced.
Access alarm system control module located under driver's side lower fascia Fig. 2 . Set memory switch to SET position. Press remote control lock or unlock button. Set memory switch to OFF position. Confirm synchronization has been successful by locking and unlocking vehicle. Repeat procedure for second remote control. Synchronization can also be carried out using diagnostic equipment.
NOTE: A maximum of 2 remote controls can be programmed. NOTE: If remote control fails, system can be deactivated as detailed in the owner's handbook.
Posted on Jul 30, 2010
This came directly from my Hyundia service guy:
Unlock the car, get in and close all doors. Turn the ignition key to ACC, press the Unlock button till blinkers flash. That's it. Get out of the car and see if it works.
Posted on Oct 05, 2010
Tips for a great answer:
Feb 11, 2018 | Hyundai Cars & Trucks
Oct 18, 2015 | Hyundai Cars & Trucks
Jul 02, 2014 | 2003 Hyundai Tiburon
Nov 13, 2011 | Cars & Trucks
May 12, 2010 | 2003 Hyundai Tiburon
Mar 21, 2010 | 2003 Hyundai Tiburon
Mar 20, 2010 | 2003 Hyundai Tiburon
Oct 02, 2009 | 2000 Hyundai Accent
Jul 12, 2009 | 2000 Hyundai Accent
Apr 03, 2009 | 2000 Hyundai Accent
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: