Question about 1999 Honda Accord

1 Answer

Brake lights are not working on my 98 honda accord. Tail lights, turn signal, backup lights are all working.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

Probably the switch underneath the brake pedal. take off the drivers kick panel and look up underneath and behind the pedal arm to see if there is a small switch behind it. its probably pushed out of the way.

Posted on Jun 18, 2009

  • Chris Corbett
    Chris Corbett Jun 18, 2009

    probably the switch underneath the brake pedal. take off the drivers kick panel and look up underneath and behind the pedal arm to see if there is a small switch behind it. its probably pushed out of the way.

  • Chris Corbett
    Chris Corbett Jun 18, 2009

    probably the switch underneath the brake pedal. take off the drivers kick panel and look up underneath and behind the pedal arm to see if there is a small switch behind it. its probably pushed out of the way.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 Honda accord tail lights wont work


Tail lights consist of running lights, brake lights, turn signals and backup lights (also tag light). Which of yours are not working?

Feb 01, 2015 | 1989 Honda Accord 4 Door

1 Answer

98 Honda accord ex, brake lights work when step on brake but headlights on tail lights not working.


check your bulbs because the tail lights are twin element one for lights and the other for brake lights. Probably the lights element is broken and only brake lights are working. The other possibility is either the tail light fuse or relay not working.

Nov 02, 2013 | Cars & Trucks

1 Answer

Tail lights stopped worked


The tail light or parking light is a different circuit from the turn signal and brake.
The tail light is the same as the parking light in front.
It could be a fuse or a problem with the headlight switch.

Dec 23, 2012 | 1996 Honda Accord

1 Answer

97 honda civic when I turn on the headlights, i have no dash light or tail lights. All other lights, backup, brake and turn signals work fine.


maybe you should have someone look at your wiring system. maybe some ground wires might not be grounded.check and make sure the right amps are in your fuse box for your lightning.

Aug 16, 2012 | 1997 Honda Civic

1 Answer

Tail light don't work on my Honda accord Ls 1997


check the brake light switch, it is located at the brake pedal... or check/replace bulbs.... check connector, sockets in the tail light assy...

Jun 04, 2011 | 1997 Honda Accord

1 Answer

1998 honda accord, with the headlights on the tail lights are on but turn signals do not work. if head lights are off turn signals work unless i apply the brake, if i apply the brake the brake lights work...


It sounds as if you have a bad earth to either one or both of your rear light clusters. If it only happens when you indicate in one direction then that is the offending side.

Nov 20, 2010 | 1998 Honda Accord

2 Answers

How do you change a brake light in a 97 accprd?


1. Open the trunk and remove the taillight cover by turning the knob.
2. Determine which of the two bulbs is burned out: tail/stoplight or turn
signal.
3. Remove the socket by turning it one-quarter turn counterclockwise.
4. Remove the burned out bulb from the socket by pulling it straight out of its socket.
5. Install the new bulb in the socket.
6. Reinstall the socket into the light assembly.
7. Test the lights to make sure the new bulb is working.
8. Reinstall the taillight assembly cover.

Nov 14, 2009 | 1997 Honda Accord

1 Answer

Brake Lights out on 1991 Honda Accord


After you have checked the fuseand the bulb connection, you may also want to check the brake switch located at top of the brake padel under the dashboard. Once you push the brake padel, the switch will trigger and the brake light will be on. Use simple 12 volt test pen or voltmeter to test the current supply. Enjoy it.

Apr 07, 2009 | 1991 Honda Accord

Not finding what you are looking for?
1999 Honda Accord Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...