Question about 1997 Mercury Villager

Open Question

98 mercury villager no spark no injector pulse

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 500 Answers

SOURCE: 98 mercury villager breake light

There may be an adjustment on the switch, not sure, but hope it helps a little

Posted on May 25, 2009

  • 432 Answers

SOURCE: it cranks but will not start

crank position sensor

Posted on Oct 04, 2009

  • 7353 Answers

SOURCE: I have no ignition spark

check the crank position sensor

Posted on Aug 31, 2010

  • 1586 Answers

SOURCE: I have a 1993 mercury capri ...that will not start

Change your fuel filter - enough clogging can prevent fuel flow, and it sounds like you have a fuel delivery problem rather than an issue with the injectors firing. The other culprit would be the fuel pressure regulator. That's what will allow line pressure to be sufficient for the engine to run. Either a failed regulator or a broken vacuum reference line to the regulator would cause that.

Posted on Aug 11, 2011

  • 207 Answers

SOURCE: 2000 mercury villager wont start hot good fuel psi

hi dont know if this relates to your car but may be crank sensor or the dizzy trigger unit i had a simlar problem turned out to be dizzy trigger unit breaking down when it got was hard 2 start when hot and as it got worse motor would cut out when drove me and a few others nuts as nothing showed up in the codes good luck

Posted on Sep 12, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Changed fuses ND now my truck won't start 98 mercury mountaineer

Which fuses did you change? I don't know what ND means? If it cranks good but won't start, have a helper crank it while you check for spark at the plugs. If spark, use a gage and check proper fuel pressure, also check fuel injector pulse. What about your security system? Can you check for applicable trouble codes. To check, you need an obd2 code reader, at least. There may not be any codes?

Sep 18, 2016 | 1998 Mercury Mountaineer

1 Answer

98 eclipse 2.0 has spark but no injector pulse on #2 or #4

Injectors are pulsed by ECU using ground. You should check if there is any current coming out from fuse box.Most fuse boxes with injector fuses will share two injectors off one pin. So you may have two wires coming out from fuse box, and it is very common to be paired 1-3 & 2-4.

Jan 07, 2014 | Mitsubishi Eclipse Cars & Trucks

1 Answer

Where is the crank sensor for a 1993 Mercury cougar xr7?

Clicking is the starter solenoid

You have a battery,cable or starter problem

The crank sensor is only for #1 cylinder recognition

If you have spark or injector pulse, you assume it is okey

Check for spark,injector pulse,fuel pressure

The starter should continue to turn over the
motor until you let go of the key

Mar 01, 2013 | Mercury Cougar Cars & Trucks

1 Answer

Injector pulse

get the injector pump checked or take an injector out to see if there is any fuel getting to it if not new pump

Aug 18, 2012 | 2000 Mercury Villager

2 Answers

I have a 2001 mercury villager. the engine light was blinking and we took it to autozone and they told us it was a cylinder 5 misfire. we changed the spark plugs, wires, cap, and rotor. the light is still...

I can almost guarantee you that you have a bad injector. You need to unplug the connector and check the resistance of that injector compared to the others. If it does not have the same resistance it is bad.

You can also use a long screwdriver to listen to the injector while the engine is running. Place the metal end on the injector and then place your ear on the plastic handle end. You should be able to hear the injector click. You can also compare this injector noise to the other injectors.

Mar 20, 2011 | 2001 Mercury Villager

1 Answer

2000 mercury villager no spark no pulse an the injectors can i get help

Replace the distributor. Rich Porter **** on ebay is $200. Best deal.

The CMP sensor is bad and you are not getting a spark or fuel injection siganl to teh engine computer.

go here and read files

Jan 07, 2011 | 2000 Mercury Villager

1 Answer

My piston 6 miss fire, but the car crank and sheaking let me know what can be please my car is minivan mercury villager 1998 3.0

Could be a lot of things,
Check spark plug wire
Spark plug
If those are good, get a compression test done to see how the cylinder is.
You could also have a bad fuel injector, which will not deliver fuel.

Jan 08, 2010 | 1998 Mercury Villager

Not finding what you are looking for?
1997 Mercury Villager Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

75822 Answers


Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides