Question about 2005 Ford F-150 SuperCab
Knocking from front of transmission at idle, when shifting and cruising at no load on driveline.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have that exact same truck and transmission and My Transmission did the exact same thing about a year ago and there was some kind of snap ring inside the transmission that broke. I originally thought it had to be an electirical problem because the truck shifted fine until OD or if i turned OD off. The 4r70w is a light transmission and i would suggest you have a shift kit put in and they make a heavier kit to beef it up.. Sorry its probably not the new you were looking for.
Posted on Apr 15, 2009
SOURCE: 2002 f150 transmission
if that is a super duty model it is likely the 100 be that as it may the 4R100 is an updated E40D. It is available with the 5.4 in the F-150 only with the California emissions package. Otherwise you get the 4R70W
you can usually "decode" the vin number. here is the link for that http://www.ford-trucks.com/vin-decoder/index.php
this appears to be an excellent site for ford truck owners as well.
Posted on Sep 10, 2009
Testimonial: "thnx, vin decode left out transmission part #"
Did you have the recall done on it ?
recall 05S28. Description: Speed Control Deactivation Switch.
It could be a blow fuse in the recall harness, if you did have it done.
Try the self test, and see what the results are. If you do not get it into self test mode, it could be the fuse in teh recall harness that is blown. The 1st revision of the recall harness was an inline ATM fuse, not sure if the revision 2 was the same. If that fuse is blown, the switch is leaking, and should be checked.
This test is a key on engine off (KOEO) test only that is conducted in park only with emergency brake fully engaged.
1. Enter self-test diagnostics by depressing the speed control OFF switch while turning the ignition key ON, making sure the engine does not start and is not running. The speed control indicator on the instrument panel will flash once to indicate that speed control module entered the diagnostic mode. Five additional flashes at this point indicate a defective speed control servo. Release the OFF switch.
2. Press the remaining switches in this sequence: ON, RESUME, COAST and SET/ACCEL.
If the ON switch is not depressed within five seconds after entering the diagnostics mode, the module times out and the procedure must be started over.
The speed control indicator lamp will flash as each switch is depressed. Press each switch in the sequence immediately after the indicator light goes out for the previous switch.
There will be a slight delay when the last button is pressed and the lamp flashes.
3. A lamp flash with the last button (SET/ACCEL) indicates that the static test passed. If the lamp does not flash with the last button and there are no additional flashes of the lamp, the switch is defective.
If the lamp does not flash with the last button, and additional flashes occur, follow the chart below for trouble codes:
— 2 flashes - BPP defective, circuit is defective, brake applied, CPP switch or jumper (if equipped).
Posted on Feb 23, 2010
Tips for a great answer:
Jan 10, 2014 | 2002 Chrysler Sebring
Aug 23, 2011 | 2002 Chevrolet Silverado 2500HD
Mar 01, 2011 | 2002 Ford F150 Regular Cab
Oct 13, 2010 | 2002 Mazda Millenia
Aug 30, 2010 | 2002 Toyota Corolla
Jan 18, 2010 | 2006 Chevrolet Cobalt
Jul 09, 2009 | 2008 Buick Lucerne
Oct 01, 2008 | 2002 Ford F150 Regular Cab
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: