Question about 2004 GMC Envoy

Open Question

How to replace shift cable ring - 2004 GMC Envoy

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Gear shift cabel\ bushing

Yes, cables are one piece.

Jul 10, 2016 | Nissan Cars & Trucks

1 Answer

My 1988 Ford Ranger with 5 speed transmission has a locked synchronizer ring. Can the rings be seperated, if so how and will it still work?

The rings are locked because they are worn excessively and you can pry them apart but the next time you shift they will lock together again. sorry but you need to buy and replace parts

Nov 01, 2015 | 1988 Ford Ranger

1 Answer

1995 Pontiac sun fire 2.2l. It had a 5 speed transmission keeps jumping out of reverse while backing up

Have to pull the trans out

Completely disassemble it

Replace all the snychro rings for each gear

Also check any shift linkage or cable adjustment

Also replace all motor & transaxle mounts

Nov 25, 2014 | Cars & Trucks

1 Answer

FOund broken Snap Ring in trans pan, and car does not shift to overdrive .

Yes, the pressure lever cable will keep the trans from going into lockup. Nothing will happen if you can't shift to overdrive.--------------------------------------------------------------------------------
Diagnostic Interface

Dec 05, 2012 | 2000 Jeep Grand Cherokee

1 Answer

Gmc envoy shift lever moves but vehicle will not come out of park

More than likely the shift cable has broken at the end, there is a plastic ring that breaks.

Oct 16, 2011 | 2004 GMC Envoy

1 Answer

Gmc envoy 04, the gear shift slides up and down but the gear did not engage. another word, the xuv won't move

The shift cable probably has broken, usually the ring at the end breaks. Below is a diagram that shows the cable (it is item #7)


Aug 30, 2011 | 2004 GMC Envoy

1 Answer

I need to the piece is that keeps the transmision

You need a gear shift cable. just had one replaced. The little plastic ring piece at teh end broke and fell off the cable and Ford stated that I needed to replace whole cable since the little piece was not sold as an individual part. To get it fix ranges from $200 -$300 unless you know how to take off steering column and replace it. The part/cable actual costs about 70-80 bucks. Good luck!

May 15, 2010 | 2001 Ford Escape

2 Answers

How do you get the shift knob off a 1989 corvette automatic

pull plastic push button up to remove. there is a snap ring that holds shifter knob on. remove snap ring pull knob up.

Apr 15, 2009 | 1989 Chevrolet Corvette

1 Answer

2003 Toyota Celica GTs 6-speed transmission problem

Grinding going into third gear only may indicate a worn syncronizer ring. There are no adjustments on the shift cables, so I doubt highly that changing the cables will help you, since you are talking about 3rd gear only. Please note: This issue may be still under warranty, if your vehicle has less than 60,000 miles and is not 5 years old. Replacement of 6-speed internal parts is best left to a pro.

Sep 13, 2008 | 2003 Toyota Celica

Not finding what you are looking for?
2004 GMC Envoy Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

76630 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides