Question about 2005 Chevrolet Impala

1 Answer

The message center shows low tire pressure why?

The message center shows lowtire pressure why? this happens often. and does message go off? how much pressure does it take for the message sign to come on?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 225 Answers

The message center wants you to check air pressure in all of your tires,one or more is low on air.Once you find the one or more that is low you will have to reset that part of the computer.read in the owners manual under low tire pressure and it will tell you how to reset the computer.

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i turn off the low tire pressure alert on the message center of my 2004 monte carlo ss?


Fill the tires close to the max on sidewall & check the spare

If the light stays on ,go to a tire store,they will replace any bad
tpms sensor in a tire & explain how to reset

Most cars require a special tool,some don't,read owners manual

Nov 20, 2012 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

I have a 2003 Impala and the low tire pressure message is on the message center. I have tried turning the light switch on and off 3 times while the car is in the on position and I have tried pressing the...


Page 2-46 of your owners manual. If you don't have one you can get on online version from the chevrolet website. Just click the owners link at the top of the page.

TIRE MON (Tire Inflation Monitor Reset)
This feature allows you to reset the tire pressure monitor after checking all tire pressures. To clear the LOW TIRE PRESSURE light from the instrument panel cluster and reset the low tire pressure monitor do the following:

1. Scroll, using the SEEK/PSCAN up or down arrows, until TIRE MON appears on the display.
2. Press the PREV or NEXT button to enter the submenu. RESET will be displayed.
3. Press the TUNE/DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.

The low tire pressure monitor is now reset.

Feb 08, 2011 | 2003 Chevrolet Impala

1 Answer

Message center keeps showing service tire pressure system soon . what is the problem .


The sensors of the tire pressure are located inside of each rim or wheel, sometimes get dirty sending error messages like this or low pressure in one tire

Dec 28, 2010 | 2003 Chrysler Town & Country

1 Answer

Service tire monitor on what is the problem? how do you reset the system?


TIRE PRESSURE MONITOR SYSTEM
The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. If your vehicle has this feature, sensors are mounted on each tire and wheel assembly, except the spare tire. The TPMS sensors monitor the air pressure in your vehicle's tires and transmit tire pressure readings to a receiver located in the vehicle.

The TPMS is designed to alert the driver, if a low tire pressure condition exists. This system also allows the driver to check tire pressure levels using the Driver Information Center (DIC).

When a low tire pressure condition is detected, the TPMS displays the "CHECK TIRE PRESSURE" warning message on the DIC, and at the same time illuminates the low tire pressure warning symbol.

You may notice, during cooler weather conditions, that the tire pressure monitor light, located on the instrument panel cluster, and the "CHECK TIRE PRESSURE" message will appear when the vehicle is first started and then turn off as you start to drive the vehicle. This could be an early indicator that the tire pressures are getting low and need to be inflated to the proper pressure.

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper inflation pressure for those tires.)

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

The "CHECK TIRE PRESSURE" warning message and low tire pressure light (telltale) will appear at each ignition cycle until the tires are inflated to the correct inflation pressure.

The Tire and Loading Information label (tire information placard) shows the size of your vehicle's original tires and the correct inflation pressure for your vehicle's tires when they are cold.

Your vehicle's TPMS can alert you about a low tire pressure condition but it does not replace normal tire maintenance.

NOTICE: Do not use a tire sealant if your vehicle has Tire Pressure Monitors. The liquid sealant can damage the tire pressure monitor sensors.

RESETTING THE TPMS IDENTIFICATION CODES
Each TPMS sensor has a unique identification code. Any time you rotate your vehicle's tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. Each tire/wheel position is matched to a sensor, by increasing or decreasing the tire's air pressure. The sensors are matched to the tire/wheel positions in the following order: LF TIRE (left front tire on the driver's side of the vehicle), RF TIRE (right front tire on the passengers side of the vehicle), RR TIRE (right rear tire on the passengers side of the vehicle), and LR TIRE (left rear tire on the driver's side of the vehicle).

You will have one minute to match the first tire/wheel position, and five minutes overall to match all four tire/wheel positions. If it takes longer than one minute, to match the first tire and wheel, or more than five minutes to match all four tire and wheel positions the matching process stops and you will need to start over.

The TPMS sensor matching process is outlined below:
  1. Set the parking brake.
  2. Turn the ignition switch to "RUN" with the engine off.
  3. Turn the headlamp switch from "OFF" to the parking lamps setting four times within three seconds. A double horn chirp will sound and the TPMS low tire warning light will begin to flash. The double horn chirp and flashing TPMS warning light indicate that the TPMS matching process has started. The TPMS warning light should continue flashing throughout the matching procedure. The "SERVICE TIRE MONITOR" message will be displayed on the Driver Information Center (DIC).
  4. Start with the driver's side front tire.
  5. Remove the valve cap from the valve cap stem. Activate the TPMS sensor by increasing or decreasing the tire's air pressure for 10 seconds, then stop and listen for a single horn chirp. The single horn chirp should sound within 15 seconds, confirming that the sensor identification code has been matched to this tire and wheel position. If you do not hear the confirming single horn chirp, you will need to start over with Step 1. To let air-pressure out of a tire you can use the pointed end of the valve cap, a pencil-style air pressure gage or a key.
  6. Proceed to the passenger's side front tire, and repeat the procedure in Step 5.
  7. Proceed to the passenger's side rear tire, and repeat the procedure in Step 5.
  8. Proceed to the driver's side rear tire, and repeat the procedure in Step 5.
  9. After hearing the confirming horn chirp for the left rear tire, check to see if the TPMS warning light is still flashing. If it is, turn the ignition switch to LOCK to exit the sensor matching process. If the TPMS warning light is not flashing, the five minute time limit has passed and you will need to start the process over beginning with Step 1.
  10. Set all four tires to the recommended air pressure level as indicated on the Tire and Loading Information label.
  11. Put the valve caps back on the valve stems. The spare tire does not have a TPMS sensor. If you replace one of the road tires with the spare, the "CHECK TIRE PRESSURE" message will be displayed on the DIC screen. This message should go off once you re-install the road tire containing the TPMS sensor. The "SERVICE TIRE MONITOR" message is displayed when the TPMS is malfunctioning. One or more missing or inoperable TPMS sensors will cause the service tire monitor message to be displayed.

Nov 23, 2010 | 2006 GMC Yukon

2 Answers

The words tire reset keep on popping up on my dashboard. What does that mean, and how do I get rid of it? 2004 Ford Freestar.


With and without "Mesage Center" respectively (pretty sure)

With the engine on...

Push "Setup" button, until your driver display says something like "Press Reset for system check".

Then push Reset. The system check will start, rotating through a series of checks.

About the fifth or sixth check will be the tire pressure. The system will sound the tone (same one that starts w/the light) and It'll say something like "Check Tires Pressure" on that moment press and hold for 3 or 4 seconds Reset. When you release the Reset button It'll show "Hold Reset if tires are OK". While that's up, hold the Reset button. After 3 or 4 seconds, the tire warning light will blink 2 or 3 times and then will stop .You need to be ready for it, because you don't get very long to release.

How to reset the low tire pressure warning if the vehicle does not have the "Message Center"

Turn the ignition to the ON position,
depress and Trip/odometer button (located in the instrument cluster) until "TIRE RESET" or "CHECK TIRE AND RESET" is displayed in the odometer display window.
Once "TIRE RESET" or "CHECK TIRE AND RESET" is displayed, press and hold the button for three seconds.
The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.

This information is in the Owners Manual

Hope it helps

Nov 04, 2010 | 2004 Ford Freestar

2 Answers

What does it mean when the warning SERV_TPM come on


Hello, SERV-TPM means Service Tire Pressure System. There could be several items to bring up this message. It could be a bad sensor in one of the wheels. It could also be the sensors require programming. The best way to find out is to have the system checked for codes. Before you do any of the above. check the placard on the drivers door for the correct pressure then check each tire with a gage. Thank you

Sep 07, 2010 | 2006 Hummer H3

1 Answer

Why does it show the message: LOW TIRE PRESSURE


there is a tire pressure sensor on each tire check the air pressure on each tire and recalibrate the system each time you put air in any of the 4 tires or if any of the tire gets low air.Its like teaching the system on the present tire air pressure.One thing more the valve on each tire are special valve that have electronic part inside so make sure you dont replace them with an ordinary tire valve.Recalibrating shld be done on workshops with the proper tool

Jan 30, 2010 | 2008 Ford Focus

3 Answers

Where is the low tire reset button located on 2005 ford freestar?


It is on the same button as the Trip Odometer. Cycle through until you see Tire Reset and hold the button down.

Mar 28, 2009 | 2005 Ford Freestar

2 Answers

2004 Lexus Ls 430 Low tire


My 2004 Lexus LS 430 has had the light come on several times, even after changing all four tires. There are no tire pressure sensors on my four tires. I was told the car computes tire rotations and since a low pressure tire takes more rotations than a fully inflated tire, the computer puts up a message on the dash.
To reset/turn off the message, put the emergency brake on, start the car and reach below the dash to the right side of your steering column until you feel two buttons in a depressed area under the dash. One button turns on /off your smart key and the other will turn off your tire low pressure message. Depress and hold until the message on your dash goes out and you are good to go. I know this works, I just reset mine a few minutes ago.

Mar 18, 2009 | 2005 Lexus Ls 430

1 Answer

2005 ford freestar reset light on


Vehicles Without Message Center To reset the system, press and hold the odometer reset button and wait for the "TIRE PRESSURE SET" light to illuminate. Continue to press the button for 3 seconds, then release. After 3 seconds, the low tire pressure warning lamp will flash 3 times, indicating that the low tire warning system reset procedure is complete.
Vehicles With Message Center To reset the system, press and hold the SETUP button and wait for the message center to display "REST FOR SYSTEM CHECK". Then press the RESET button and wait for the message center to display "HOLD RESET TO RELEARN". Press and hold the RESET button for 3 seconds. The message "HOLD RESET TO RELEARN" and the low tire warning lamp will flash 3 times, indicating the reset procedure is complete.

Mar 12, 2009 | 2005 Ford Freestar

Not finding what you are looking for?
2005 Chevrolet Impala Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6910 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...