Question about 2005 Chevrolet Silverado 2500HD 2WD

2 Answers

2005 chevrolet 4x4 bang/knock/clunk

My 2005 chevrolet 2500HD with auto trans 6L vortec with push button select 4x4, when i put in 4x4 i get a bang/clunk sound from the transfer
case area when i turn the wheel

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 434 Answers

Sorry to tell you, the transfer case shift fork is going bad. Fix it ASA, or it will cost you another few hundred dollars for a planetary gear.

Posted on Jun 23, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 353 Answers

Do not use 4 wd on hard dry surfaces

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Chevy Avalanche 4x4 1500 Transmission issues


Could be several different problems - first step is to check for error codes (DTCs) and follow up if any.

Jul 03, 2017 | Chevrolet Avalanche Cars & Trucks

1 Answer

What is the best programmer for towing with my 05 silverado 6.0 2500hd


ppe makes the best tuner for a duramax, just dont push it too high unless you are ready to rebuild the trans and make sure you install at least a hundred gph lift pump along with it, a must for towing.

Mar 13, 2011 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Service engine soon light came on went to auto parts store the readout on the diagnostic tool indicated it was the knock sensor. They sold me one I have a chiltons manual it states there are two located...


yes, unfortunately the intake manifold will need to be removed to get to the knock sensor. make sure you have all gaskets and tools handy before you start this procedure.

Aug 12, 2010 | Chevrolet Silverado 2500HD Cars & Trucks

1 Answer

2005 5.3 vortec top in no oil pres just got truck good moter or bad moter


have to see if the oil pump strainer is clooged...oil ports clogged??? was the motor taken care of...valve covers loaded up with sludge??? pan comes off the rest is to be looked at...if she was run on no oil pressure I sure would be suspect of this motor being in poor condition. Does it run???? Is it knocking?smoking? banging or clunking? if not put a gauge on the oil pressure sending unit hole and see if it really has no oil pressure or perhaps it has a bad sender?

May 06, 2010 | Chevrolet 1500 Cars & Trucks

1 Answer

2005 Chevrolet Silverado 2500HD 4x4 Oil Change Reset


Not positive 05 is the same but on my 02 you turn the key to the on position and pump the gas pedal 4 times.

Mar 29, 2009 | 2005 Chevrolet Silverado 2500HD 2WD

2 Answers

2002 Chevy Silverado clunking noice when shift from 2wd to 4hi


It is somewhat Normal Depending on how Loud the Clunking is. This is a Common Complaint on the Chevy 4x4's. I have verified this through the Dealerships here in Oklahoma and they all say the Same thing But, I am with you, They should go into 4x4 without that Clunk for as much as we pay for them.

Jan 26, 2009 | 2002 Chevrolet Silverado 2500HD

1 Answer

'03 GMC 2500HD 4x4 problems


Take your positive cable off battery and wait a few minutes..This resets the computer and takes it out of limp mode.Theres been a lot of problems in the dash so if you can find an auto zone and have them scan it They'll do it for free.But as far as the lights my truck does the same thing. Just flick your fingers on the buttons and they should flash..The plug in the back of buttons was loose..

Dec 17, 2008 | 2003 GMC Sierra 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...