a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Click the clock button to the left of the cd slot and then turn the tuning knob to move it forward or back- then click the clock button again to do the minutes and move with tuning knob, then click clock button again to select either 12hour or 24 hour (military time- example 7pm=1900 hrs). the buttons with numbers on them are to save presets on the radio of your favorite stations- just push and hold the number you want it on after you have tuned it in with the tuning knob until it beeps and then it will be in the memory.
Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. To exit, press any button/knob or wait five seconds http://www.chryslercommercialvehicles.com/jeep/download/pdf/manuals/2014-Patriot-OM-1st.pdf page 240
Please perform the following procedures while the car is parked. Otherwise you risk getting into an accident while your attention is not focused on the driving.
Entering anti-theft code
The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
Turn on radio. The radio display shows "SAFE".
Press the FM1/2 and DX buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
Once the code shown on the display is correct, press the FM1/2 and DX buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
The radio should unlock and be usable shortly afterwards.
If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
If you lose your radio code, contact your Audi dealer.
Other Preferences & Configurable Options
The following is the procedure on how to access some other preferences that you may set in the Audi Delta CC radio.
GALA and Turn-on Volume Settings
Turn off radio.
While pressing and holding the TP button, turn on radio. "GALA" will be shown in the display.
To select the speed at which GALA activates, press the tuning up (up-arrow) or tuning down (down-arrow) buttons to the left of the volume control knob. The display shows the following:
__' Highway speed _'_ City speed '__ Slow speed
To save the setting, press both the tuning up and tuning down buttons simultaneously. "GALA" disappears.
Press the TP button briefly, "VOL" appears in the display.
To increase or decrease the turn-on volume, press the tuning up or tuning down buttons.
To save the setting, press both the tuning up and tuning down buttons simultaneously. "VOL" disappears.
To activate GALA, push the Treble control knob to let it spring out. Then, pull it out one more detent, and then turn the knob to the right. To deactivate GALA, do the same except turn the knob to the left. Push the knob back in when you're done.
turn off radio-push set up button on right side of display-hour will flash-turn the tune knob on right side to change hour-push knob to set hour and minutes will flash-turn knob to set minutes. when time is set push tune knob
Use the preset buttons to enter the five-digit code (I assume that you have that; if not, see below).When it is entered correctly, the radio will start playing.
If your vehicle is equipped with a navigation system, press and release the TUNE knob; the number ‘‘0’’ appears on the display.
If ‘‘0’’ is the first digit in your code, press and release the TUNE knob to store it.
If ‘‘0’’ is not the first digit in your code, turn the TUNE knob left or right until the first digit is displayed.
Press and release the TUNE knob to store it. Enter the remaining digits the same way.
If you make a mistake entering the code, do not start over; complete the five-digit sequence, then enter the correct code. You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.
If you don’t have the code, a dealer can access your code with your radio’s serial number. To access the serial number, turn the radio on. It must display ‘‘CODE’’, then turn the radio off. Push the preset 1, preset 6, and power buttons at the same time, then quickly release.
Hope this helps you.
First things first, if you havent already done so, check the owners manual. If you lost it or dont have one, i suggest 1 of these 2 procedures:
1.) Next to the radio, there should be 2 little holes. They are actually buttons. One of these has hours or "h" above it, while the other is labelled minutes or "m". Use a pen to press those little buttons to set the correct time.
2.) Use the knobs to tune the radio (AM/FM and volume) to set the time. This is how it works:
-Press and hold the Time button -The "hours" on the display should flash -Turn the radio tuning knob to set the correct time -Press and hold the tuning knob -The "minutes" on the display should flash -Set the correct time
Then you should either wait for it to stop flashing or press the time button to set it.
To adjust the clock, press the tune knob for longer than 1.5 seconds. A beep signals entry into the clock adjustment mode and CL appears in the display. The hours will be blinking. Rotate the tune knob to adjust the hours to the desired level.
Press the tune knob a second time and the minutes will start to blink. Rotate the tune knob to adjust the minutes to the desired level. After 10 seconds, the radio or CD display will reappear. Once the clock is set to the desired level, press the knob repeatedly until the radio or CD display reappears.