Question about 2003 Suzuki Aerio

1 Answer

Radiator fan can not run automatically - 2003 Suzuki Aerio

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 157 Answers

Why not? is it outta water? fan switch trouble? relay problem?
i must ask,,,did you jumper the fan motor and prove it runs?
now you need the car to give you power and ground

Posted on Apr 17, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does radiator fan work when air is on but not when heater is on?


Have you waited long enough?
Sometimes it can take 5 -10 minutes before it turns on while using heater.

Oct 22, 2015 | Toyota RAV4 Cars & Trucks

1 Answer

Why do both radiator fans run on high any time the engine is running,...hot or cold


There are certain positions for the climate control system that will cause the A/C system to activate. When the A/C is on, the radiator fans automatically run to provide airflow thru the condenser coils in front of the radiator. This could be the issue. Turn off the climate controls and recheck.

Aug 02, 2014 | 2009 Chevrolet Tahoe

1 Answer

Where can I find the mercedes C240 radiator fan terminal


The fastest way to check a radiator fan is to turn on the a\c while idling , this should automatically turn on both fans at once, if they don't come on first check the fuses then the fan relay. If the motors are working when the a/c is on then your thermoswitch has gone bad (its located somewhere on the radiator, look for two wires coming out of it)

Nov 18, 2013 | 2002 Mercedes-Benz C-Class

1 Answer

2007 Mercedes Benz R 320 blower fan comes on when ignition is shut off


If you're talking about the radiator fan and it's electric, then it's normal for it to run after ignition is turned off. Fans will typically run for a few minutes to cool down the radiator coolant then shut off automatically.

Sep 07, 2011 | Mercedes-Benz R320 Cars & Trucks

1 Answer

My saturn 2001 sl2 is getting overheated, found out that the cooling fan does not run


radiator fan starts automatically,try running the engine for 3 minutes the fan should run automatically

Jul 20, 2011 | 2001 Saturn SL

1 Answer

How to change a radiator


1988–91 Models
  1. Disconnect the negative battery cable.
  2. Properly drain the cooling system into a suitable container.
  3. Disconnect the fan motor and motor connector.
  4. Disconnect the upper and lower radiator hoses.
  5. Disconnect and plug the automatic transaxle cooling lines at the radiator, if equipped.
  6. Disconnect the coolant reservoir overflow hose.
  7. Remove the radiator attaching bolts and brackets.
  8. Remove the radiator with the cooling fan attached.
  9. Remove the cooling fan and shroud from the radiator. NOTE: Check all cooling system hoses for any signs of damage, leaks or deterioration and replace if necessary. To install:
  10. Attach the cooling fan and shroud to the radiator and install the assembly.
  11. Attach the radiator bolts and brackets. Tighten the radiator bracket bolts to 7 ft. lbs. (10 Nm).
  12. Connect the coolant reservoir overflow hose.
  13. Connect the automatic transaxle cooling lines to the radiator, if equipped.
  14. Connect the upper and lower radiator hoses.
  15. Connect the fan motor and thermo-switch wire connector.
  16. Refill the system with the proper type and quantity of coolant, check for leaks and bleed the cooling system.
  17. Reconnect the negative battery cable. Fig. 7: Cooling system components — 1988–91 engines 86833085.gif
1992–95 Models
  1. Disconnect the negative battery cable.
  2. Properly drain the cooling system into a suitable container.
  3. Disconnect the fan motor and motor connector.
  4. Disconnect the upper and lower radiator hoses.
  5. Disconnect and plug the automatic transaxle cooling lines at the radiator, if equipped.
  6. Disconnect the coolant reservoir overflow hose.
  7. Remove the radiator attaching bolts and brackets.
  8. Remove the radiator with the cooling fan attached.
  9. Remove the cooling fan and shroud from the radiator. NOTE: Check all cooling system hoses for any signs of damage, leaks or deterioration and replace if necessary. To install:
  10. Attach the cooling fan and shroud to the radiator and install the assembly.
  11. Attach the radiator bolts and brackets. Tighten the radiator bracket bolts to 7 ft. lbs. (10 Nm).
  12. Connect the coolant reservoir overflow hose.
  13. Connect the automatic transaxle cooling lines to the radiator, if equipped.
  14. Connect the upper and lower radiator hoses.
  15. Connect the fan motor and thermo-switch wire connector.
  16. Refill the system with the proper type and quantity of coolant, check for leaks and bleed the cooling system.
  17. Reconnect the negative battery cable. Fig. 8: Cooling system components — 1992–95 engines 86833086.gif
prev.gif next.gif

Aug 27, 2010 | 1991 Honda Civic

2 Answers

Is there some type of sensor that tells the thermostat to open or a sensor to tell the fan to come on if so whats the name of the sensor for 1995 acura legend my car just start doing this after i noticed a...


The thermostat on the radiator opens by heat automatically. The fan switch is run by the Engine temp Sensor and the ECM. If your fan is not running it is most likely a problem with the fan or the Temp sensor, I would look at the fan first.

Jun 23, 2010 | Cars & Trucks

1 Answer

I need to find a guide to replacing the radiator in a 1997 Volvo S90 w/ automatic transmission.


Volvo 1990-1998 Repair Guide
Radiator - REMOVAL & INSTALLATION
Perform this work only on a cold engine.
  1. Disconnect the negative battery cable.
  2. Set the heater control to MAX heat.
  3. Remove the expansion tank cap.
  4. Place a suitable drain pan into position. Open the **** on the right-hand side of the engine block. Fit a hose to the **** to collect the coolant. Open the radiator draincock.
  5. Close the drain cocks when the coolant is completely drained.
  6. Remove the cooling fan.
  7. Remove the cooling fan shroud.
  8. Disconnect the upper and lower radiator hoses
  9. 91a8f77.jpg
  10. On vehicles equipped with automatic transmissions, disconnect the transmission oil cooler lines at the radiator. Plug the lines immediately. Catch the spillage from the radiator in a separate pan.
  11. 379639b.jpg
  12. Some vehicles are equipped with a temp sensor on the drivers side top of the radiator, if equipped remove the connector.
  13. Remove the radiator retaining bolts and brackets.
  14. a2b05c9.jpg _506019a.jpg
  15. Remove the radiator assembly from the vehicle.
  16. 45887bc.jpg

On 850/C70/S70/V70 models, the radiator comes out the bottom of the vehicle.
To install:
  1. Place the radiator into position and install the retaining bolts.
  2. On automatic transmission vehicles, connect the oil cooler lines.
  3. Install the fan and shroud.
  4. Install the lower and upper radiator hoses.
  5. Connect the expansion tank hose. Make sure that the overflow hose is clear of the fan and is free of any sharp bends.
  6. Fill the cooling system through the expansion tank, with a 50 percent antifreeze, 50 percent water solution.
  7. Connect the negative battery cable.
  8. Run the engine until normal operating temperature is reached.
  9. Bleed the cooling system.
  10. Check for leaks.
  11. Top up the cooling system, as required.
  12. Replace the cap.
  13. Check and top up the automatic transmission fluid level.

Hope thats help (remember comment and rated this).

Apr 29, 2010 | 1997 Volvo S90

1 Answer

How do you change the radiator cooling fan for the 1997 ford thunderbird?


the radiator cooling fan runs when the AC is turned on, but it doesn't come on automatically when the engine gets warm. where is the relay or sensor that controls the fan when it gets warm?

Sep 19, 2009 | 1997 Ford Thunderbird LX

2 Answers

Radiator Fan continuously running with engine off, discharging battery


It is not the fault: for long time Renault has that concept, that is to prevent engine oveheating when coolant circulation is suddenly stopped.

Radiator fan can continue to work up to 10 minutes after engine is off. You should worry about it only if it wouldn't stop even after 10 minutes.

Oct 12, 2008 | 2000 Renault 181

Not finding what you are looking for?
2003 Suzuki Aerio Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...