Question about 1992 Dodge Dakota
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: heater control valve
Where is the thermostat in a dodge dakota 1992 located? Flushed it yesterday still just have heat blowinf ti side vents rather cool windsheild defrost. Maybe there is another problem?
Posted on Mar 14, 2009
hmm well there are 2 solutions to this that i can give cause i dont have the wiring diagram for that truck..
The first would be to set with a multimeter and test the wires under the dash for the hot, and axcessories wire.
The second would be to run 2 wires directly from the battery to the inside of the vehicle and connect the radio using that.
The second solution is self explained so lets discuss the first.
The truck came with an original radio. connected to this raid is a jack with a bunch of wires. remove the connector. with keys out the ignition test every wire until you get 12V.. thats your hot wire. this wire always has power. Now lable that wire and push it aside. turn the ignition on and test the remaining wires until you get 12v .. thats the ignition wire or acesories. this only has power with the ignition on. The remaining paired wires are for the speakers. connect the new deck and vonnect the wires one pair at a time to determine their location. or ypu can look at the wires connect directly to the speakers to see which wires go to which. .. you can use the body of the truck as a ground.
Posted on Apr 02, 2009
First no matter what check the oil level and then if it's a high rev tapping you need to allow the oil to flow through the engine block to try to coat and settle your valves.
But if it's really " knocking " sounds like your lifters and rocker arms are allowing your piston rods to clatter and that needs to be looked into fast.
Posted on Jul 27, 2009
Tips for a great answer:
Nov 12, 2016 | 1992 Dodge Dakota
Jan 09, 2016 | 1990 Dodge Dakota
Jan 06, 2016 | 1998 Dodge Dakota
Jan 05, 2011 | 1992 Dodge Dakota
Apr 06, 2010 | 1990 Dodge Dakota
Feb 24, 2010 | 1992 Dodge Dakota
Mar 06, 2009 | 1997 Dodge Dakota
Jul 01, 2017 | 1997 Dodge Dakota
Jan 09, 2017 | 1992 Dodge Dakota
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: