Question about 2001 Dodge Intrepid

1 Answer

P1684, P0622, P0403, P0134. These are the codes that I got from my scanner, what do they mean? Thank you

These codes showed up after, I replaced the battery and alternator with news ones. The battery light will not turn off. Can someone assist with these codes P1684= manufacturer control auxiliary inputs auxiliary outputs, P0622= generator F-term. field control , P0403= EGR flow circuit malfunction, P0134= 02 sensor CKT activity (bank 1 sensor 1). These are the explanations; however, I don't know how to fix this. Can someone please assist? I thank you in advanced for your time.

Posted by on

  • Angie Rodriguez
    Angie Rodriguez Apr 19, 2014

    P1684, P0622, P0403, P0134 plus, my last questions were taken care of already. I took my car into a shop and probem solved today, now I hope that is stays this way. Thanks to all that gave an advice.

  • Angie Rodriguez
    Angie Rodriguez Apr 19, 2014

    ... I thank my God as well. :-)

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 103 Answers

My guess is you may have wired something up wrong, or installed a faulty part. Either that or forgot to plug something back in while you were putting it back together. In other words replacing a battery and alternator shouldn't cause the oxygen sensor to go bad. So my suggestion is to check all plugs and wires to make absolutely certain everything is put back together correctly before you sink more money into fixing what's not broken. Haynes repair manuals list all the engine fault codes so for everyone else reading this, if you get codes check your manual or head to the library to look it up in theirs.

Posted on May 08, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fixitriteman
  • 431 Answers

SOURCE: Car idles fine, dies when accelerated

It is suggested that you always start with first code first. not knowing what code came first, and my experience with Dodge. i have found that them symptoms resemble a map,sensor/check vacuum hose and vacuum.

Posted on Apr 06, 2010

daves944
  • 1050 Answers

SOURCE: P0134 Error Code

The code refers to an oxygen sensor that is no longer detecting changes in fuel delivery by way of sensing exhaust oxygen content. Bank 1, sensor 1, tells you which sensor is bad, in this case, it's the sensor that is mounted before the catalytic converter, on the rear bank of cylinders as you look into the engine compartment. It would really be a good idea to change both pre-cat O2 sensors at this point as they are both twelve years old.

Posted on Mar 31, 2009

  • 560 Answers

SOURCE: how can i fix this code :P0622, 1999 dodge intrepid

alternator my friend

Posted on Jun 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does a confirmed code mean.states p0403 confirmed cel light stays on after replacing part


Did you reset the light after the part replacement? If you reset the light, the should read that the light is off (or show 'no codes') before the engine is started. If the light comes back on right away, with the same code, then replacing the part did not correct the problem.
A confirmed code simply means that the problem actually exists. For many codes, the first occurrence will not turn on the light. But if the situation happens again within a specific interval, it confirms the code and lights the light. Many scanners can also see the 'pending' codes (the first occurrence).

May 01, 2017 | Cars & Trucks

1 Answer

How to fix P0622 code


Related to computer and auxiliary output
Generator field F control circuit malfunction

Sep 26, 2015 | 2007 Pontiac Torrent AWD

2 Answers

2002 Chrysler PT cruiser has only 28,000 miles the engine light came on. I retrieved error codes p0134, p1684 and P1685. I found a list of the codes but no description. Can you tell me what these mean


I found the codes & basic (VERY basic) descriptions from these sources:
http://www.ptcruiserclub.ru/ptobderr.htm

http://kentuckyptcruisers.weebly.com/obdii-codes.html

Code P0134 O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1) - something to do with the O2 sensor circuit, but beyond that I'm not sure.

Code P1685 Skim Invalid Key - Security system issue. I got this answer from the Dodge Forum:

"The Sentry Key Immobilizer Module (SKIM) is part of the security system and kills the vehicle when a wrong key is used. There may be a problem with your key or the chip reader in the ignition switch. This is something the dealer will need to determine for sure. This code will also be set if someone actually tried to steal the vehicle."

http://dodgeforum.com/forum/2nd-gen-neon/162747-help-with-engine-code-p1685-invalid-skim.html

Hope this helps.

Dec 06, 2014 | 2002 Chrysler PT Cruiser

1 Answer

2001 Dodge Intrepid- What does P0622= Generator F-term. Field F control, and P0403= EGR flow circuit malfuntion mean? Thank you


If you've replaced those parts according to the codes, you need to have the codes cleared from the computer, otherwise the car will think you still have the bad parts on, and stay in what they call Limp Mode! Sometimes you can take it to an Autozone, and they can clear it for you! Otherwise you need to have a shop clear those computer codes for you!

Apr 18, 2014 | 2001 Dodge Intrepid

1 Answer

P0134 code


Since you are asking where the O2 sensors are, you may already have the answer to this question.
Code 134 is for no activity from bank one sensor one, which is in front of the catalytic converter. The sensor would need to be tested with a scanner.

Apr 23, 2013 | 1998 Mazda Millenia

1 Answer

Get code P0403 on 2001 Dodge Caravan...even after I just replaced the EGR valve twice (first replaced as thought might be faulty).....it cleared a few other codes related to EGR flow, but the P0403 ke


if you have a obd11 scanner, clear the codes and drive the vehicule for a while ,a good half an hour or so above 30 mph. this will give your onboard computer a chance to relearn system settings.if the code comes back there could be some other sensor malfunctioning or a problem with the onboard computer.ex corroded connections or broken pins.

Nov 26, 2011 | 2001 Dodge Caravan

1 Answer

2000 Ford Windstar 3.8.....engine light is on.....have been told that the following codes show up........P1171, P1175, P0131, P0134......what does it all mean and how much would it cost to correct?.....my...


After researching the codes you posted, I could only find only the last two, are you sure that the first two are in the correct sequence? however I did find a code P1117 and P1157.

Your stored codes P 131, P0134 are in reference to your 02 sensors, this may be due to faulty sensor input, ie: coolant sensors.

You will almost likely have to use a scanner to take the readings from your vehicle.

Jun 13, 2011 | Ford Windstar Cars & Trucks

1 Answer

Car won't start there is power to the starter. Starter is new. p1684 code the dash lights reset and says done and the the code p1684 comes on. Also you can not tell what gear the car is in there...


Hi,
I just wanted to show you what I found on the internet regarding p1684:
"P1684 engine code

The P1684 code simply means that the battery has been disconneted within the last 50 starts."

May 16, 2011 | 2002 Chrysler Voyager

1 Answer

How do i fix code p0403 p0405 and p0134 on 2000 pontiac granprix 3.1 lot v6


CODE PO134 - HO2S 11 BANK 1 SENSOR 1 INSUFFICIENT ACTIVITY CONDITIONS. CODE PO403 - EGR SOLENOID CONTROL CIRCUIT MALFUNCTION. CODE PO405 - EGR POSITION SENSOR CIRCUIT LOW INPUT CONDITIONS. PROBLEM COULD BE THE EGR SOLENOID OR EGR POSITION SENSOR.

Mar 25, 2011 | 2000 Pontiac Grand Prix

1 Answer

OBD/DTC '03 Dodge Grand Caravan 3.3L A604 Trans. P1684---PO134 Trouble codes


P0134 - bad O2 sensor, faulty wiring, blown heater circuit fuse, holes in exhaust, failed PCM

P1684 - Battery Disconnected Within Last 50 Starts

Sep 11, 2009 | 2003 Dodge Caravan

Not finding what you are looking for?
2001 Dodge Intrepid Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...