Question about 2000 Lincoln Navigator

1 Answer

How to change backup light bulb

Do i need to take out the whole back panel or can just pop the cover piece out?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 512 Answers

You need to remove complete housing. Taking the lens off will cause big problems with moisture or you may crack by removing this way.

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change my driver side back up light? Do I need whole assembly?


Year/make/model?? Most back up lights are designed to have a replaceable bulb. Some you can access from a removable panel in the trunk area and twist the bulb out. Others require the entire lens assembly to be removed for bulb access. The lenses are normally held in place with plastic type screws/clips

Jan 06, 2016 | Cars & Trucks

1 Answer

I have not light in my panel for the odometer on my 2004 Toyota Avalon. Everything else is good. How to I access panel to get to the lamp. Is it juse a pop out of the entire panel?


The dash is one whole large piece, with all the gauges, that has to be removed to gain access the bulbs that are inserted from the back in order to change them.

Jun 24, 2011 | Toyota Avalon Cars & Trucks

1 Answer

How to change rear break light of mazda autozam? We are having trouble in removing the rear light.Help please.Thanks


Remove some of the casing around the whole rear lighting panel (casing) and also corresponding screws. On top ( just in the middle) of the lighting panel there is a small rectangular space and inside has a kind of circular head connected to it. Using a Screwdriver a sort of a lever, gently insert it and try to pop that circle out by pulling/lever the screwdriver handle to the direction of the car side ( ie: right light panel pulling to the right-side of the car) this will make the whole lighting panel pop out, you can turn the whole panel now and expose where the bulbs are connected to the lighting panel. Unscrew the cover and then you can just pop the broken bulb out like an Edison type of bulb.

Apr 09, 2011 | 1992 Mazda MX-3

1 Answer

How do I get to the backup lights to replace them? Does the clear cover next to my license plate just pop off? I have a 1988 Cadillac Eldorado Biarritz, 2 door. Thanks for any help.


No u have to open your trunk,when u open it look down just behind the light u should see what looks like three or four big plastic wing nuts unscrew these and the whole light assembly will pull out so be careful not to drop it once u get this off the light to be changed should be on the back of the light assembly gently twist the bulb holder piece Counter Clock wise it should come out easy,pull old bulb out replace with new one ,turn the bulb holder clock wise to put back in,and reverse the steps putting the light assembly back just remember not to tighten the black wing nuts in the trunk to tight

Apr 03, 2011 | 1988 Cadillac Eldorado

1 Answer

How to change headlight on 2004 Mercury


When you open the hood you will see a cover where the hood latch is. Some covers have individual doors on each side of the hood latch. If you have that type just pop the release on the cover and reach down to the headlamp bulb. It comes out with a twist with the socket and then pull the bulb free. Use a kleenex or gloves to install new bulb and reverse the process.

If the whole panel is one piece there are some plastic button holders to remove to lift the cover. Your headlights are underneath. In some cases the passengers side headlight may require removing the battery to access. Then just twist the socket and remove the bulb afterwards, then reverse process.

Mar 18, 2010 | 2004 Mercury Grand Marquis

1 Answer

How do I replace the "Backup Lights" in my 2006 Nissan Murano?


You will need to remove the hatch trim panel, it has a hand hold that you have to pry out carefully, push in on the center buttons of the 4 plugs located at the bottom of the door trim, push in about 1/4" on the center little plug, then you can remove the complete plugs by prying under the edge. Once you pop the plugs out, push the plug you pushed in back out an additional 1/4' it will then be reusable to reattach the trim panel. The lights have to be removed, they snap in & you will need to pry on the side away from the switch end, they will pop out, remove the wiring noting the position for reassembly. Now that whole panel is removeable, it just snaps & pops off as it's held with a few clips & pawls. No screws or bolts.

If it's off, you'll be able to see the wiring to the back-up lights, twist counterclockwise & remove the bulb, reverse to reinstall.

It's not as tough as it sounds, I've had my cover off several times to work on the camera system.

good luck.

Feb 14, 2010 | 2006 Nissan Murano

2 Answers

How do you change a rear signal bulb in a 1990 toyota celica?


hi ders a plastic cap on the top of your rear light when u open the boot door,take out the screw under it and pop the cover off the orange piece on the side n unscrew the bolt..carefuly...it should just pop off then

Jun 20, 2009 | 1990 Toyota Celica

1 Answer

Change head light on 97 mustang


The actual light? or just the bulb inside the light?... If you mean the whole light then pop the hood and look around the lens and you will a few screws that hold it in place. Remove and replace. If you mean the bulb, pop the hood and and look behind the light cover and you will see where the light bulb attachment screws into the back. Unscrew the attachment and remove the bulb. When you replace with the new bulb be careful to not touch the bulb with your bare hands as a chemical reaction will cause the bulb to burn out faster than normal. Put it all back together as it was before and you are good to go. 

May 06, 2009 | 1997 Ford Mustang Cobra

1 Answer

Headlight bulb out


pop the hood take the plastic cover off it should have about 6 clips then unbolt the whole light from the car should be 2-3 screws and pull it out once u do that u might need to unscrew the plastic cover of the back to get to the wiring harness them u can change the bulb and reasmble

Feb 11, 2009 | 2004 Cadillac Deville

1 Answer

How do you change the breaklights?


The bulb itself comes out by gripping the assembly and "unscrewing" the whole piece. The whole bulb will come out from the rear of the assembly from inside the vehicle. Once you see how it comes out you will see how simple it is. Replace the bulb screw the assembly back in and off you go.
Good Luck

Nov 22, 2008 | 1988 Nissan Pathfinder

Not finding what you are looking for?
2000 Lincoln Navigator Logo

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

fordexpert

Level 3 Expert

5516 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...