Question about 2006 Volkswagen Transporter 1.9

1 Answer

Vw t5 alarm

Alarm red flashing light on drivers door,flashes sometimes?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

This could be your micro switch in the door lock itself , by a vw golf type four and other modelss you have an automatic locking function if you unlock your door but don't open it and most of the time it's the passengers door as it is used the least.firstly check the wiring to the lock and between the door and the body then checck the micro switch on the lock if its correctly seated and if its make a click when you press on the metal arm .

Posted on May 28, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: VW Bora, The ABS alarm

My EPC light magically appeared at 20K miles and the car squeaks like mad whenever it's moving. I don't notice any performance loss (engine-wise) in the car when the EPC light comes on but it won't let me switch gears from Park to R or D. I have an appointment next Friday to have it looked at. It's an automatic 2002 New BORA with JUST over 20K miles.

Posted on Sep 21, 2008

  • 41 Answers

SOURCE: VW Jetta 2002 lights on alarm and door alarm not working

thank you for responing

Posted on Mar 06, 2009

  • 1 Answer

SOURCE: 2006 vw jetta TDI- No power on drivers door.

WHAT IS THE RIGHT TIME TO CHANGE THE TIMMING BELT

Posted on Apr 22, 2009

  • 1 Answer

SOURCE: How do I disalarm my 1997 VW Cabrio Alarm?

I have a similiar problem occasionally. In my 97 vw, it usually happens when the battery terminals are loose. I just take them off, clean them and reconnect and the problem goes away for several months.

Posted on Jun 29, 2009

  • 1 Answer

SOURCE: Have a 2000 VW Beetle. The alarm won't turn off!

My 2000 Beetle does same thing (although not all the time). Just found an internet post that suggests there is a problem in the door lock sensor. I assume you are using a regular key - not
the keyless entry - like I am. He also said that you can disable the alarm (also disables the
keyless entry - which doesn't bother me) by leaving the front door AND the rear trunk open and
starting the car up. Seems to work so far. I will get the door lock sensor replaced and turn the
alarm system back on (not sure how yet), and let you know if that stops the problem.

Posted on Jul 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car won't fire up , alarm is silent even if if I open car when doors are locked with out pressing the remote control?


I would have the car's battery tested. Also, check your battery cables for looseness.

Nov 06, 2014 | Cars & Trucks

1 Answer

Red light on dash flashes


It is a factory alarm put the key in the driver door unlock the door and try it again should take care of your issue.

Dec 16, 2012 | 1998 Plymouth Neon

2 Answers

Can you supply me with the colour code for the wiring on the alarm/central locking unit under the dash on a 2002 vw golf ? i am fitting a remote start alarm and when i remotely lock the doors i need the vw...


This is what I have for the Golf 2001:

' ITEM ' WIRE COLOR 'POL' WIRE LOCATION '
' 12V 'red '+ 'ignition harness '
' STARTER 'red/gray '+ 'ignition harness '
' IGNITION 'black '+ 'ignition harness '
' ACCESSORY 'black/red '+ 'ignition harness '
' POWER LOCK 'yellow/blue '- 'drivers door module *1 '
' POWER UNLOCK 'green/red *2 '- 'drivers door module *1 '
' LOCK MOTOR 'purple/yellow ' 'drivers door module *1 '
' UNLOCK MOTOR 'blue/yellow ' 'drivers door module *1 '
' DISARM DEFEAT 'pur/yel or blu/yel ' 'passengers door module *3 '
' PARKING LIGHTS + 'gry/red & gry/blk ' 'drivers kick panel '
' HEADLIGHTS 'yellow/red '+ 'headlight switch '
' DOOR TRIGGER 'blue/gray *4 '- 'comfort module *5 '
' DOME SUPERVISION 'blue/gray '- 'comfort module *5 '
' TRUNK/HATCH PIN 'brn/blk or brn/blu '- 'hatch light '
' HOOD PIN 'brown/red '- 'comfort module *5 '
'TRNK/HTCH RELEASE 'brown/black '- 'comfort module *5 '
' FCTRY ALARM ARM 'arms w/ lock ' ' '
' FCTRY ALRM DISARM 'disarms w/ unlock ' ' '
' TACHOMETER 'green/stripe ' 'ignition coil '
' SPEED SENSE ' ' ' '
' BRAKE WIRE 'red/black '+ 'drivers kick panel '
' HORN TRIGGER 'black/yellow '+ 'comfort module *5 '
' WIPERS 'grn/yel and green '+ 'wiper motor

*1 The drivers door module is located in the drivers door.
*2 A double pulse will unlock all doors and disarm the factory alarm.
*3 The passengers door module is located in the passengers door.
*4 This wire will read the dome light delay. The avoid the dome light delay, use the separate door trigger wires and diode isolate each one. They are brown/white and are all located in their own door at their own door module.
*5 The comfort module is the main control module located under the drivers side of the dash.

Use this diagram for the door trigger isolation: motorsport.com/images/install_notes/149.jpg

Use DIAGRAM A.


Hope this helps.

May 22, 2011 | Volkswagen GTI Cars & Trucks

1 Answer

1997 Jetta alarm activates when I put the key in the ignition and turn. Beeps similar to when the car is being locked and the mini door alarm light activates so it is, in fact, setting the alarm which will...


I have this all the time what i tell the customer is let me remove the alarm system . The activation is in the door lock which always breaks by the way and people get stranded. Do this its the only way I can describe it when the alarm goes off. find the horn it will top section on driver side. Okay found it.take the single wire out it will disable the horn. but you will still have a horn not a alarm horn so we are still safe. now. find the starter there is a single wire that connects to the solenoid splice into that wire route that wire into the driver section and get another wire and attach it to the battery positive terminal all you will need now is a push button starter with the alarm on or off all you need to do is stick the key on if it doesnt crank then use you push button starter. that easy. or easy yet do you know where the starter relay is cross connect it and you defeated the alarm I do this for my customer VW alarm problem there are ways to defeat it and a few know how its cost too much doing the whole door thing and not worth it VW know there alarm sucks and people give up on it

Apr 22, 2011 | 1997 Volkswagen Jetta

1 Answer

I bought a 1996 Subaru Impreza L 4dr 5speed AWD that runs and starts fine but when I was installing fog lights i noticed that there appears to be an alarm hooked up (it says "code alarm elite DM...


Battery Constant 12v+ Positive Wire (+): Black/Yellow
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Blue/Red
Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Red
Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): Red/Yellow
Accessory Positive Wire Location: Ignition Switch Harness

Parking Light Positive Wire (+): Red
Parking Light Positive Wire Location: Low In Drivers Kick Panel

Power Door Lock Negative Wire (-): Add Actuator. This vehicle uses a central door locking system. When connecting a keyless entry, you will need to add a door lock actuator and some units will also require (2) extra relays.
Power Door Lock Negative Wire Location: To Drivers Door Only

Power Door Unlock Negative Wire (-): Add Actuator. This vehicle uses a central door locking system. When connecting a keyless entry, you will need to add a door lock actuator and some units will also require (2) extra relays.
Power Door Unlock Negative Wire Location: To Drivers Door Only

Door Trigger Negative Wire (-): Red/White
Door Trigger Negative Wire Location: In Black Plug, Above Hood Release

Domelight Supervision Wire: Use Door Trigger, Requires Relay
Domelight Supervision Wire Location: N/A

Horn Negative Wire (-): Red/Green
Horn Negative Wire Location: At Steering Column Harness

Tachometer Wire Negative Wire (-): Black/Blue
Tachometer Wire Negative Wire Location: At ECM, Under Drivers Side Dash

Brake Light Positive Wire (+): White/Black
Brake Light Positive Wire Location: At Switch Above Brake Pedal

CODE ALARM SYSTEM

Used on:
Impreza 1996-2001
Legacy 1995-1999
Forester 1998-2000

codealarmremote2.jpgBattery GP-23A

Lock: Left button will lock all doors. Double chirp indicates locked.
Unlock: Right button will unlock driver's door only. Hold unlock button app 6 seconds, it will unlock all doors including rear gate. Single chirp indicated unlock.
If the car chirps or lights flash 4x the alarm was triggered.
Panic. Press both buttons to activate emergency honk and flashing lights.
Valet mode: With optional alarm onlyPress the red alarm button on the left of the steering wheel. The light will quickly double flash. To re-set back to normal mode, press the red alarm light button again

Battery failed and lights flashing?
Parking lights will flash when the vehicle's battery is disconnected and reconnected.
To stop lights from flashing, either:
Press remote transmitter "UNLOCK" button once OR turn the ignition switch to the "ON" position and press programming button for one second (see below).
The vehicle interior (courtesy) light and door open warning light (DOOR AJAR indicator) will then illuminate for 60 seconds when the ignition is turned off, or until the doors are locked with the remote transmitter. Yes, the dashboard instrument panel lights will flash when the parking lights flash.

Programming or Overriding the Alarm when you have lost the remote
Open driver's door.
Turn ignition key to 'On'
Press and *hold programming button* in (see diagram, button under dashboard)
After 15 seconds the the door locks will cycle 3 times. Do not release Programming button.
Press lock (left) button the remotes to be programmed. The door locks will cycle one time. Exit programming mode by releasing Programming button under dashboard and turning key to off.


codealarmremote1.jpgCode Alarm Programming Button is under dashboard on the kick panel by the driver's left knee, left of the steering column. If you can't find it, it might still be tucked up in the wiring harness higher up in that same general area. The botton is recessed in a plastic ring (see diagram).
This button must be pressed while programming remotes or if the battery was disconnected and the lights are flashing.

Jan 05, 2011 | Subaru Impreza Cars & Trucks

2 Answers

I have a 1999 VW jetta and the panic alarm is goin off and wont let the car to start what do i do ?


What panic alarm? A red flashing light in the middle of the instrument panel? Why, that's the antilock brake system. type in vw instrument warning lights in the search bar and read on it.

Sep 25, 2009 | 1999 Volkswagen Passat

1 Answer

How to activate alarm 2001 bmw 325ix doors lockand unlock with key but alarm doesn't activate, lights don't flash (new car to me) if the indicator light flashes, does it mean that you have the alarm...


The flashing light does not mean you have an alarm. They were not standard in the 3-series.
You can get one installed or if you want the dealer can program the lights to flash when locking and unlocking doors even with out alarm. This is called "acknowledgement without DWA"

May 26, 2009 | 2001 BMW 325

1 Answer

Red light on will not work on the front driver side


do the doors lock and unlock correctly? if yes could be just a bad led bulb. if alarm doesn't work now have the aftermarket radio removed and disconnected. the computer on car monitors the radio so when an aftermarket unit is installed it will mess with the stock computer. VW makes us disconnect aftermarket radios before we are allowed to hook up diagnostic computer because of the problems that occur

Mar 23, 2009 | 2000 Volkswagen Golf

6 Answers

Jeep alarm will not turn off


The ignition security on/off is located at the trunk lock. unlock and lock rear gate and the alarm will turn off. My jeep sat in my drive for a month before a jeep tech told me this. It still triggers the security sometimes when I unlock the passenger door with the key and I go straight to the rear gate lock and it shuts off instantly.

Jun 27, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Volkswagen Transporter 1.9 Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...