Question about 2001 Dodge Durango
Hi Ronald, I'm glad to help! Here's what you need to do to see if you need a latch. First, we will check power and ground to the latch. You will need a test light to do this and a very long piece of wire. The long piece of wire is to make sure we have a good connection. First will check for power at the latch. RUN the long piece of wire from the negative battery cable all the way back to the hatch door. Hook the wire to your test light, turn the igniton key on and probe the power side at the connector on the latch itself, if it lights up then the power side is OK. NEXT: Move the long piece of wire from the negative battery cable to the positive battery cable. This will let us check the ground side going to the latch. NOTE: You will need a helper for this one, while probing the negative side of the connector at the latch have a helper push the release switch inside the vehicle. If the test light, lights up then the negative side is OK. NOTE: If you have both power and ground at the connector going to the latch, then replace the latch itself. If you do not have either power or ground then you'll need to check and see where its loosing it. Hope this helps and have an awesome day Ronald.
Posted on Jun 15, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 21, 2016 | 2008 Pontiac Torrent
Sep 16, 2015 | 2012 Ford Escape
Apr 15, 2013 | 2007 GMC Envoy Denali
Mar 19, 2013 | 2005 Ford Freestar
Dec 25, 2012 | 2010 GMC Yukon XL
Nov 18, 2012 | 2011 Hyundai Tucson
Jul 08, 2012 | 2007 Scion xA
Nov 22, 2011 | Cars & Trucks
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: